Enhanced luminescent properties of Y3Al5O12:Tb,Ce phosphor prepared by spray pyrolysis

Yttrium aluminum garnet (YAG) particles doped with Tb³⁺ or double doped with Tb³⁺ and Ce³⁺ were prepared by spray pyrolysis and characterized by photo- and cathode-luminescence. It was tried to incorporate a broad band of Ce³⁺ activator into the line peaks of Tb³⁺ in YAG host without the reduction of emission intensity. Ce-codoped YAG:Tb particles showed a broad band emission due to the d-f transition of Ce³⁺ and a reduction in the intensity of emission peaks due to ⁵D₃-⁷F_j (j=3, 4, 5, 6) transition of Tb³⁺ when they were excited by the ultraviolet light of 270 nm. These results supported that an effective energy transfer occurs from Tb³⁺ to Ce³⁺ in YAG host. Codoping Ce³⁺ ions greatly intensified the excitation peak at 270 nm for the emission at 540 nm of Tb³⁺, which means that more lattice defects, involving in the energy absorption and transfer to Tb³⁺, are formed by the Ce³⁺ codoping. The finding gives a promising approach for enhancing the luminescence efficiency.     

Quark-hadron duality in neutron (3He) spin structure

We present experimental results of the first high-precision test of quark-hadron duality in the spin-structure function g_{1} of the neutron and 3He using a polarized 3He target in the four-momentum-transfer-squared range from 0.7 to 4.0 (GeV/c);{2}. Global duality is observed for the spin-structure function g_{1} down to at least Q;{2}=1.8 (GeV/c);{2} in both targets. We have also formed the photon-nucleon asymmetry A1 in the resonance region for 3He and found no strong Q2 dependence above 2.2 (GeV/c);{2}.     

Evaluation of the dosimetric characteristics of a radiophotoluminescent glass dosimeter for high-energy photon and electron beams in the field of radiotherapy

We aimed to evaluate the suitability of a glass dosimeter (GD) for high-energy photon and electron beams in experimental and clinical use, especially for radiation therapy. We examined the expanded dosimetric characteristics of GDs including dose linearity up to 500 Gy, uniformity among GD lots and for individual GDs, the angular dependence, and energy dependence of 4 therapeutic x-ray qualities. In addition, we measured the dosimetric features (dose linearity, uniformity, angular dependence, and energy dependence) of the GD for electron beams of 10 different electron energy qualities. All measurements with the exception of dose linearity for photon beam were performed in a water phantom. For high-energy photon beams, dose linearity has a linear relationship for a dose ranging from 1 to 500 Gy with the coefficient of determination; R² of 0.998. The uniformity of each GD of dose measurements was within ±0.5% for four GD lots and within ±1.2% for 80 GDs. In terms of the effects of photon beam angle, lower absorbed doses of within 1.0% were observed between 60° and 105° than at 90°. The GD energy dependence of 4 photon beam energy qualities was within ±2.0%. On the other hand, the result of the dose linearity for high-energy electron beams showed well fitted regression line with the coefficient of determination; R² of 0.999 between 6 and 20 MeV. The uniformity of GDs exposed to the nominal electron energies 6, 9, 12, 16, and 20 MeV was ±1.2%. In terms of the angular dependence to electron beams, absorbed doses were within 2.0% between 60° and 105° than at 90°. In evaluation of the energy dependence of the GD at nominal electron energies between 5 and 20 MeV, we obtained responses between 1.1% and 3.5% lower than that for a cobalt-60 beam. Our results show that GDs can be used as a detector for determining doses when a high-energy photon beam is used, and that it also has considerable potential for dose measurement of high-energy electron beam.     

The effect of inflation pressure and vehicle loading on the sidewall of a radial tire

The sidewall is one of the regions where service failures occur in a pneumatic tire. Knowledge of the stresses or strains developed in the sidewall under varying service conditions is required if such pneumatic-tire failures are to be avoided. This paper describes an experimental investigation into the effect of inflation pressure, vehicle load and camber angle on the sidewall-surface strains in a radial tire. Photoelastic coating and a specially designed strain-gaging technique were used. For pure-inflation pressure, the magnitude of the measured shear strains in the sidewall is directly related to the inflation pressure. The maximum sidewall shear strains in pure inflation are located in the lower sidewall (18 mm from bead), irrespective of the magnitude of the inflation pressure. The mendional sidewall strain is predominant in the inflated but otherwise unloaded tire. The meridional strain is proportional to the square root of the inflation pressure. The maximum mendional strain is located in the mid-sidewall region. For a constant vehicle loading, there is a transition inflation pressure below or above which the circumterential shoulder strain increases sharply. This observation highlights the importance of maintaining satistactory inflation pressure in passenger-car tires as an under-inflated tire will induce severe strain development at the shoulder. In addition to the vehicle load, the introduction of camber angle produces localized change in the meridional and circumterential strains within the contact zone. The increase of camber angle up to 10 deg causes continuous increase in the meridional strain in the lower sidewall but decrease in the upper sidewall. The mid-sidewall meridional strains remain practically unchanged. The circumferential strains along the load line are, in general, lower due to the increase in camber angle.     

