Atomabsorptions-Flammenphotometrie im Einstrahlverfahren mit Kompensation der von Flamme und Hintergrundstrahler verursachten Schwankungen

Zusammenfassung Es wird gezeigt, daß auch im Einstrahlverfahren sogar extrem starke Schwankungen der Betriebsparameter der Flamme (Brenngas- und Preßluftdruck, Probendurchsatz) aus dem Meßergebnis weitgehend eliminiert werden können, wenn hinreichend oft Zwischeneichungen vorgenommen werden. Auf die gleiche Weise kann man selbstverständlich auch zeitliche Änderungen der Emission des Hintergrundstrahlers ausschalten. Für die Voruntersuchungen wurde ein aus handelsüblichen Bauteilen zusammengestelltes Gerät benutzt, welches mehr als 15 Zwischeneichungen pro Minute zuläßt. Dabei zeigte sich unter anderem, daß eine Änderung des Probendurchsatzes um den Faktor 10 (innerhalb 1 min) eine Änderung des Extinktionswertes der Probe um den Faktor 4 (also 400%) zur Folge hat. Dagegen beträgt in dieser Meßreihe die größte beobachtete Abweichung einer Einzelmessung des Extinktionsverhältnisses Analysenlösung/Eichlösung vom Mittelwert nur 22%. Abschließend wird ein in der Entwicklung befindliches und weitgehend automatisiertes Gerät vorgeschlagen, welches wesentlich bessere Ergebnisse erwarten läßt.

---

Summary It is shown that even for atomic-absorption analyses with a single-beam instrument, the values measured will be essentially independent on large fluctuations in the operating conditions of the flame (gas pressures and sample flow rate), if the standard measurement made after every sample measurement is repeated often enough. Naturally, with the same technique the variation of emission from the discharge lamp will also not affect the analytical results. For the first experiments an instrument composed of commercially available components was used. It allowed the sample solution and standard solution to be alternately aspirated more than 15 times per minute. It was observed that the extinction value for the sample solution changed by a factor of 4 (that is 400%) when the sample flow rate changed by a factor of 10 (within a minute). On the other hand, in this series of measurements the gratest deviation observed between a single value for the ratio of sample solution extinction/standard solution extinction and the average value amounted to only 22%. Finally, an essentially automatic instrument being developed is proposed. With this instrument considerably better results can be expected.

---

---

Herrn Prof. Dr. R. Herrmann möchte ich auch an dieser Stelle meinen Dank aussprechen für sein reges Interesse am Fortgang der Arbeit und für die kritische Durchsicht des Manuskriptes. Fräulein B. Gutsche danke ich für die Mitarbeit bei der Durchführung und Auswertung der Messungen.     

Chitosan-mediated and spatially selective electrodeposition of nanoscale particles

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.     

Direct high-performance liquid chromatographic method for enantioselective and diastereoselective determination of selected pyrethroic acids

This study reports on the direct HPLC stereoisomer separation of selected pyrethroic acids employing commercial cinchona alkaloid derived chiral stationary phases (CSPs). cis/trans-Chrysanthemic acid (cis/trans-CA), cis/trans-chrysanthemum dicarboxylic acid (cis/trans-CDCA), cis/trans-permethrinic acid (cis/trans-PA), and fenvaleric acid (FA) were resolved into the individual stereoisomers, i.e. enantiomers and diastereomers as well. To achieve satisfactory baseline separation an optimisation of the variables of the chromatographic method including chemical structure of the cinchona carbamate CSP, mobile phase composition, and flow rate was required. All four stereoisomers of PA were successfully separated in a single run (alphacis = 1.20, alphatrans = 1.26, critical Rs = 1.65) with an acetonitrile (ACN)-based polar-organic eluent. The complete baseline resolution of all CA stereoisomers succeeded in polar-organic (alphacis = 1.20, alphatrans = 1.35, critical Rs = 3.03) as well as in acetonitrile-based reversed-phase media (alphacis = 1.24, alphatrans = 1.22, critical Rs = 2.73). The latter elution mode was also found to be suitable for the enantio- as well as diastereoselective resolution of CDCA (alphacis = 1.09, alphatrans = 1.50, critical Rs = 1.43), which is to the best of our knowledge the first reported enantiomer separation of this analyte. The enantiomers of FA could be baseline separated employing also reversed-phase mode (alpha = 1.16, Rs = 2.91). These separation methods may be applied for quality control processes in the production of stereoisomerically pure insecticides as well as stereoselective toxicokinetic studies, as CDCA, PA, and FA are suitable biomarkers for monitoring human pyrethroid burden.     

