Operational variables in high-performance liquid chromatography-electrospray ionization mass spectrometry of peptides and proteins using poly(styrene-divinylbenzene) monoliths

Capillary reversed-phase high-performance liquid chromatography (RP-HPLC) utilizing monolithic poly(styrene-divinylbenzene) columns was optimized for the coupling to electrospray ionization mass spectrometry (ESI-MS) by the application of various temperatures and mobile phase additives during peptide and protein analysis. Peak widths at half height improved significantly upon increasing the temperature and ranged from 2.0 to 5.4 s for peptide and protein separations at 70 degrees. Selectivity of peptide elution was significantly modulated by temperature, whereas the effect on proteins was only minor. A comparison of 0.10% formic acid (FA), 0.050% trifluoroacetic acid (TFA), and 0.050% heptafluorobutyric acid (HFBA) as mobile phase additives revealed that highest chromatographic efficiency but poorest mass spectrometric detectabilities were achieved with HFBA. Clusters of HFBA, water, and acetonitrile were observed in the mass spectra at m/z values >500. Although the signal-to-noise ratios for the individual peptides diverged considerably both in the selected ion chromatograms and extracted mass spectra, the average mass spectrometric detectabilities varied only by a factor of less than 1.7 measured with the different additives. Limits of detection for peptides with 500 nl sample volumes injected onto a 60 mm x 0.20 mm monolithic column were in the 0.2-13 fmol range. In the analysis of hydrophobic membrane proteins, HFBA enabled highest separation selectivity at the cost of lower mass spectral quality. The use of 0.050% TFA as mobile phase additive turned out to be the best compromise between chromatographic and mass spectrometric performance in the analysis of peptides and proteins by RP-HPLC-ESI-MS using monolithic separation columns.     

Cation-induced collapse of low-molecular-weight polyacrylic acid in the dispersion of barium titanate

Observations on the steric layers formed by the adsorption of low-molecular-weight polyacrylic acid (PAA) were taken using the colloidal probe method in an atomic force microscope. The effects of divalent barium ions and of monovalent potassium ions at varying concentrations were observed on the repulsive interaction profiles. High ionic concentrations screened double-layer forces to small distances, whereby the acting forces were reduced to steric interactions. De Gennes scaling theory was used to model the effect of electrolyte on an aqueous barium titanate system, which was stabilized with PAA. The brush model was found to represent the force curves better than the mushroom model. The collapse of PAA layers with increasing salt approximated a grafted polymer brush in monovalent electrolyte, but the addition of barium ions caused markedly less steric collapse. It is suggested that the formation of a Ba(2+)-PAA complex in the adsorbed layer increases its compressibility parameter.     

Gold catalysis contra platinum catalysis in hydroarylation contra phenol synthesis

Three silylated γ-alkynylfurans were prepared and subjected to both gold and platinum catalysts. The TMS- and the TBDMS-substituted furans reacted. With AuCl₃ and the binuclear [(Ph₃PAu)₂Cl][BF₄] catalyst a hydroarylation of the alkyne was observed. Na[AuCl₄] gave phenols as the product, but these were formed only after in situ desilylation of the starting material by the gold catalyst and thus the wrong isomer dominated. Only with PtCl₂(MeCN)₂ phenols with a silyl group were formed. The TBDPS-substituted furan failed to react. Two alkynylsilanes were synthesized, but they also failed to react.     

1,2,3,4-tetrachloro-9,10-dewar-anthracene

The title compound $\text{5}$ has been synthesized and its aromatisation to the Kekulé isomer $\text{7}$ has been measured. From the kinetic data a diradical process is deduced.     

Biocatalytic asymmetric hydrogen transfer employing Rhodococcus ruber DSM 44541

Nonracemic sec-alcohols of opposite absolute configuration were obtained either by asymmetric reduction of the corresponding ketone using 2-propanol as hydrogen donor or by enantioselective oxidation through kinetic resolution of the rac-alcohol using acetone as hydrogen acceptor employing whole lyophilized cells of Rhodococcus ruber DSM 44541. The microbial oxidation/reduction system exhibits not only excellent stereo- and enantioselectivity but also a broad substrate spectrum. Due to the exceptional tolerance of the biocatalyst toward elevated concentrations of organic materials (solvents, substrates and cosubstrates), the process is highly efficient. The simple preparation of the biocatalyst and its ease of handling turns this system into a versatile tool for organic synthesis.     

