Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Vesicle Phases with Semipolar Additives

We examined the influence of semipolar additives on the phase behavior of mixed zwitterionic surfactant/consurfactant systems. It is shown that in these systems with increasing concentration esters like hexylacetate (HA) and ketones like hexylmethylketone (HMK) can behave both like consurfactants and like hydrocarbons. In solutions of 200 mM tetradecyldimethylamineoxide (TDMAO)/cosurfactant the additives cause first a phase transformation from the micellar L(1) phase to a lamellar L(alpha) phase. Upon further increasing concentration, the L(alpha) phase is transformed into a microemulsion. The L(alpha) phase consists of densely packed multilamellar vesicles. The vesicles are shown by electron microscopy. The multilamellar character of the vesicles is also reflected in the conductivity of the phase. It is up to 10 times lower than the conductivity of the L(1) phase. In some systems the vesicles are transformed on rest into a multidomain stacked L(alpha) phase. It is furthermore demonstrated that the two-phase L(1)/L(alpha) region in these systems is very narrow. In situations where enough HA is added to be close to the boundary of the L(1) phase, it is shown that very small amounts of cosurfactant can transform the L(1) phase into the L(alpha) phase. In extreme situations 1 mM cosurfactant is sufficient for transforming the L(1) phase with 200 mM TDMAO into the L(alpha) phase. In the investigated systems the L(alpha) phase is a highly viscoelastic fluid in which the storage modulus is 1 order of magnitude larger than the loss modulus. Besides the conventional way to prepare samples by adding all ingredients and stirring the solution intensively, all investigated systems were additionally prepared without applying any shear forces. In a surfactant/cosurfactant solution the additive was brought into the sample by diffusion. The phase behavior of both types of samples showed fundamental differences in some cases, which give insight into the influence of shear forces on these systems. Copyright 2001 Academic Press.     

A novel technique to specifically analyze the secretome of cells and tissues

The secretome of cells and tissues may reflect a broad variety of pathological conditions and thus represents a rich source of biomarkers. The identity of secreted proteins, usually isolated from cell supernatants or body fluids, is hardly accessible by direct proteome analysis, because these proteins are often masked by high amounts of proteins actually not secreted by the investigated cells. Here, we present a novel method for the specific detection of proteins secreted by human tissue specimen as well as cultured cells and chose liver as a model. The method is based on the metabolic labelling of proteins synthesized during a limited incubation period. Then, the cell supernatant is filtered, precipitated, and subjected to two-dimensional gel electrophoresis. Whereas fluorography detected a large number of proteins derived from residual plasma and dead cells, the autoradiographs selectively displayed genuinely secreted proteins. We demonstrate the feasibility of this approach by means of the secretomes of the hepatocellular carcinoma-derived cell line HepG2 and human liver slices. The selective identification of cell- and tissue-specific protein secretion profiles may help to identify novel sets of biomarkers for wide clinical applications.     

Ab initio investigation of the potential energy surfaces of C2H2F2 and C2H2F2+

Ab initio MO calculations have been performed for neutral and cationic C₂H₂F₂ structures. Olefinic and carbene structures are investigated for the neutral isomers, while olefinic, carbene, and fluoronium-type cations are found. Stability orders and rotational barriers are discussed in terms of orbital and Coulomb interaction. Contrary to previous studies, the higher stability of the geminal isomers is interpreted to be caused by Coulomb attraction.     

Matrix isolation infrared and ab initio study of the hydrogen bonding between formic acid and water

The infrared spectra of the formic acid-water complexes isolated in argon matrices are reported. Both supersonic jet expansion and a conventional effusive source followed by trapping in solid argon at 10K are used to obtain the matrices. The experimental IR spectra are compared to the data obtained from high level ab initio (MP2) and DFT (B3LYP) calculations with 6-311++G(d,p) and aug-cc-pVTZ basis sets. The complex formation results in red shifts in the C=O and O-H stretching vibrations and a blue shift in the C-O stretching vibration of formic acid. The O-H stretching modes of water also exhibit pronounced red shifts. Both the MP2 and B3LYP calculations located three minima corresponding to cyclic HCOOH...H2O complexes with two hydrogen bond interactions. The binding energies are -10.3, -5.1, and -3.5 kcal mol(-1), respectively, for the three complexes at the MP2/ aug-cc-pVTZ level, corrected for the basis set superposition error (BSSE) using the Boys-Bernardi counterpoise scheme. Comparison of the calculated frequencies of the three complexes with the matrix IR spectrum reveals that the lowest energy complex is formed. In addition, a complex of formic acid with two water molecules is observed.     

