An advanced implementation of the Dantzig—Wolfe decomposition algorithm for linear programming

Since the original work of Dantzig and Wolfe in 1960, the idea of decomposition has persisted as an attractive approach to large-scale linear programming. However, empirical experience reported in the literature over the years has not been encouraging enough to stimulate practical application. Recent experiments indicate that much improvement is possible through advanced implementations and careful selection of computational strategies. This paper describes such an effort based on state-of-the-art, modular linear programming software (IBM's MPSX/370).     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Tomography of injection and acceleration of monoenergetic electrons in a laser-wakefield accelerator

A tomographic diagnosis method was developed to systematically resolve the injection and acceleration processes of a monoenergetic electron beam in a laser-wakefield accelerator. It was found that all the monoenergetic electrons are injected at the same location in the plasma column and accelerated from 5 to 55 MeV energy in 200 microm distance. This is a direct measurement of the real acceleration gradient in a laser-wakefield accelerator, and the experimental data are consistent with the model of transverse wave breaking and beam loading for monoenergetic electron injection.     

Vortices in superfluid fermi gases through the BEC to BCS crossover

We have analyzed a single vortex at T=0 in a 3D superfluid atomic Fermi gas across a Feshbach resonance. On the BCS side, the order parameter varies on two scales: k(F)(-1)and the coherence length xi, while only variation on the scale of xi is seen away from the BCS limit. The circulating current has a peak value jmax which is a nonmonotonic function of 1/k(F)a(s) implying a maximum critical velocity approximately v(F) at unitarity. The number of fermionic bound states in the core decreases as we move from the BCS to the BEC regime. Remarkably, a bound state branch persists even on the BEC side reflecting the composite nature of bosonic molecules.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Geometry of the quantum complex projective spaceCP q (N)

We study the constraints from theb→sγ decay in the parameter space of effective supergravities from orbifold string theory and with minimal supesymmetric particle content. Both the general dilaton-dominated universal scenario as well as a non-universal scenario for the soft terms are investigated. It is found that the recently reported CLEO upper and lower bounds constrain the parameter space of the models under scrutiny. In particular we find constraints on the values of the parameter tanβ and the gluino masses. In this class of string scenarios the negative sign of the Higgs mixing parameterμ, is phenomenologically preferred.