Electron spin resonance from annealed titania nanotubes

Titania nanotubes were prepared using a hydrothermal method. Hydrogen titanate nanotubes (H-TNTs) with an anatase phase changed to anatase nanocrystals at about 500 °C, and then a rutile structure at ∼800 °C. A sharp and symmetrical electron spin resonance (ESR) signal (g=2.003), attributed to a single-electron-trapped oxygen-vacancy (SETOV), was obtained at the annealed H-TNTs (T<500 °C). The SETOV signal increased and maximized remarkably at about 400–500 °C. Then, the nanotube structure appeared to be demolished. Yet, when the vacuum-heated H-TNTs were sealed in N₂ or Ar ambient, some additional ESR signals appeared besides the SETOV signal. The broad asymmetric ESR signal (g=1.98) was attributed to a surface oxygen vacancy related to the Ti³⁺ sites in a reduced TiO₂ matrix. The vacuum-heated sodium titanate nanotubes (Na-TNTs) showed only the SETOV signal (T<500 °C). PACS 61.46.Fg; 61.72.Ji; 76.30.-v     

Enhanced coercivity in sponge magnets with three dimensionally ordered nanopores

Nanoporous magnets are new promising materials particularly useful in biological assays and ion separations. This letter deals with a simple method for making porous magnets composed of cobalt ferrite, where polymer colloidal spheres were used as sacrificial templates. Compared with the bulk congener the porous cobalt ferrite shows enhancements in coercive field and magnetization, which could be associated with the presence of nanopores ordered three dimensionally. Using the sponge magnet complete removal of magnetic Cu and Fe ions was achieved while partial removal was observed with porous silicate having the same size of nanopores.     

Stress dependence of growth mode change of epitaxial layered cobaltite γ-Na0.7CoO2

We report stress dependence of growth characteristics of epitaxial γ-Na_0.7CoO₂ films on various substrates deposited by pulsed laser deposition method. On the sapphire substrate, the γ-Na_0.7CoO₂ thin film exhibits spiral surface growth with multi-terraces and highly crystallized texture. For the γ-Na_0.7CoO₂ thin film grown on the (1 1 1) SrTiO₃ substrate, the nano-islands of ∼30 nm diameter on the hexagonal grains are observed. These islands indicate that the growth mode changes from step-flow growth mode to Stranski-Krastanow (SK) growth mode. On the (1 1 1) MgO substrate, the large grains formed by excess adatoms covering an aperture between hexagonal grains are observed. These experimental demonstrations and controllability could provide opportunities of strain effects of Na_xCoO₂, physical properties of thin films, and growth dynamics of heterogeneous epitaxial thin films.     

Water self-diffusion in Chlorella sp. studied by pulse field gradient NMR

The water self-diffusion behavior in chlorella water suspension was investigated by pulsed field gradient NMR technique. Three types of water was determined, which differs according to the self-diffusion coefficients; bulk water, extracellular and intracellular water. Intracellular and extracellular water self-diffusion were restricted, and the sizes of restriction regions were 3.4 microm and 17 microm, respectively. The water molecular exchange process between these three diffusion regions was investigated. The residence time and exchange rate constant for chlorella cells were obtained. The cell wall permeability determined from the rate constant as 3 x 10(-6) m/s agreed with the permeability 10(-6) m/s obtained from time dependence of intracellular water self-diffusion coefficient. The structural cluster model of chlorella cell is estimated to describe the extracellular water self-diffusion in chlorella water suspension.     

In situ observation of dynamics of plasma self-channeling and bulk modification in silica glasses induced by a high-intensity femtosecond laser

The time-resolved dynamics of plasma self-channeling and refractive index bulk modification in silica glasses were first observed in situ using a high-intensity femtosecond (110 fs) Ti:sapphire laser (λ_p=790 nm). Plasma channeling is induced in silica glass at an irradiation higher than an input intensity of 1.5×10¹² W/cm² and photoinduces either the refractive-index modification or optical crack modification. In the domain of refractive-index modification, the lifetime of induced plasma self-channeling was 20 ps and the structural transition time for forming the refractive-index change was 10 ps. In the domain of optical cracks, however, the lifetime of induced plasma formation was 30 ps and the structural transition time for forming the optical cracks was 40 ps. According to electron spin resonance spectroscopic (ESP) measurement, it was found that the defect concentration of the SiE^′ center increased significantly in the refractive index modification region. A maximum value of the refractive-index change Δn was measured to be 1.6×10^-2. The intensity profile of the output beam transmitted through the refractive-index modification showed that the bulk modification produced a permanent optical waveguide. Received: 8 April 2002 / Accepted: 12 April 2002 / Published online: 22 November 2002 RID="*" ID="*"Corresponding author. Fax: +81-48/462-4682, E-mail: shcho@riken.go.jp     

Establishing norms for age-related changes in proton T1 of human brain tissue in vivo

