N-1 Substituted ethyl 4-pyrazolecarboxylates: Synthesis and spectroscopic investigations

The synthesis of various N-1 substituted ethyl 4-pyrazolecarboxylates via reaction of ethyl 2-formyl-3-oxo-propionate (= ethoxycarbonylmalondialdehyde) with appropriately substituted hydrazines is described. Moreover, detailed nmr-spectroscopic investigations with the title compounds are presented.     

On the bromination of hypericin: The gymnochrome chromophores

Summary Stepwise electrophilic bromination of hypericin in pyridine as the solvent yields regioselectively 2,5-dibromohypericin, 2,5,9-tribromohypericin, and 2,5,9,12-tetrabromohypericin. The compounds were characterized by means of NMR-, UV-Vis-, and fluorescence-spectra, andpK _a andpK* _a measurements. These properties were compared with those of hypericin on the one hand and of the recently isolated gymnochromes on the other hand.

---

Zur Bromierung des Hypericins: Die Gymnochrom-Chromophore

Zusammenfassung Schrittweise elektrophile Bromierung von Hypericin in Pyridin als Lösungsmittel liefert regioselektiv 2,5-Dibromhypericin, 2,5,9-Tribromhypericin und 2,5,9,12-Tetrabromhypericin. Diese Verbindungen wurden durch NMR-, UV-Vis- und Fluoreszenz-Spektrometrie sowie durchpK _a - undpk* _a -Messungen charakterisiert. Diese Eigenschaften wurden mit jenen des Hypericins und der kürzlich isolierten Gymnochrome verglichen.

     

Monolithic poly(glycidyl methacrylate-co-divinylbenzene) capillary columns functionalized to strong anion exchangers for nucleotide and oligonucleotide separation

In the present work, poly(glycidyl methacrylate-co-divinylbenzene) monoliths were synthesized and further derivatized to obtain strong anion exchange supports. Capillary monoliths (65 x 0.2 mm id) were prepared in situ by copolymerization of glycidyl methacrylate and divinylbenzene, employing 1-decanol and tetrahydrofuran as porogens. The free epoxy groups were derivatized in a two step synthesis to obtain quaternary ammonium functionalities. On testing the pressure stability of the synthesized monolith, a highly linear dependence between flow rate and pressure drop was obtained, indicating the high stability of the material even at high flow rates. The morphology of the copolymer was investigated by scanning electron microscopy. Mercury intrusion porosimetry showed a narrow pore size distribution, having a maximum at 439 nm. On recording a van Deemter plot the number of theoretical plates per meter was found to be 59324. The produced strong anion exchange monoliths turned out to be highly suitable for the separation of nucleotides and oligonucleotides.     

Protein-cofactor interactions in bacterial reaction centers from Rhodobacter sphaeroides R-26: effect of hydrogen bonding on the electronic and geometric structure of the primary quinone. A density functional theory study

The effect of hydrogen bonding to the primary quinone (Q(A) and Q(*)(-)(A)) in bacterial reaction centers was studied using density functional theory (DFT) calculations. The charge neutral state Q(A) was investigated by optimizing the hydrogen atom positions of model systems extracted from 15 different X-ray structures. From this analysis, mean values of the H-bond lengths and directions were derived. It was found that the N(delta)-H of His M219 forms a shorter H-bond to Q(A) than the N-H of Ala M260. The H-bond of His M219 is linear and more twisted out of the quinone plane. The radical anion Q(*)(-)(A) in the protein environment was investigated by using a mixed quantum mechanics/molecular mechanics (QM/MM) approach. Two geometry optimizations with a different number of flexible atoms were performed. H-bond lengths were obtained and spectroscopic parameters calculated, i.e. the hyperfine and nuclear quadrupole couplings of magnetic nuclei coupled to the radical. Good agreement was found with the results provided by EPR/ENDOR spectroscopy. This implies that the calculated lengths and directions of the H-bonds to Q(*)(-)(A) are reliable values. From a comparison of the neutral and reduced state of Q(A) it was concluded that the H-bond distances are shortened by approximately 0.17 Angstroms (His M219) and approximately 0.13 Angstroms (Ala M260) upon single reduction of the quinone. It is shown that the point-dipole approximation can not be used for an estimation of H-bond lengths from measured hyperfine couplings in a system with out-of-plane H-bonding. In contrast, the evaluation of the nuclear quadrupole couplings of (2)H nuclei substituted in the hydrogen bonds yields H-bond lengths close to the values that were deduced from DFT geometry optimizations. The significance of hydrogen bonding to the quinone cofactors in biological systems is discussed.     

