Beitrag zur direkten Sauerstoffbestimmung in organischen Verbindungen

Zusammenfassung Es wird über zehnjährige Erfahrungen mit der maßanalytischen Mikrobestimmung des Sauerstoffes nachUnterzaucher berichtet. Silikon-schlauchverbindungen dürfen nicht verwendet werden, da sie gasdurchlässig sind. Die Gesamtanalysenzeit kann durch Verwendung eines Klappbrenners auf 15 Minuten verkürzt werden. Die Möglichkeit, das vonEmich im Prinzip vorgeschlagene CO₂-Multiplikationsverfahren anzuwenden, wurde überprüft. Zur Endbestimmung wird für Routine-analysen dem jodometrischen Verfahren wegen seiner Schnelligkeit und Empfindlichkeit der Vorzug gegeben.

---

Summary A report is given of 10 years of experiences with the volumetric micro determination of oxygen by theUnterzaucher procedure. Silicone tube connections must not be used since they are permeable to gases. The total analysis time can be shortened to 15 minutes by using a shutter burner. A study was made of the possibility of using the multiplication procedure that in principle was recommended byEmich. For routine analyses, it was found preferable to employ the iodometric method for the final measurement because of its rapidity and sensitivity.

---

Résumé On donne un compte rendu sur des expériences effectuées depuis une dizaine d'années sur le microdosage volumétrique de l'oxygène d'aprèsUnterzaucher. Il ne faut pas employer pour ces expériences de tubes siliconés car ils sont perméables aux gaz. La durée totale d'une analyse peut être ramenée à 15 minutes en employant un brûleur à charnière. On a examiné la possibilité d'appliquer le procédé de multiplication de CO₂ préconisé dans le principe parEmich. Pour la détermination du point équivalent dans les analyses en série, on donne la préférence au procédé iodométrique en raison de sa rapidité et de sa sensibilité.

     

Synthese von selektiv N- funktionalisierten Polyamin-Derivaten

Synthesis of Selectively N-Functionalized Polyamine Derivatives A threefold differently protected derivative 8 of the triamine spermidine ( 2 ) has been prepared in three steps starting from propane-1,3-diamine ( 1 ). The protected spermidine derivative 8 was converted to its spermine analogue 12 , a useful polyamine intermediate. In a convergent way, the fourfold differently protected derivative 18 of the tetraamine spermine ( 3 ) has been obtained by coupling the two different and separately prepared propane-1,3-diamine units 15 and 17 . Spermidine derivative 19 and spermine derivative 20 , both selectively protected at both primary amino groups, have been Prepared from the free polyamines 2 and 3 , respectively, in a direct approach.     

Directed assembly of Au nanoparticles onto planar surfaces via multiple hydrogen bonds

We have developed a new concept to effect nanoparticle binding on surfaces by use of directed, specific molecular interactions. Hamilton-type receptors displaying a binding strength of approximately 10(5) M(-)(1) were covalently fixed onto self-assembled monolayers via Sharpless-type "click" reactions, thus representing an efficient method to control the densities of ligands over a range from low to complete surface coverage. Au nanoparticles covered with the matching barbituric acid receptors bound with high selectivity onto this surface by a self-assembly process mediated by multiple hydrogen bonds. The binding process was investigated with atomic force microscopy. Moderate control of particle density was achieved by controlling the receptor density on the self-assembled monolayer surface. The method opens a general approach to nanoparticle and small object binding onto patterned surfaces.     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

N‐Silylaminotitanium Chlorides — Synthesis,Structures, Multinuclear Magnetic Resonance,and some Applications