Nucleosides. Part LXI. A Simple Procedure for the Monomethylation of Protected and Unprotected Ribonucleosides in the 2′-O- and 3′-O-Position Using Diazomethane and the Catalyst Stannous Chloride

Intensive studies on the diazomethane methylation of the common ribonucleosides uridine, cytidine, adenosine, and guanosine and its derivatives were performed to obtain preferentially the 2′-O-methyl isomers. Methylation of 5′-O-(monomethoxytrityl)-N²-(4-nitrophenyl)ethoxycarbonyl-O⁶-[2-(4-nitrophenyl)ethyl]-guanosine ( 1 ) with diazomethane resulted in an almost quantitative yield of the 2′- and 3′-O-methyl isomers which could be separated by simple silica-gel flash chromatography (Scheme 1). Adenosine, cytidine, and uridine were methylated with diazomethane with and without protection of the 5′ -O-position by a mono- or dimethoxytrityl group and the aglycone moiety of adenosine and cytidine by the 2-(4-nitrophenyl)ethoxycarbonyl (npeoc) group (Schemes 2–4). Attempts to increase the formation of the 2′-O-methyl isomer as much as possible were based upon various solvents, temperatures, catalysts, and concentration of the catalysts during the methylation reaction.     

Time-resolved investigations of singlet oxygen luminescence in water, in phosphatidylcholine, and in aqueous suspensions of phosphatidylcholine or HT29 cells

Singlet oxygen was generated by energy transfer from the photoexcited sensitizer, Photofrin or 9-acetoxy-2,7,12,17-tetrakis-(beta-methoxyethyl)-porphycene (ATMPn), to molecular oxygen. Singlet oxygen was detected time-resolved by its luminescence at 1270 nm in an environment of increasing complexity, water (H2O), pure phosphatidylcholine, phosphatidylcholine in water (lipid suspensions), and aqueous suspensions of living cells. In the case of the lipid suspensions, the sensitizers accumulated in the lipids, whereas the localizations in the cells are the membranes containing phosphatidylcholine. By use of Photofrin, the measured luminescence decay times of singlet oxygen were 3.5 +/- 0.5 micros in water, 14 +/- 2 micros in lipid, 9 +/- 2 micros in aqueous suspensions of lipid droplets, and 10 +/- 3 micros in aqueous suspensions of human colonic cancer cells (HT29). The decay time in cell suspensions was much longer than in water and was comparable to the value in suspensions of phosphatidylcholine. That luminescence signal might be attributed to singlet oxygen decaying in the lipid areas of cellular membranes. The measured luminescence decay times of singlet oxygen excited by ATMPn in pure lipid and lipid suspensions were the same within the experimental error as for Photofrin. In contrast to experiments with Photofrin, the decay time in aqueous suspension of HT29 cells was 6 +/- 2 micros when using ATMPn.     

Organometallic Aspects of the Fischer-Tropsch Synthesis

The Fischer-Tropsch Synthesis counts among the industrial-scale processes having a versatile and broad product range, and has for decades offered the most attractive possibility for the use of coal as a source of heating oil and fuels. This conceivably simple reaction, the catalytic hydrogenation of carbon monoxide, generally leads to simple hydrocarbons as well (i.e. short chain olefins) that have been sought as chemical feedstocks since the oil crisis of the seventies, but fails to provide the large-scale, economic process required, due in large part to the minimal selectivity of traditional Fischer-Tropsch processes. In an effort to solve this problem current research in this sector is concerned not only with the optimization of old and the development of new catalytic systems, but also increasingly with the elucidation of numerous relevant reaction mechanisms. This article will discuss, from the viewpoint of an organometallic chemist, the significance of typical model reactions, both with regard to some fundamental aspects of synthesis gas chemistry, and in comparison with previous views concerning the mechanism of the Fischer-Tropsch Synthesis. The importance of various unique classes of complexes that have been studied in the context of Fischer-Tropsch chemistry is also evaluated with regard to their importance in the synthesis of hydrocarbons from carbon monoxide and hydrogen. It emerges that the primary steps of the reductive oligomerization of carbon monoxide are best described by the carbide/methylene mechanism, as originally proposed by Hans Fischer and Franz Tropsch.     

Nicolaus Cusanus und implizite Funktionen

Mathematische Semesterberichte - Nicolaus Cusanus’ Beiträge zur Mathematik des 15. Jahrhunderts betreffen hauptsächlich Kreisquadraturen. Wir besprechen seinen...     

Correction to: Preface

Foundations of Computational Mathematics -