Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

Omnidirectional reflector using nanoporous SiO2 as a low-refractive-index material

Triple-layer omnidirectional reflectors (ODRs) consisting of a semiconductor, a quarter-wavelength transparent dielectric layer, and a metal have high reflectivities for all angles of incidence. Internal ODRs (ambient material's refractive index n > 1.0) are demonstrated that incorporate nanoporous SiO2, a low-refractive-index material (n = 1.23), as well as dense SiO2 (n = 1.46). GaP and Ag serve as the semiconductor and the metal layer, respectively. Reflectivity measurements, including angular dependence, are presented. Calculated angle-integrated TE and TM reflectivities for ODRs employing nanoporous SiO2 are R(int)/TE = 99.9% and R(int)/TM = 98.9%, respectively, indicating the high potential of the ODRs for low-loss waveguide structures.     

Observation of the effects of radially sheared electric fields on the suppression of turbulent vortex structures and the associated transverse loss in GAMMA 10

Vortexlike turbulent structures in hot-ion mode plasmas with several keV are observed in the case with a radially produced weak shear of electric fields E(r). However, a strong E(r) shear formation due to a high ion-confining potential phi(c) production clears up these vortices together with plasma-confinement improvement and disappearance of both drift-wave and turbulencelike Fourier spectral signals. These findings are based on three-time progress in phi(c) in comparison to phi(c) attained 1992-2002. The significant advance of phi(c) is well extended in line with proposed potential-formation physics scalings.     

Gauge fields, geometric phases, and quantum adiabatic pumps

Quantum adiabatic pumping of charge and spin between two reservoirs (leads) has recently been demonstrated in nanoscale electronic devices. Pumping occurs when system parameters are varied in a cyclic manner and sufficiently slowly that the quantum system always remains in its ground state. We show that quantum pumping has a natural geometric representation in terms of gauge fields (both Abelian and non-Abelian) defined on the space of system parameters. Tunneling from a scanning tunneling microscope tip through a magnetic atom could be used to demonstrate the non-Abelian character of the gauge field.     

Orbital hybridization and charge transfer in carbon nanopeapods

We investigate the electronic structure of the fullerenes encapsulated inside carbon nanotubes, the so-called nanopeapods, using the first-principles study. The orbital hybridization of LUMO+1 (the state above the lowest unoccupied molecular orbital) of C60, rather than LUMO as previously proposed, with the nanotube states explains the peak at approximately 1 eV in recent scanning-tunneling-spectroscopy (STS) data. For the endohedral metallofullerenes nested in the strained nanotube, the charge transfer shifts the relative energy levels of the different states and produces a spatial modulation of the energy gap in agreement with another STS experiment.     

Strong lateral electron coupling of pb nanowires on stepped si(111): angle-resolved photoemission studies

We employ angle-resolved photoemission to characterize the electronic band structure of the Pb "nanowire" array self-assembled on a stepped Si(111) surface. Despite the highly oriented nanowires observed in scanning tunneling microscopy images, we find essentially two-dimensional Fermi contours modulated one dimensionally perpendicular to the wires. This strong two-dimensional and quasi-one-dimensional nature of the band structure explains the stability and anisotropy of the metallic phase down to 4 K as reported recently. A simple tight-binding model with each Si nanoterrace covered by a densely packed Pb overlayer successfully reproduces this modulated band structure and quantifies the electron coupling within the "nanostripes" and the step-edge potential.     

Evanescent tunneling of an effective surface plasmon excited by convection electrons

We introduce the subwavelength transmission of an effective surface plasmon beyond the light zone via the proximity interaction of convection electrons with a metal grating. A comparative analysis of dielectric homogenization and a finite-difference-time-domain simulation shows that out-of-phase-like modes (pi modes) have strong transmission below the cutoff frequency relying on the parametric condition of structural dimension and electronic energy. The synchronous spatial field and charge distribution of the pi mode system confirms the evanescent tunneling effect of the electron-coupled plasmons.     

Dielectrophoretically aligned GaN nanowire rectifiers

We demonstrate GaN nanowire (NW) current rectifiers which were formed by assembling n-GaN nanowires on a patterned p-Si substrate by means of alternating current (ac) dielectrophoresis. The dielectrophoresis was accomplished at a frequency of 10 kHz with three different ac bias voltages (5, 10, and 15 V_p–p), indicating that the number of aligned GaN nanowires increased with increasing ac bias voltage. The n-GaN NW/p-Si diodes showed well-defined current rectifying behavior with a forward voltage drop of 1.2–1.5 V at a current density of 200 A/cm². We observed that the GaN NW diode functioned well as a half-wave rectifier. PACS 71.20.Nr; 73.40.Cg; 73.40.Ei; 73.40.Kp     

Study of the mobility,surface area,and sintering behavior of agglomerates in the transition regime by tandem differential mobility analysis

The surface area of nanosized agglomerates is of great importance as the reactivity and health effects of such particles are highly dependent on surface area. Changes in surface area through sintering during nanoparticle synthesis processes are also of interest for precision control of synthesised particles. Unfortunately, information on particle surface area and surface area dynamics is not readily obtainable through traditional particle mobility sizing techniques. In this study, we have experimentally determined the mobility diameter of transition regime agglomerates with 3, 4, and 5 primary particles. Agglomerates were produced by spray drying well-characterised polystyrene latex particles with diameters of 55, 67, 76, and 99 nm. Tandem differential mobility analysis was used to determine agglomerate mobility diameter by selecting monodisperse agglomerates with the same number of primary particles in the first DMA, and subsequently completely sintering the agglomerates in a furnace aerosol reactor. The size distribution of the completely sintered particles was measured by an SMPS system, which allowed for the determination of the number of primary particles in the agglomerates. A simple power law regression was used to express mobility diameter as a function of primary particle size and the number of primary particles, and had an excellent correlation (R² = 0.9971) with the experimental data. A scaling exponent was determined from the experimental data to relate measured mobility diameter to surface area for agglomerates. Using this relationship, the sintering characteristics of agglomerates were also examined for varying furnace temperatures and residence times. The sintering data agreed well with the geometric sintering model (GSM) model proposed by Cho & Biswas (2006a) as well as with the model proposed Koch & Friedlander (1990) for sintering by viscous flow.