N‐Silylaminotitanium trichlorides, Me₃S(R)N‐TiCl₃ ( 18 ) [R = ^tBu ( a ), SiMe₃ ( b ), 9‐borabicyclo[3.3.1]nonyl (9‐BBN)( c )], and (CH₂SiMe₂)₂N‐TiCl₃ ( 18d ) were obtained in high yield and high purity from the reaction of the respective bis(silylamino)plumbylene with an excess of titanium tetrachloride. The crystal structure of 18a was determined by X‐ray analysis. The reactions of the analogous stannylenes with an excess of TiCl₄ did not lead to 18 . N‐Lithio‐trimethylsilyl[9‐(9‐borabicyclo[3.3.1]nonyl)]amine ( 8 ) was prepared, structurally characterized and used for the synthesis of a new bis(amino)stannylene 10 and a plumbylene 11 . The compounds 18a—d served as ideal starting materials for the synthesis of bis(silylamino)titanium dichlorides, where the silylamino groups can be identical ( 19 ) or different ( 20 ). This was achieved either by the reaction of 18 again with bis(amino)plumbylenes or with lithium N‐silylamides. In contrast to the direct synthesis starting from titanium tetrachloride and two equivalents of the respective lithium amide, which in general affords 19 with identical amino groups only in low yield, the procedure starting from 18 is much more versatile and gave the pure compounds 19 or 20 in almost quantitative yield. Further treatment of the dichlorides 19 or 20 with lithium amides led to tris(amino)titanium chlorides 21 . The dichlorides 19 or 20 reacted with two equivalents of alkynyllithium reagents to give the first well characterized examples of di(alkyn‐1‐yl)bis(N‐silylamino)titanium compounds 22 — 27 . These compounds reacted with trialkylboranes (triethyl or tripropylborane) by 1, 1‐organoboration. In some cases, the extremely reactive reaction products could be identified as novel 1, 1‐bis(silylamino)titana‐2, 4‐cyclopentadienes 28 — 31 bearing a dialkylboryl group in 3‐position. In solution, the proposed structures of all products were deduced from a consistent set of data derived from multinuclear magnetic resonance spectroscopy (¹H, ¹¹B, ¹³C, ¹⁴N, ¹⁵N, ²⁹Si, ³⁵Cl NMR).     

Synthesis of 3-nitro- and 3-aminoquinoline-2,4-diones. An unexpected route to 3-hydroxyquinoline-2,4-diones

Nitration of 3-substituted-4-hydroxy-2(1H)-quinolones 1 with nitric acid leads either to 3-nitro- 2 or 3-hydroxyquinolinediones 3 , depending on the reaction conditions. 3-Substituted-3-hydroxyquinolinediones 3 are also obtained by oxidative hydroxylation with peracetic acid. Amination of 3-substituted-3-chloroquinolinediones 4 with ammonium hydroxide predominantly leads again to 3-substituted-3-hydroxyquinolinediones 3 , only in one case the 3-aminoquinolinedione 5 could be isolated. With morpholine or pyridine as amines the expected 3-aminoquinolinediones 6 and 7 were obtained.     

Nucleotide. X. Synthese und Eigenschaften von Dinucleosidmonophosphaten mit 2′-Desoxyadenosin und 1-(2′-Desoxy-β-D-ribofuranosyl)-lumazinen als Bausteine

Nucleotides. X. Synthesis and properties of dinucleoside monophosphates with 2′-deoxyadenosine and 1-(2′-deoxy-β-D -ribofuranosyl)-lumazines as building blocks The synthesis of various dinucleoside monophosphates 16--20 consisting of 2′-deoxyadenosine and 1-(2′-deoxy-β-D -ribofuranosyl)-lumazines via the triester approach is described. The fully protected phosphotriesters 6--10 as well as the partially deblocked intermediates 11--15 have also been isolated and characterized by physical means. Intramolecular interactions in 16--20 have been investigated by the determination of the hypochromicities and CD. spectra revealing a more or less distinct stacking effect in dependence of the 6,7-substituents in the lumazine moiety as well as the polarity of the internucleotidic linkage. Enzymatic degradations of the dinucleoside monophosphates with snake venom and spleen phosphodiesterase are depending strongly on various structural features indicating a much lower substrate specificity especially in presence of 6,7-diphenyl-lumazine as an aglycone with the latter enzyme.     

Periodic,multiplicative number-theoretical functions

D. Leitmann andD. Wolke [3] proved that multiplicative functions, which are restrictions of continuous, periodic functionsF: with irrational period, are constant equal to 0 or 1. In this note a simpler proof for this result is given.     

Role of structure in amorphous magnetic materials: Dense random packing of hard spheres of two sizes

We investigate the structure of amorphous rare-earth transition-metal alloys and its influence on their magnetic properties in the context of a simple model. The packing fraction of the alloys is discussed using both ball-bearing assemblies and also computer-generated clusters of randomly close-packed hard spheres, and the latter clusters are used to discuss the radial distribution functions (RDF's) and the magnetic anisotropy. The computer-generated RDF's are compared with published neutron diffraction results on amorphous TbFe₂.