天然气在不同初始温度和压力下的燃烧特性研究

利用定容燃烧弹研究了不同初始温度和初始压力下的天然气燃烧特性,分析了初始温度、初始压力和当量比对其燃烧过程的影响.研究结果表明:随着初始温度的升高(300～450 K),天然气质量燃烧速率明显增加,燃烧持续期和火焰发展期显著缩短.随着初始压力的升高(0.1～0.75 MPa),天然气质量燃烧速率明显减慢,燃烧持续期和火焰发展期显著增长.且稀混合气和浓混合气条件下初始温度和初始压力的变化对燃烧持续期和火焰发展期的影响更明显.     

Dielectrophoretic assembly of ZnO nanowires

The synthesis of zinc oxide （ZnO） nanowires is achieved by vapor phase transportation （VPT） method. The designed quartz tube, whose both ends are narrow and the middle is wider, is used to control the growth of ZnO nanowires. Dielectrophoresis （DEP） method is employed to align and manipulate ZnO nanowires which are ultrasonic dispersed and suspended in ethanol solution. Under the dielectrophoretic force, the nanowires are trapped on the pre-patterned electrodes, and further aligned along the electric field and bridge the electrode gap. The dependence of the alignment yield on the applied voltage and frequency is investigated.     

Spectroscopic Properties and Electronic Structure of Bis(L—Histidine)Copper(II) Dinitrate Dihydrate

Electronic absorption spectrum, photoacoustic absorption spectrum and ESR spectrum of bis(L-histidine)copper(II) dinitrate dihydrate crystal were recorded. The experimental results are discussed quantitatively with ligand field theory (LFT) and the radial wave function of non-free copper(II). Our calculations coincides well with the experimental results, and in particular, provides significant correlations between the spectra and coordination structures. The ESR spectrum gives some information about the restudy of classification for the ESR spectra of bis(amino acidato)copper(II) complexs. Additionally, the differences between crystal and frozen solution spectra due to the variance of PH are also reported for the title compound.     

Anilinolysis of O‐butyl phenyl phosphonochloridothioate in acetonitrile: Synthesis,characterization, kinetic study,and reaction mechanism

This paper describes a simple optimized method for the synthesis of O‐butyl phenyl phosphonochloridothioate ( 4 ) under mild conditions. The target compounds were characterized by ¹H‐nuclear magnetic resonance (NMR), ¹³C‐NMR, and ³¹P‐NMR spectroscopy, as well as mass spectroscopy. The apparent structure of 4 was confirmed by optimization using the B3LYP/6‐311 + G(d,p) level in the Gaussian 09 program in acetonitrile. The nucleophilic substitution reactions of 4 with X‐anilines (XC₆H₄NH₂) and deuterated X‐anilines (XC₆H₄ND₂) were investigated kinetically in acetonitrile at 55.0°C. The free energy relationship with X in the anilines looked biphasic concave upwards with a break region between X = H and X = 3‐MeO, giving large negative ρ_X and small positive β_X values. The deuterium kinetic isotope effects were secondary inverse (k_H/k_D < 1: 0.789‐0.995) and the magnitudes, (k_H/k_D), increased when the nucleophiles were changed from weakly basic to strongly basic anilines. A concerted S_N2 mechanism is proposed on the basis of the selectivity parameters and the variation trend of the deuterium kinetic isotope effects with X.     

Comparison of shear banding in BMGs due to thermal-softening and free volume creation

This paper reports a comparative study of shear banding in BMGs resulting from thermal softening and free volume creation. Firstly, the effects of thermal softening and free volume creation on shear instability are discussed. It is known that thermal softening governs thermal shear banding, hence it is essentially energy related. However, compound free volume creation is the key factor to the other instability, though void-induced softening seems to be the counterpart of thermal softening. So, the driving force for shear instability owing to free volume creation is very different from the thermally assisted one. In particular, long wave perturbations are always unstable owing to compound free volume creation. Therefore, the shear instability resulting from coupled compound free volume creation and thermal softening may start more like that due to free volume creation. Also, the compound free volume creation implies a specific and intrinsic characteristic growth time of shear instability. Finally, the mature shear band width is governed by the corresponding diffusions (thermal or void diffusion) within the band. As a rough guide, the dimensionless numbers: Thermal softening related number B, Deborah number (denoting the relation of instability growth rate owing to compound free volume and loading time) and Lewis number (denoting the competition of different diffusions) show us their relative importance of thermal softening and free volume creation in shear banding. All these results are of particular significance in understanding the mechanism of shear banding in bulk metallic glasses (BMGs). Supported by the Chinese Academy of Sciences under the project “Multi-Scale Complex System” (Grant No. KJCX-SW-L08), the National Natural Science Foundation of China (Grant Nos. 10725211 and 10721202), and the Doctorial Start-up Fund of Hunan University of Science and Technology (Grant No. E50840)     

铁、铬、钒原子激发态的光电离截面

这篇文章分别在278～288nm、335～361nm、300～310nm激光波长范围内分别报道过渡金属中的铁原子、铬原子和钒原子的共振增强多光子电离(REMPI)的实验结果.实验中采用激光烧蚀和分子束相结合的技术制备金属原子.光离子产物由飞行时间质谱仪检测.根据共振电离离子信号对探测激光功率的依赖关系,得到原子激发态的光电离截面值.     

Ultrafast photo-induced turning of magnetization and its relaxation dynamics in GaMnAs

We report that,by linearly polarized pumping of different wavelengths,Kerr transients appear at zero magnetic field only in the case when GaMnAs samples are initialized at 3 K by first applying a 0.8 Tesla field and then returning to zero field.We find that,instead of magnetization precession,the near-band gap excitation induces a coherent out-of-plane turning of magnetization,which shows very long relaxation dynamics with no precession.When photon energy increases,the peak value of the Kerr transient incre...     

不同叶轮形式下离心泵噪声特性对比研究

针对具有无短叶片和有短叶片两种叶轮形式的离心泵,对设计状态下离心泵内部流场进行了全三维、非定常数值模拟,对比分析了其非定常流场特性和噪声辐射特性。流场分析表明:叶轮叶片和蜗舌的相互作用造成了叶片表面强烈的压力脉动,对长短叶片的叶轮形式,在局部增加长叶片表面压力脉动的同时,短叶片表面的压力脉动保持较低水平;同时能够有效降低泵体进口压力脉动,但出口压力脉动有所增强。以叶轮叶片表面作为声源辐射面,对比分析了两种叶轮的偶极子噪声辐射特性,结果表明:长短叶片结构通过改变声能在频域上的分布,从而能有效降低总声压级。     

Novel Microstrip Photonic Bandgap Cell Structures

In general, a planar microstrip photonic bandgap (PBG) structure os a periodic array of holes etched in the ground plane of a microstrip line. To use a circuit with a PBG, the PBG structure cannot be fixed on a metal base and needs to be shielded. In this paper, two kinds of novel microstrip PBG unit cells with special patterns etched in the strip line, which can be used as the conventional microstrip circuits, are proposed and analyzed in detail. The results show that the transmission line theory is valid for the theoretic analysis of PBG circuits.