Characterization of the thermally induced topochemical solid-state transformation of NH4[N(CN)2] into NCN[double bond]C(NH2)2 by means of X-ray and neutron diffraction as well as Raman and solid-state NMR spectroscopy

The mechanism of the solid-solid transformation of NH(4)[N(CN)(2)] into NCN[double bond]C(NH(2))(2), which represents the isolobal analogue of W?hler's historic conversion of ammonium cyanate into urea, has been investigated by temperature-dependent single-crystal and powder X-ray diffraction, neutron powder diffraction, and Raman and solid-state NMR spectroscopy as well as thermoanalytical measurements. The transformation of the ionic dicyanamide into its molecular isomer upon controlled thermal treatment was found to proceed topochemically in the solid state with little molecular motion, giving rise to a single-crystal to single-crystal transformation which manifests itself by a defined metric relation between the unit cells of the two isomers. The exothermic phase transition is thermally activated and was observed to commence at temperatures > or =80 degrees C. The pronounced temperature dependence of the onset of the transformation may be assessed as an indication for the metastability of ammonium dicyanamide at elevated temperatures. Thermal analyses reveal a decrease in the reaction enthalpy (56-13 kJ mol(-1)) at higher heating rates and an average mass loss of 10% gaseous ammonia. Evidence was found for crucial mechanistic steps of the transformation, which is likely to proceed via proton transfer from the ammonium ion to one of the terminal nitrogen atoms of the anion. The protonation is followed by nucleophilic attack of the in situ generated ammonia at the electrophilic nitrile carbon. The proposed mechanistic pathway is based on the results of combined Raman and solid-state NMR spectroscopic as well as neutron powder diffraction measurements.     

Production of indigotin in submerged culture using morchella nov. ES-1

A new strain of the fungusMorchella nov. ES-1 (ATCC 20951) that produces blue pigment in submerged culture has been isolated. The blue pigment was extracted by chloroform or ethyl acetate treatment. The crude extract when chromatographed yielded three fractions; a blue one has been identified by mass spectrometry as indigotin. Fermentation studies using enriched media revealed that maximum accumulation of indigotin in culture was approx 24 mg/L in 168 h.     

Geometro-stochastic quantization of a theory for extended elementary objects

The geometro-stochastic quantization of a gauge theory based on the (4,1)-de Sitter group is presented. The theory contains an intrinsic elementary length parameter R of geometric origin taken to be of a size typical for hadron physics. Use is made of a soldered Hilbert bundle over curved spacetime carrying a phase space representation of SO(4, 1) with the Lorentz subgroup related to a vierbein formulation of gravitation. The typical fiber of is a resolution kernel Hilbert space constructed in terms of generalized coherent states related to the principal series of unitary irreducible representations of SO(4, 1), namely de Sitter horospherical waves for spinless particles characterized by the parameter . The framework is, finally, extended to a quantum field-theoretical formalism by using bundles with Fock space fibers constructed from .Supported in part by NSERC Research Grant No. A5206.     

The mean square of Dirichlet series associated with automorphic forms

Letf be a non-holomorphic automorphic form of real weight and eigenvalue λ=1/4?ρ ², ?ρ≥0, which is defined with respect to a Fuchsian group of the first kind. Assume that ∞ is a cusp of this group and denote bya _∞,n,a _∞,n ,n ∈ ?, the Fourier coefficients off at ∞. Following Hecke and Maas we prove that under suitable assumptions the associated Dirichlet seriesL ⁺ (f, s) = ∑ _{n > 0} a _∞,n (n + μ_221E;)^?s andL ^? (f, s) = ∑ _{n < 0} a _∞,n |n + μ_221E;|^?s have meromorphic continuation in the entire complex plane and statisfy a certain functional equation (μ_∞ denotes the cusp parameter of the cusp ∞). We are interested in mean square estimates of these functions. Iff is not a cusp form we prove $$\int_0^T {|L^ \pm (f,\Re _\rho + it)|^2 dt = T(\log T)^a (B^ \pm + o(1)),}$$ wherea is either 1, 2 or 4, andB ^± is a constant. A similar result is true iff is a cusp form. In case of a congruence group the termo(1) can be replaced byO ((logT)^?1).     

