Intramitochondrial co-assembly between ATP and nucleopeptides induces cancer cell apoptosis

Mitochondria are essential intracellular organelles involved in many cellular processes, especially adenosine triphosphate (ATP) production. Since cancer cells require high ATP levels for proliferation, ATP elimination can be a unique target for cancer growth inhibition. We describe a newly developed mitochondria-targeting nucleopeptide (MNP) that sequesters ATP by self-assembling with ATP inside mitochondria. MNP interacts strongly with ATP through electrostatic and hydrogen bonding interactions. MNP exhibits higher binding affinity for ATP (−637.5 kJ mol⁻¹) than for adenosine diphosphate (ADP) (−578.2 kJ mol⁻¹). To improve anticancer efficacy, the small-sized MNP/ADP complex formed large assemblies with ATP inside cancer cell mitochondria. ATP sequestration and formation of large assemblies of the MNP/ADP–ATP complex inside mitochondria caused physical stress by large structures and metabolic disorders in cancer cells, leading to apoptosis. This work illustrates a facile approach to developing cancer therapeutics that relies on molecular assemblies.

Mitochondria-targeting nucleopeptide (MNP) can sequester ATP by self-assembling with ATP. A small nanosized MNP/ADP complex forms a large assembly with ATP. Thus, intramitochondrial co-assembly causes stress by large structures and apoptosis.     

Thermal stress calculations based on a linear viscoelastic deviatoric response and a fictive temperature component for the volumetric response

A temperature dependent thermal expansion coefficient is introduced into the Lee, Rogers and Woo linear viscoelastic model for calculating thermal stresses in glass. Volumetric strain, is calculated as follows: ? = α_liq (T_f - T_O) + α_gl (T - T_f) where α_liq and α_gl are the thermal expansion coefficients for the liquid and glassy states respectively, T is the glass temperature, T_O is the initial temperature, and T_f is the fictive temperature as defined by Tool. Fictive temperatures are calculatedfrom theory and measurements independent of thermal stress experiments. Comparison of calculated with experimentally measured stresses shows that the modified model is useful for predicting thermal tempering propensity for different glass compositions as well as different processing parameters.     

Trichoderma Enzymes for Degradation of Aflatoxin B1 and Ochratoxin A

The contamination of agricultural products with mycotoxins causes risks to animal and human health and severe economic losses. Mycotoxicoses can be reduced by preventing fungal infection using chemical and biological approaches. The chemical strategies can release toxic molecules; therefore, strategies for biological control are being evaluated, such as using nontoxic fungi and their metabolites. This work evaluated the effect of exoenzymes produced by the beneficial fungus Trichoderma afroharzianum strain T22 in degrading Aflatoxin B1 (AFB1) and Ochratoxin A (OTA). The ability of Trichoderma to produce hydrolases was stimulated by using different inducing substrates. The highest AFB1 and OTA degradation activity was obtained using a medium containing lyophilized mushrooms and crude fiber. The T. afroharzianum T22’s ability to reduce mycotoxins may be attributed to peroxidase enzymes. This study showed that T. afroharzianum strain T22 or its peroxidase supplementation could represent a sustainable strategy for the degradation of AFB1 and OTA in feed and food products.     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

ZnO–SnO2 branch–stem nanowires based on a two-step process: Synthesis and sensing capability

ZnO–SnO₂ branch–stem nanostructures were realized on a basis of a two-step process. In step 1, SnO₂-stem nanowires were synthesized. In step 2, ZnO-branch nanowires were successfully grown on the SnO₂-stem nanowires through a simple evaporation technique. We have pre-deposited thin Au layers on the surface of SnO₂ nanowire stems and subsequently evaporated Zn powders on the nanowires. The ZnO branches, which sprouted from the SnO₂ stems, had diameters in a range of 30–35 nm. As-synthesized branches were of single crystalline hexagonal ZnO structures. Since the branch tips were comprised of Au-containing nanoparticles, the Au-catalyzed vapor–liquid–solid growth mechanism was more likely to control the growth process of the ZnO branches. To test a potential use of ZnO–SnO₂ branch–stem nanostructures in chemical gas sensors, their sensing performances with respect to NO₂ gas were investigated, showing the promising potential in chemical gas sensors.     

Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.     

Micromorphology of epicuticular wax structures of the garden strawberry leaves by electron microscopy: Syntopism and polymorphism

Ultrastructural aspects of leaf epicuticular wax structures were investigated in the garden strawberry Fragaria × ananassa by scanning and transmission electron microscopy. Both the adaxial and abaxial surfaces of two cultivars (Maehyang and Red Pearl) were collected and subjected to surface observations and ultrathin sections. The most prominent leaf epicuticular wax structures included membraneous platelets and angular rodlets. Most wax platelets were membraneous, and appeared to protrude from the surface at an acute angle. Angular rodlets were usually bent and had rather distinct facets in the abaxial surface of the two cultivars. Membraneous platelets were predominant on the adaxial surface of Maehyang, whereas the adaxial surface of Red Pearl was characterized by angular rodlets. However, both cultivars possessed angular rodlets on the abaxial surface, simultaneously. The combination of air-drying without vacuum and in-lens imaging of secondary electron signals with a field emission gun could impart the superb resolution at low electron dose with minimal specimen shrinkage. In vertical profiles of the leaf epidermis, epicuticular waxes were observed above the cuticle layer, and measured approximately as 50 nm in thickness. The natural epicuticular waxes were seemingly mixtures of electron-dense microfibrils, and heterogeneous in shape on ultrathin sections. Distinct crystal-like strata could be hardly discernable in the wax structures. These results suggest that the garden strawberry has the nature of syntopism within one plant and polymorphism within the same species in the formation and occurrence of leaf epicuticular waxes.     

Subcentimeter depth resolution using a single-photon counting time-of-flight laser ranging system at 1550 nm wavelength

We demonstrate subcentimeter depth profiling at a stand off distance of 330 m using a time-of-flight approach based on time-correlated single-photon counting. For the first time to our knowledge, the photon-counting time-of-flight technique was demonstrated at a wavelength of 1550 nm using a superconducting nanowire single-photon detector. The performance achieved suggests that a system using superconducting detectors has the potential for low-light-level and eye-safe operation. The system's instrumental response was 70 ps full width at half-maximum, which meant that 1 cm surface-to-surface resolution could be achieved by locating the centroids of each return signal. A depth resolution of 4 mm was achieved by employing an optimized signal-processing algorithm based on a reversible jump Markov chain Monte Carlo method.     

Nonhost-associated proliferation of intrahyphal hyphae of citrus scab fungus Elsinoe fawcettii: refining the perception of cell-within-a-cell organization

Ultrastructural aspects of intrahyphal hyphae formation were investigated in Elsinoe fawcettii by transmission electron microscopy. Desiccated and hydrated cultures of E. fawcettii hyphae in liquid and solid media were prepared to determine the effects of water/nutrient availability and media fluidity on the formation of intrahyphal hyphae of the fungus. In all the culture conditions, intrahyphal hyphae were observed in enclosing hyphae. Electron-transparent hyphal cell walls clearly delimited intrahyphal hyphae from the cytoplasm of enclosing hyphae. Intrahyphal hyphae occupied most of the lumen of the enclosing hyphae, and showed intact hyphal cytoplasm with distinct organelles and inclusions. Intrahyphal hyphae were found to grow out of the degenerated hyphae that were almost devoid of cellular contents (simple intrahyphal hyphae). Some intrahyphal hyphae appeared to push aside a septum and passed into the adjacent hyphal cell. Besides a single intrahyphal hypha, instances were noted where enclosing hyphae contained several individual intrahyphal hyphae (multiple intrahyphal hyphae). Other enclosing hyphae contained intrahyphal hyphae, which also had intrahyphal hyphae (compound intrahyphal hyphae). The cell wall of intrahyphal hyphae showed the continuity with the cell wall of the enclosing hyphae. Concentric bodies typical of ascomycetes occurring in dry habitats were not found in all the types of hyphae. These results suggest that intrahyphal hyphae formation of E. fawcettii does not require plant defense responses. The fungus is thought to form intrahyphal hyphae during the saprophytic phase in ex planta ecological niches as well as the parasitic phase in host parts.