Synthesis and Crystal Structure of Lithium Tetrametaphosphimate Tetrahydrate Li4(PO2NH)4 · 4 H2O

Single crystals of Li₄(PO₂NH)₄ · 4 H₂O were obtained by dissolving LiOH and H₄(PO₂NH)₄ · 2 H₂O in water and subsequent precipitation with acetone and ethanol followed by slow evaporation of the solvents. The structure of Li₄(PO₂NH)₄ · 4 H₂O was solved by single‐crystal X‐ray methods ( (No. 2), a = 489.2(2), b = 853.2(2), c = 880.5(2) pm, α = 101.71(3), β = 102.39(3), γ = 94.88(3)°, Z = 1). The structure is composed of LiO₄ tetrahedra and (PO₂NH)₄^4? ions. The P₄N₄ rings of the anions exhibit a slightly distorted chair–1 conformation, which is supported by IR data and has been described by torsion angles, displacement asymmetry parameters and puckering parameters. Via Li⁺ ions and hydrogen bonds, the tetrametaphosphimate anions are connected forming a three‐dimensional network.     

Synthese,Kristallstruktur und festkörper‐NMR‐spektroskopische Untersuchung neuer Oxonitridosilicate der Mischkristallreihe Ba4−xCaxSi6N10O

The new oxonitridosilicates Ba_4?xCa_xSi₆N₁₀O have been synthesized by means of high‐temperature synthesis in a radio‐frequency furnace, starting from calcium, barium, silicon diimide and amorphous silicon dioxide. The maximum reaction temperature was at about 1450 °C. The solid solution series Ba_4?xCa_xSi₆N₁₀O with a phase width 1.81 ≤ x ≤ 2.95 was obtained. The crystal structure of Ba_1.8Ca_2.2Si₆N₁₀O was determined by X‐ray single‐crystal structure determination (P2₁3, no. 198), a = 1040.2(1) pm, Z = 4, wR2 = 0.082). It can be described as a highly condensed network of corner‐sharing SiN₄ and SiON₃ tetrahedra, the voids of which are occupied by the alkaline earth ions. The structure is isotypic with that of BaEu(Ba_0.5Eu_0.5)YbSi₆N₁₁. In the ²⁹Si solid‐state MAS‐NMR spectrum two isotropic resonances at ?50.0 and ?53.6 ppm were observed.     

Cyanidverbrückte Koordinationspolymere aus cis‐ oder trans‐[Ru(tBuNC)4(CN)2] und MnCl2: Zum Einfluß unterschiedlicher Topologien auf die magnetischen Eigenschaften von Materialien

Cyanide Bridged Coordination Polymers from cis‐ or trans‐[Ru(^tBuNC)₄(CN)₂] and MnCl₂: About the Influence of Different Topologies on the Magnetic Properties of Materials The reaction of cis‐ or trans‐[Ru(^tBuNC)₄(CN)₂] with MnCl₂ as an additional transition metal fragment yields the one dimensional coordination polymers {cis‐[Ru(CN)₂(^tBuNC)₄] MnCl₂}_n, ( 1 ), and {trans‐[Ru(CN)₂(^tBuNC)₄]MnCl₂}_n, ( 2 ), with a different arrangement of the metal centers caused by the different stereochemistry of the starting compounds. The variation of the Ru‐C‐N‐Mn geometry nevertheless leads to significant differences in the magnetic properties of 1 and 2 . The coordination polymer derived from trans‐[Ru(^tBuNC)₄(CN)₂] shows a more efficient antiferromagnetic intrachain interaction between the manganese centers compared to the cis‐derivative.     