Strain effects in electron spin resonance spectroscopy of quintet 2,6-bis(4'-nitrenophenyl)-4-phenylpyridine

Photolysis of 2,6-bis(4'-azidophenyl)-4-phenylpyridine in 2-methyltetrahydrofuran (2MTHF) glass at 7 K leads to quintet 2,6-bis(4'-nitrenophenyl)-4-phenylpyridine as a mixture of rotational isomers. The electron spin resonance (ESR) spectrum of this mixture of rotamers shows a considerable broadening of many transitions in the range of 0-5000 G and cannot be reproduced by computer simulations solely based on the tuning of the spin Hamiltonian parameters g, D(Q), and E(Q) alone or on predictions of DFT calculations. The best modeling of the experimental ESR spectrum is obtained only when the large line-broadening parameter of Γ(E(Q)) = 1200 MHz along with the spin Hamiltonian g = 2.003, D(Q) = 0.154 cm(-1), and E(Q) = 0.050 cm(-1) is used in the spectral simulations. The most accurate theoretical estimations of the magnetic parameters of the dinitrene in a 2MTHF glass are obtained from the B3LYP/6-311+G(d,p)+PBE/DZ/COSMO calculations of the spin-spin coupling parameters D(SS) and E(SS). Such calculations overestimate the E(Q) and D(Q) values of the dinitrene just by 1% and 10%, respectively, demonstrating that contributions of the spin-orbit coupling parameters D(SOC) and E(SOC) to the total D(Q) and E(Q) values are negligibly small. The research shows that ESR studies of polynuclear high-spin nitrenes, obtained by photolysis of rotational isomers of the starting azides, can only be successful if large E(Q) strain effects are taken into account in the spectral simulations.     

Ethanol/water solutions as certified reference materials for breath alcohol analyzer calibration

The Federal Institute for Materials Research and Testing (BAM), Germany, has issued a series of large volume ethanol in water certified reference materials (CRMs), primarily developed for the calibration of evidential breath alcohol analyzers in Germany. The certified parameter is the ethanol mass concentration at 20 °C. When used in a wet bath simulator, the solutions deliver gas samples that meet the requirements set by the Organization of Legal Metrology for calibration of breathalyzers. The materials were prepared gravimetrically by spiking of ethanol into water in single 5 L units. A complete uncertainty budget for the preparation process has been established. The purity of the commercial ethanol stock solution was identified to be the main source of uncertainty. For stability and homogeneity measurements and for the verification of the gravimetric mass concentration of the CRMs, a robust high-precision gas chromatography, with flame-ionization detection method for ethanol determination in aqueous samples was developed and validated. The good performance of this method has been demonstrated in several international comparisons organized by the Consultative Committee for Amount of Substance—Metrology in Chemistry at the International Bureau of Weights and Measures.     

Heavy‐Atom Tunneling in the Ring Opening of a Strained Cyclopropene at Very Low Temperatures

The highly strained 1H‐bicyclo[3.1.0]‐hexa‐3,5‐dien‐2‐one 1 is metastable, and rearranges to 4‐oxacyclohexa‐2,5‐dienylidene 2 in inert gas matrices (neon, argon, krypton, xenon, and nitrogen) at temperatures as low as 3 K. The kinetics for this rearrangement show pronounced matrix effects, but in a given matrix, the reaction rate is independent of temperature between 3 and 20 K. This temperature independence means that the activation energy is zero in this temperature range, indicating that the reaction proceeds through quantum mechanical tunneling from the lowest vibrational level of the reactant. At temperatures above 20 K, the rate increases, resulting in curved Arrhenius plots that are also indicative of thermally activated tunneling. These experimental findings are supported by calculations performed at the CASSCF and CASPT2 levels by using the small‐curvature tunneling (SCT) approximation.