Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

TDI线扫相机光学通道建模与仿真

卫星相机建模与仿真研究不论在民用还是军事领域都具有重要的理论研究和实际应用价值。根据TDI线扫相机的工作原理建立了一个TDI线扫相机光学通道的数学模型,该模型包括从景物到TDI CCD离散图像的几何投影关系和能量传递关系两部分,对于确定的成像系统,给定景物参数和光学系统参数,就可以确定对应图像传感器上的离散图像。为了验证模型,对一幅卫星图像进行了计算机仿真。建立的模型可以用来研究当成像条件改变时对图像的影响,进一步还可以用来发展虚拟卫星相机系统。     

一种供应链中的知识管理绩效评价方法研究

作为知识管理的重要组成部分，知识管理绩效评价旨在帮助企业找出影响绩效提高的关键因素并及时采取有效措施，提高知识管理水平。本文从创造顾客价值、知识的获取能力、知识的共享与传播能力、知识的运用水平、知识的存量水平和知识管理平台等六个方面，分析了评价供应链的知识管理绩效应考虑的主要因素，建立了供应链的知识管理绩效评价指标体系，在此基础上，提出了运用D-S证据推理方法，对供应链知识管理绩效进行评价，并给出了证据推理的算法步骤，最后通过算例分析，说明该方法的有效性、实用性。     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.     

A Lagrangean heuristic algorithm for disassembly scheduling with capacity constraints

This paper considers the problem of determining the disassembly schedule (quantity and timing) of products in order to satisfy the demand of their parts or components over a finite planning horizon. The objective is to minimize the sum of set-up, disassembly operation, and inventory holding costs. As an extension of the uncapacitated versions of the problem, we consider the resource capacity restrictions over the planning horizon. An integer program is suggested to describe the problem mathematically, and to solve the problem, a heuristic is developed using a Lagrangean relaxation technique together with a method to find a good feasible solution while considering the trade-offs among different costs. The effectiveness of the algorithm is tested on a number of randomly generated problems and the test results show that the heuristic suggested in this paper can give near optimal solutions within a short amount of computation time.     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

非齐次微分方程两点边值问题正解的存在性及多重性

本文考虑一类非齐次微分方程的两点边值问题,得到了一些有关其正解存在性与多重性的精确条件．     

A family of maximal surfaces in Lorentz-Minkowski three-space

We prove the existence of an infinite family of complete spacelike maximal surfaces with singularities in Lorentz-Minkowski three-space and study their properties. These surfaces are distinguished by their number of handles and have two elliptic catenoidal ends.