Concerning the Reaction of the Betain‐Like Compound O2CC(PPh3)2 with Tungsten‐Carbonyl Derivatives; Preparation and Crystal Structures of [(CO)5W{η1‐O2C2(PPh3)2}] and [(CO)4W{η2‐O2C2(PPh3)2}]

The carbodiphosphorane CO₂ adduct O₂CC(PPh₃)₂ ( 1a ) reacts with [(CO)₅W(THF)] and [(CO)₃W(NCEt)₃] to produce the complexes [(CO)₅W{η¹‐O₂CC(PPh₃)₂}] ( 2 ) and [(CO)₄W{η²‐O₂CC(PPh₃)₂}] ( 3 ), respectively. Whereas in 2 the betain‐like ligand is coordinated at the tungsten atom in a monodentate manner, in 3 it acts as a chelating ligand with formation of a WO₂C four‐membered ring. As a by‐product during the reaction with the acetonitrile adduct also some crystals of the hydrolysis product [HC(PPh₃)₂]₂[W₆O₁₉] · 3C₂H₄Cl₂ (4 · 3C₂H₄Cl₂) were isolated. All compounds could be characterized by X‐ray analyses and the usual spectroscopic methods.     

Synthesis,Crystal Structure and Thermal Behavior of Gadolinium Dicyanamide Dihydrate Gd[N(CN)2]3 · 2 H2O

Gadolinium dicyanamide dihydrate Gd[N(CN)₂]₃ · 2 H₂O was prepared by ion exchange in aqueous solution followed by evaporation of the solvent at room temperature. Gd[N(CN)₂]₃ · 2 H₂O was characterized by single‐crystal structure analysis, FTIR spectroscopy and DSC analysis. In the crystal there are three crystallographically independent [N(CN)₂]^? ions and Gd³⁺ which are coordinated by six N atoms from six different [N(CN)₂]^? ions and two O atoms from two water molecules forming an irregular quadratic antiprism. Four H bonds have been identified in the structure of Gd[N(CN)₂]₃ · 2 H₂O, two of them running to terminal N atoms and two to the bridging N atoms of dicyanamide ions (Gd[N(CN)₂]₃ · 2 H₂O: P2₁/n (no. 14), a = 7.4845(15) Å, b = 11.529(2) Å, c = 13.941(3) Å, β = 93.98(3)°, Z = 4, 1948 reflections, 175 parameters, R1 = 0.0493). The DSC analysis indicates that Gd[N(CN)₂]₃ · 2 H₂O looses the crystal water at temperatures around 130 – 140 °C forming anhydrous Gd[N(CN)₂]₃, the structure of which has been refined by the Rietveld method based on X‐ray powder diffraction data. Gd[N(CN)₂]₃ was found to be isotypic with Ln[N(CN)₂]₃ (Ln = La, Ce, Pr, Nd, Sm and Eu) which previously have been described in the literature.     

Photophysics of intramolecularly hydrogen-bonded aromatic systems: ab initio exploration of the excited-state deactivation mechanisms of salicylic acid

Excited state reaction paths and the corresponding energy profiles of salicylic acid have been determined with the CC2 method, which is a simplified version of singles-and-doubles coupled cluster theory. At crucial points of the potential energy hypersurfaces, single-point energy calculations have been performed with the CASPT2 method (second-order perturbation theory based on the complete active space self-consistent field reference). Hydrogen transfer along the intramolecular hydrogen bond as well as torsion and pyramidization of the carboxy group have been identified as the most relevant photochemical reaction coordinates. The keto-type planar S(1) state reached by barrierless intramolecular hydrogen transfer represents a local minimum of the S(1) energy surface, which is separated by a very low barrier from a reaction path leading to a low-lying S(1)-S(0) conical intersection via torsion and pyramidization of the carboxy group. The S(1)-S(0) conical intersection, which occurs for perpendicular geometry of the carboxy group, is a pure biradical. From the conical intersection, a barrierless reaction path steers the system back to the two known minima of the S(0) potential energy surface (rotamer I, rotamer II). A novel structure, 7-oxa-bicyclo[4.2.0]octa-1(6),2,4-triene-8,8-diol, has been identified as a possible transient intermediate in the photophysics of salicylic acid.