Backward extensions of subnormal operators

The concept of backward extension for subnormal weighted shifts is generalized to arbitrary subnormal operators. Several differences and similarities in these contexts are explored, with emphasis on the structure of the underlying measures.

     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Proton relaxation times in human red bone marrow by volume selective magnetic resonance spectroscopy

In hematological diseases the composition of red bone marrow shows alterations. The relaxation timesT ₁ andT ₂ of water and lipids in human hemopoietic bone marrow of 14 normal volunteers and 10 patients with acute leukemia and bone marrow carcinosis are determined using a double spin echo spectroscopy sequencein vivo. The volumes of interest (VOI) of (13 mm)³ in the center of vertebral bodies are examined using different measurement parameters. ForT ₁ measurements an inversion-recovery method is used.T ₂ is evaluated from spectra with differentTE. T ₁ (water) is found in a range between 1000 and 1700 ms,T ₁ (lipids) in a range between 260 and 320 ms in healthy volunteers.T ₂ (water) is determined between 32 and 65 ms. In some cases phase distortions of the water signals occur in the spectra. Water flow within the VOI may be a possible reason.T ₂ (lipids) is evaluated between 73 and 91 ms. The patients with acute leukemia exhibit clearly reduced lipid signals in their spectra. Lipid relaxation times could not be determined in these cases.T ₂ (water) is prolonged in acute leukemia to 51–98 ms.T ₁ (water) was not significantly different from values of healthy volunteers in our measurements. Results are discussed in comparison to relaxometric data from imaging and STEAM spectroscopic methods of other authors.     

Dual effects of fullerene doped to holographic polymer dispersed liquid crystals

Doping of conductive fullerene particles to the formulation of conventional holographic polymer dispersed liquid crystal‐induced dual effects of reducing both droplet coalescence and operating voltage. Fullerene induced an induction period which otherwise does not exist, followed by a gradual increase of diffraction efficiency to a saturation value being increased with increasing fullerene content. The increased diffraction efficiency was caused by the decreased droplet coalescence which was due to the hindered migration of LC by the fullerene particles. On the other hand, doped fullerene particles augmented the conductivity of polymer phase and hence the local electrical field imposed on LC droplet, which overcome the threshold for driving and reduced operating voltage and response times. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5590–5596, 2007     

Time dependent analysis of finite buffer fluid flows and risk models with a dividend barrier

Based on the matrix-analytic approach to fluid flows initiated by Ramaswami, we develop an efficient time dependent analysis for a general Markov modulated fluid flow model with a finite buffer and an arbitrary initial fluid level at time 0. We also apply this to an insurance risk model with a dividend barrier and a general Markovian arrival process of claims with possible dependencies in successive inter-claim intervals and in claim sizes. We demonstrate the implementability and accuracy of our algorithms through a set of numerical examples that could also serve as test cases for comparing other solution approaches.      

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.     

On the analysis of the Gerber-Shiu discounted penalty function for risk processes with Markovian arrivals

In this paper, we consider an insurance risk model governed by a Markovian arrival claim process and by phase-type distributed claim amounts, which also allows for claim sizes to be correlated with the inter-claim times. A defective renewal equation of matrix form is derived for the Gerber-Shiu discounted penalty function and solved using matrix analytic methods. The use of the busy period distribution for the canonical fluid flow model is a key factor in our analysis, allowing us to obtain an explicit form of the Gerber-Shiu discounted penalty function avoiding thus the use of Lundberg’s fundamental equation roots. As a special case, we derive the triple Laplace transform of the time to ruin, surplus prior to ruin, and deficit at ruin in explicit form, further obtaining the discounted joint and marginal moments of the surplus prior to ruin and the deficit at ruin.