Zur Synthese von Human-Big-Gastrin I

The synthesis of the tetratriacontapeptide amide corresponding to the revised primary structure of human big gastrin I is described. For this purpose the fragments were designed in view of the maximum use of those utilized in our previous synthesis of human big gastrin I according to the first sequence proposal. Consequently the key tripeptide-Pro-Pro-His- (sequence 7–9) was prepared in suitably protected form to be used as amino or carboxyl component for assembly of the segments 1–9 and 1–14, respectively. Final condensation of the latter nona- and tetradecapeptide derivatives with the C-terminal segments 10–34 and 15–34 via the azide and the dicyclohexylcarbodiimide/N-hydroxysuccinimide procedure, respectively, leads to crude fully protected human big gastrin I. Upon deprotection by exposure to trifluoroacetic acid in presence of ethanedithiol-(1,2) as scavanger, ion exchange chromatography and partition chromatography, the desired tetratriacontapeptide amide was isolated in satisfactory yield with a high degree of purity. The identical immunological behaviour of the synthetic material, if compared with that of natural human big gastrin I, represents ulterior strong evidence for the correctness of the newly proposed structure for this putative prohormonal form of the gastrins.

Kurzmitteilung:Wünsch E., Wendlberger G., Mladenova-Orlinova L., Göhring W., Jaeger E., Scharf R., Gregory R. A., Dockray G. J., Hoppe-Seyler's Z. Physiol. Chem.362, 179 (1981).     

Massenspektrometrische Untersuchung von Amiden: III—Intramolekulare Nucleophile Substitution bei der Methyl-Abspaltung aus Crotonsaurepiperidid und Vinylogen Derivaten

The methyl cleavage from piperidides of type CH₃(CH?CH)_nCONC₅H₁₀ with n = 1 to 3 does not proceed via ring contraction as shown earlier with n = 0. The fragmentation can be formulated with the concept of neighbouring group participation of the amide function which leads to a cyclic transition state. Investigations with a ²H-labelled compound in the case of n = 1 as well as energy measurements (AP, IP, E_k) agree with this assumption.     

Die photometrische Bestimmung des Wismuts mit Thioharnstoff

Zusammenfassung Es wird gezeigt, daß die Bestimmung des Wismuts mit Thioharnstoff in bromwasserstoffsaurer Lösung auf photometrischem Wege mit dem Gerät ELKO II durchgeführt werden kann. Hierbei benutzt man zweckmäßig das Gerät mit der Glühlampe und Filter S 47 E oder den Quecksilberbrenner in Verbindung mit Filter Hg 436. Damit die Extinktion des gelbgefärbten Komplexes von der Thioharnstoffkonzentration unabhängig wird, muß die Lösung bei Benutzung des Filters S 45 E mindestens 10% Thiohamstoff, bei Benutzung des Filters Hg 436 mindestens 5% Thioharnstoff enthalten. Auch die Bromwasserstoffsäure übt einen Einfluß auf die Ausbildung der Extinktion aus. Wenn man die Messung mit dem Filter S 45 E durchführt und den Thioharnstoffgehalt mit 12% konstant hält, so darf die Bromwasserstoffkonzentration zwischen 1,2–9,2% betragen, um gleichbleibende Extinktionswerte zu erhalten. Benutzt man das Filter Hg 436 bei der gleichen Thioharnstoffkonzentration, so muß der Bromwasserstoffgehalt zwischen 3,0–7,5% liegen. Die Temperatur übt nur einen geringen Einfluß auf die Ausbildung des ThioharnstoffWismutkomplexes aus. Die Extinktion ist zeitunabhängig. Die Extinktionswerte ändern sich innerhalb 3 Std nach Zusammengeben der Reagenslösungen nicht. Das BEERsche Gesetz ist erfüllt. Das Verfahren besitzt erhebliche praktische Bedeutung, da sich sehr viele Metalllegierungen in denen Wismut zu bestimmen ist, mit Hilfe von Bromwasserstoffsäure und Brom sehr schnell lösen lassen.