Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

The feasibility of Al-based oxide precipitation in Fe–10%Cr alloy by ion implantation

This paper reports the feasibility of nano-oxide precipitate formation in Fe–Cr alloy by ion implantation synthesis. High contents of Al⁺ and O⁺ ions were implanted into thin films of high purity Fe–10%Cr alloy at room temperature and were studied by transmission electron microscopy (TEM) and atom probe tomography (APT). In contrast, to the common two-stage implantation/annealing scheme of precipitate ensemble synthesis by ion beams, cluster formation took place at the implantation stage in our study, requiring no subsequent high-temperature annealing. The post-implantation microstructural examination revealed in the as-implanted thin foil an array of precipitates with diameters in the range of 3–30?nm. The precipitate number density distribution was found to depend on the foil thickness. The precipitate enrichment with both Al and O was confirmed by the energy-filtered TEM analysis. Judging from the electron diffraction pattern and high-resolution TEM analysis, the crystal lattice of precipitates corresponds to some cubic modification of aluminium-rich oxide or pure aluminium oxide. The precipitate lattice alignment with the host matrix was revealed for at least a part of precipitates. The analysis of APT data using cluster detection algorithm indicates the presence of local zones enriched in Al and O, even in those areas of as-implanted samples where no clusters were visible by TEM.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Acoustic behaviour and equation of state of amorphous ethylene–vinyl acetate copolymer studied by means of high-pressure Brillouin scattering spectroscopy

The determination of the equation of state (EOS) of amorphous materials is very important for fundamental understanding of the glass transition and applications as well. Simultaneous observation of both longitudinal and transverse acoustic modes by Brillouin scattering spectroscopy has been one of the major methods to obtain EOS of amorphous materials. However, the transverse acoustic mode is hardly seen from some of the amorphous polymers, which makes it difficult to derive EOS. The temperature and pressure dependences of the acoustic properties of amorphous ethylene–vinyl acetate (EVA) copolymer were measured by using high-pressure Brillouin scattering spectroscopy. The temperature variation induced large changes in the frequency shift and linewidth of the longitudinal acoustic mode due to strong coupling between the structural relaxation process and the propagating density fluctuations. The residual linewidth in the glassy state was attributed to the remnant intramolecular motions of EVA, the activation energy of which was estimated to be ～3.30 ± 0.27 kcal/mol. The pressure–density relationship of EVA could be obtained for the first time by measuring the refractive index and using the Lorentz–Lorenz equation. The density and the refractive index exhibited monotonic increase up to approximately 12 GPa. The strong reduction of the acoustic damping at low pressures below ～3 GPa was attributed to the collapsing free volume in EVA. The present study clearly shows that measuring the refractive index by high-pressure Brillouin spectroscopy may be an alternative method to get the EOS of polymeric materials whose transverse acoustic mode is too weak to be observed.     

Surfaces with simple geodesics through a point

We study compact connected surfaces inm-dimensional Euclidean spaceE ^m (3 m 5) with a point through which every geodesic is aW-curve regarded as a curve in E^m.     

Minimizing Maximum Weighted Error for Imprecise Computation Tasks

We consider the problem of preemptively scheduling a set of imprecise computation tasks on m ≥ 1 identical processors, with each task T_i having two weights, w_i and w′_i. Two performance metrics are considered: (1) the maximum w′-weighted error; (2) the total w-weighted error subject to the constraint that the maximum w′-weighted error is minimized. For the problem of minimizing the maximum w′-weighted error, we give an algorithm which runs in O(n³ log²n) time for multiprocessors and O(n²) time for a single processor. For the problem of minimizing the total w-weighted error subject to the constraint that the maximum w′-weighted error is minimized, we give an algorithm which also has the same time complexity.     

Travelling wave mathematical analysis and efficient numerical resolution for a one-dimensional model of solid propellant combustion

We investigate a model of solid propellant combustion involving surface pyrolysis coupled to finite activation energy gas-phase combustion. Existence and uniqueness of a travelling wave solution are established by extending dynamical system tools classically used for premixed flames, dealing with the additional difficulty arising from the surface regression and pyrolysis. An efficient shooting method allows to solve the problem in phase space without resorting to space discretisation nor fixed-point Newton iterations. The results are compared to solutions from a CFD code developed at ONERA, assessing the efficiency and potential of the method, and the impact of the modelling assumptions is evaluated through parametric studies.