Rational design of 3D dendritic TiO2 nanostructures with favorable architectures

Controlling the morphology and size of titanium dioxide (TiO(2)) nanostructures is crucial to obtain superior photocatalytic, photovoltaic, and electrochemical properties. However, the synthetic techniques for preparing such structures, especially those with complex configurations, still remain a challenge because of the rapid hydrolysis of Ti-containing polymer precursors in aqueous solution. Herein, we report a completely novel approach-three-dimensional (3D) TiO(2) nanostructures with favorable dendritic architectures-through a simple hydrothermal synthesis. The size of the 3D TiO(2) dendrites and the morphology of the constituent nano-units, in the form of nanorods, nanoribbons, and nanowires, are controlled by adjusting the precursor hydrolysis rate and the surfactant aggregation. These novel configurations of TiO(2) nanostructures possess higher surface area and superior electrochemical properties compared to nanoparticles with smooth surfaces. Our findings provide an effective solution for the synthesis of complex TiO(2) nano-architectures, which can pave the way to further improve the energy storage and energy conversion efficiency of TiO(2)-based devices.     

End-to-end azide-bridged manganese(III) chain compounds: field-induced magnetic phase transitions and variation of T(C) to 38 K depending on the side groups of the Schiff bases

Three one-dimensional coordination polymers [Mn(L)(N(3))](n) [L = L1 (1), L2 (2), L3 (3); L1H(2) = N,N'-bis(5-chlorosalicylideneiminato)-1,3-diaminopentane, L2H(2) = N,N'-bis(5-bromosalicylideneiminato)-1,3-diaminopentane, L3H(2) = N,N'-bis(5-bromosalicylideneiminato)-1,3-diamino-2-dimethylpropane] bridged by end-to-end azides were prepared. The crystal systems differ according to the Schiff bases used. Each Mn atom adopts a typical Jahn-Teller distortion. The helicity of the chains occurs in a racemic manner only for 2. No noncovalent forces are relevant in 2, while π-π contacts are visible in 1 and 3. Magnetic measurements show the presence of apparent spin canting. Complexes 1 and 3 exhibit a field-induced metamagnetic transition from an antiferromagnetic state to a weak ferromagnetic phase, whereas 2 embraces a field-induced two-step magnetic phase transition. The critical temperature is observed at 38 K for 2, which is relatively higher than those for 1 (11 K) and 3 (10 K). The pronounced long-range order may contribute from intrachain exchange couplings and through-space dipolar interactions between adjacent chains.     

Electrostatic interaction effect for human DNA separation with functionalized mesoporous silicas

This work describes the development of highly efficient human DNA separation with functionalized mesoporous silica (FMS) materials. To demonstrate the electrostatic interaction effect between the target DNA molecules and FMS, three aminofunctionality types comprised of a mono-, a di-, and a tri-amine functional group were introduced on the inner surfaces of mesoporous silica particles. Systematic characterization of the synthesized materials was achieved by solid-state ²⁹Si and ¹³C-NMR techniques, BET, FT-IR, and XPS. The DNA separation efficiency was explored via the function of the amino-group number, the amount used, and the added NaCl concentration. The DNA adsorption yields were high in terms of the use of triaminofunctionalized FMS at the 10 ng/L level, and the DNA desorption efficiency showed the optimum level at over 3.0 M NaCl concentration. The use of FMS in a DNA separation process provides numerous advantages over the conventional silica-based process.     

Helical silica nanotubes: Nanofabrication architecture,transfer of helix and chirality to silica nanotubes

A series of neutral gelators and cationic amphiphiles derived from 1,2 diphenylethylenediamine (I) and 1,2-cyclohexanediamine (II) was synthesised. Helical silica nanotubes were prepared utilising these organic gelators through sol-gel polycondensation of tetraethoxy silane, (TEOS-silica source). Right- and left-handed helical nanotubes respectively were obtained from a 1: 1 mass mixture of optically active, (1S,2S)-III-(1S,2S)-V neutral gelator and (1S,2S)-IV-(1S,2S)-VI cationic amphiphile and a 1: 1 mass mixture of optically active, (1R,2R)-III-(1R,2R)-V neutral gelator and (1R,2R)-IV-(1R,2R)-VI cationic amphiphile, indicating that the handedness of the helical nanotubes varied with the change in the neutral gelator precursors used. The nanotubes were characterised by SEM images.     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

THE SUSCEPTIBILITY OF MUNG BEAN CHLOROPLASTS TO PHOTOINHIBITION IS INCREASED BY AN EXCESS SUPPLY OF IRON TO PLANTS: A PHOTOBIOLOGICAL ASPECT OF IRON TOXICITY IN PLANT LEAVES

In an attempt to elucidate the underlying mechanisms for iron toxicity in plants, the combined effects of iron overload and light intensities on the photosynthetic capacity of leaves were particularly focussed upon in this study, using mung bean seedlings grown under varied conditions regarding the supply of light and iron. The seedlings, when supplied with excess iron (up to 1.0 m M ) and low light (40 W/m²), did not suffer any loss of photosynthesis; further, the typical symptoms of iron toxicity, as shown in the leaves grown in sunlight at ca 450 W/m² on an average, were not seen in those. Nonetheless, excess iron supply resulted in a marked increase in photosensitivity of the low light-adapted seedlings. A large portion of iron accumulated in chloroplasts by the supply of excess iron was found to be incorporated into thylakoids as nonheme iron (NHI), which acts as a potent sensitizer, photogenerating singlet oxygen (¹O₂). The generation rate of ¹O₂ from thylakoids linearly increased with increasing content of NHI; this was in parallel with the NHI content dependence of photoinactivation rates of photosynthetic electron transport and key enzymes of the Calvin cycle in chloroplasts. The results suggest that Fe-dependent photosensitization reactions, occurring via the ¹O₂ mechanism, may be deeply involved in cellular processes leading to developing iron toxicity symptoms in plants.     

Extending the scope of enantiomer separation by capillary supercritical fluid chromatography on immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex)

Immobilized polysiloxane-anchored permethyl-β-cyclodextrin (Chirasil-Dex) with a cyclodextrin content of approximately 30 % by weight, previously employed as a versatile chiral stationary phase for the separation of enantiomers by GC, has been used for the separation of enantiomers by capillary supercritical fluid chromatography (SFC). A considerable number of racemates could be resolved, e.g. aromatic alcohols, amino alcohols (TFA derivatives), and underivatized acids. Many pharmaceutical compounds were among those analyzed, including several NSAIDs (e.g. ibuprofen and ketoprofen), a steroidal drug (nor-gestrel), a barbiturate (hexobarbital), and others. Among the racemates resolved were many which cannot be analyzed by GC owing to low volatility or decomposition at elevated temperatures. For two racemates, analysis temperature and mobile phase density were systematically varied to give constant analysis times or capacity factors k. Low temperatures (ca 60 °C) yielded the best separation in term of separation factor, α, or resolution, R_s, even though higher densities had to be used. In comparison with GC, capillary SFC was able to furnish higher separation factors and similar resolution. The applicability of capillary SFC for the analysis of mixtures of cyclodextrin derivatives, e.g. those used in the synthesis of Chirasil-Dex, was, furthermore, demonstrated.     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.