The goal of this study was to determine the expected normal range of variation in spin-lattice relaxation time (T₁) of brain tissue in vivo, as a function of age. A previously validated precise and accurate inversion recovery method was used to map T₁ transversely, at the level of the basal ganglia, in a study population of 115 healthy subjects (ages 4 to 72; 57 male and 58 female). Least-squares regression analysis shows that T₁ varied as a function of age in pulvinar nucleus (R² = 56%), anterior thalamus (R² = 51%), caudate (R² = 50%), frontal white matter (R² = 47%), optic radiation (R² = 39%), putamen (R² = 36%), genu (R² = 22%), occipital white matter (R² = 20%) (all p < 0.0001), and cortical gray matter (R² = 53%) (p < 0.001). There were no significant differences in T₁ between men and women. T₁ declines throughout adolescence and early adulthood, to achieve a minimum value in the fourth to sixth decade of life, then T₁ begins to increase. Quantitative magnetic resonance imaging provides evidence that brain tissue continues to change throughout the lifespan among healthy subjects with no neurologic deficits. Age-related changes follow a strikingly different schedule in different brain tissues; white matter tracts tend to reach a minimum T₁ value, and to increase again, sooner than do gray matter tracts. Such normative data may prove useful for the early detection of brain pathology in patients.     

Effect of fluorine in Li1.27Cr0.2Mn0.53O2 cathode for secondary lithium batteries

Fluorine substituted Li_1.27Cr_0.2Mn_0.53O₂ electrode, prepared by sol–gel method, was investigated in the present work. Thermal analysis was done on this cathode material and found to be thermally stable with a loss of weight near 300 °C. Influence of fluorine substitution on the structural and electrochemical properties of the Li_1.27Cr_0.2Mn_0.53O₂ electrode was studied by X-ray diffraction (XRD) and field emission scanning electron microscope. XRD pattern of the fluorine-doped Li_1.27Cr_0.2Mn_0.53O₂ cathode material quenched at 900 °C indicates a phase pure material. The charge–discharge profile of the prepared cathode material showed that the fluorine substitution for oxygen in the cathode material resulted in improved capacity retention. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Ni thin films vacuum-evaporated on polyethylene naphthalate substrates with and without the application of magnetic field

We study the structural properties of the surface roughness, the surface mound size and the interfacial structure in Ni thin films vacuum-deposited on polyethylene naphthalate (PEN) organic substrates with and without the application of magnetic field and discuss its feasibility of fabricating quantum cross (QC) devices. For Ni/PEN evaporated without the magnetic field, the surface roughness decreases from 1.3 nm to 0.69 nm and the surface mound size increases from 32 nm to 80 nm with the thickness increased to 41 nm. In contrast, for Ni/PEN evaporated in the magnetic field of 360 Oe, the surface roughness tends to slightly decrease from 1.3 nm to 1.1 nm and the surface mound size shows the almost constant value of 28-30 nm with the thickness increased to 35 nm. It can be also confirmed for each sample that there is no diffusion of Ni into the PEN layer, resulting in clear Ni/PEN interface and smooth Ni surface. Therefore, these experimental results indicate that Ni/PEN films can be expected as metal/insulator hybrid materials in QC devices, leading to novel high-density memory devices.     

Transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si1−xCx nanocomposites mixed with Si nanoparticles and C atoms

Bright-field transmission electron microscopy (TEM) images, high-resolution TEM (HRTEM) images, and fast-Fourier transformed electron-diffraction patterns showed that n-butyl terminated Si nanoparticles were aggregated. The formation of Si_1−xC_x nanocomposites was mixed with Si nanoparticles and C atoms embedded in a SiO₂ layer due to the diffusion of C atoms from n-butyl termination shells into aggregated Si nanoparticles. Atomic force microscopy (AFM) images showed that the Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms existed in almost all regions of the SiO₂ layer. The formation mechanism of Si nanoparticles and the transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms are described on the basis of the TEM, HRTEM, and AFM results. These results can help to improve the understanding of the formation mechanism of Si nanoparticles.     

Numerical analysis of spatial evolution of the small signal gain in a chemical oxygen–iodine laser operating without primary buffer gas

A chemical oxygen–iodine laser (COIL) that operates without primary buffer gas has become a new way of facilitating the compact integration of laser systems. To clarify the properties of spatial gain distribution, three-dimensional (3-D) computational fluid dynamics (CFD) technology was used to study the mixing and reactive flow in a COIL nozzle with an interleaving jet configuration in the supersonic section. The results show that the molecular iodine fraction in the secondary flow has a notable effect on the spatial distribution of the small signal gain. The rich iodine condition produces some negative gain regions along the jet trajectory, while the lean iodine condition slows down the development of the gain in the streamwise direction. It is also found that the new configuration of an interleaving jet helps form a reasonable gain field under appropriate operation conditions.