Ideals and Subalgebras in BCI-Algebras

We prove that there exists a maximal ideal of a BCI-algebra X in which each subalgebra is an ideal.AMS Subject Classification (1991): 06F35, 03G25.The second author was supported by the LG Yonam Foundation (1995).     

An optimal service rate in a Poisson arrival queue with two-stage service policy*

We consider a two-stage service policy for a Poisson arrival queueing system. The idle server starts to work with ordinary service rate when a customer arrives. If the number of customers in the system reaches N, the service rate gets faster and continues until the system becomes empty. Otherwise, the server finishes the busy period with ordinary service rate. After assigning various operating costs to the system, we show that there exists a unique fast service rate minimizing the long-run average cost per unit time.This work was supported by Korea Research Foundation Grant(KRF-2002-070-C00021).     

Multichannel transceiver dual-tuned RF coil for proton/sodium MR imaging of knee cartilage at 3 T

Sodium magnetic resonance (MR) imaging is a promising technique for detecting changes of proteoglycan (PG) content in cartilage associated with knee osteoarthritis. Despite its potential clinical benefit, sodium MR imaging in vivo is challenging because of intrinsically low sodium concentration and low MR signal sensitivity. Some of the challenges in sodium MR imaging may be eliminated by the use of a high-sensitivity radiofrequency (RF) coil, specifically, a dual-tuned (DT) proton/sodium RF coil which facilitates the co-registration of sodium and proton MR images and the evaluation of both physiochemical and structural properties of knee cartilage. Nevertheless, implementation of a DT proton/sodium RF coil is technically difficult because of the coupling effect between the coil elements (particularly at high field) and the required compact design with improved coil sensitivity. In this study, we applied a multitransceiver RF coil design to develop a DT proton/sodium coil for knee cartilage imaging at 3 T. With the new design, the size of the coil was minimized, and a high signal-to-noise ratio (SNR) was achieved. DT coil exhibited high levels of reflection S11 (～-21 dB) and transmission coefficient S12 (～-19 dB) for both the proton and sodium coils. High SNR (range 27-38) and contrast-to-noise ratio (CNR) (range 15-21) were achieved in sodium MR imaging of knee cartilage in vivo at 3-mm(3) isotropic resolution. This DT coil performance was comparable to that measured using a sodium-only birdcage coil (SNR of 28 and CNR of 20). Clinical evaluation of the DT coil on four normal subjects demonstrated a consistent acquisition of high-resolution proton images and measurement of relative sodium concentrations of knee cartilages without repositioning of the subjects during the same MR scanning session.     

Transparent p‐NiO/n‐ZnO diodes used in circuit rectifiers

We report on the fabrication of a transparent photostable cell circuit composed of drive and resistor diodes which are face‐to‐face connected to each other with different device area. The diodes consisted of e‐beam evaporated p‐NiO on sputter‐deposited n‐ZnO for p/n diode formation on indium‐tin‐oxide glass. Our transparent diodes show photostable rectifying behavior, about 10³ on/off current ratio and even dynamic rectification at a maximum frequency of 100 Hz AC input signal in ambient light. The noticeable photo‐responsivity of the circuit was obtained only under ultraviolet (UV) light. We conclude that our transparent diode circuit is promising in enriching the field of transparent device electronics. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Native oxide buried InAlAs ridge waveguide laser diode

InAlAs wet thermal oxidation process was adopted to fabricate ridge waveguide laser diodes. First, applying the oxidation process on the whole etched surface of an InAlAs upper cladding layer, we formed a current blocking and optical confining layer of ridge waveguide laser diode. This is a self-aligned structure, which makes the laser diode fabrication steps much simpler and etching-depth control less important. Assessment of the fabricated laser diode revealed that current-voltage characteristics and slope efficiency did not worsen, and threshold current was reduced by the oxidation process. PACS 85.35.Be; 42.55.Px