Asymmetric diels-alder reactions : facile preparation and structure of sulfonamido-isobornyl acrylates

The crystalline chiral auxiliaries $\text{2}$,$\text{3}$ and $\text{4}$ were prepared from camphor-10-sulfonyl chlorides in 2 steps. Their readily accessible acrylates underwent efficient asymmetric diels-alder additions to cyclopentadiene, the topicity of which agrees with X-ray evidence.     

Comparison of electrospray ionization,atmospheric pressure chemical ionization,and atmospheric pressure photoionization for the analysis of dinitropyrene and aminonitropyrene LC-MS/MS

The only relevant source for human exposure to dinitropyrenes is diesel engine emissions. Due to this specificity, dinitropyrenes may be used as biomarkers for monitoring human exposure to diesel engine emissions. Only few analytical methods have been described for the quantitation of dinitropyrenes and their metabolites, aminonitropyrenes, and diaminopyrenes. Therefore, for dinitropyrenes, aminonitropyrenes, and diaminopyrenes were selected as model compounds for the development of a sensitive HPLC-MS/MS method (high performance liquid chromatography coupled to triple quadrupole mass spectrometry) was to quantify polyaromatic amines and nitroarenes in biological matrices was developed optimal methods by comparing electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI), and atmospheric pressure photoionization (APPI) sources. Dinitropyrene was not effectively ionized and diaminopyrene yielded mainly [M(.)](+) ions by electrospray ionization. With APCI and APPI, precursor ions of diaminopyrene and aminonitropyrene were [M + H](+) and [M(.)](-) for dinitropyrene. Precursor ions with [M - 30(.)](-) for dinitropyrene and [M - 30 + H](+) for aminonitropyrene were observed. Reversed and normal phase HPLC-MS/MS with ESI, APCI and APPI were optimized separately with respect to unequivocal analyte identification and sensitivity. Normal phase HPLC coupled to APPI-MS/MS gave the highest precision and sensitivity for aminonitropyrene (6%/0.2 pg on column) and dinitropyrene (9%/0.5 pg on column). The limit of detection in spiked rat plasma was 5 pg/100 microL for aminonitropyrene (accuracy 82%) and 10 pg/100 microL for dinitropyrene (accuracy 105%). In plasma of rats treated with dinitropyrene by oral administration, no detectable levels of dinitropyrene but higher aminonitropyrene levels compared with intratracheal instillation were observed. These findings clearly demonstrate that dinitropyrene was absorbed after oral and intratracheal application and that a reduction of nitro groups occurs to a high extent in the reductive environment of the intestine. To our knowledge, this is the first time that aminonitropyrene was observed in plasma after intratracheal or oral administration directly demonstrating the reductive metabolism of dinitropyrene in vivo.     

Synthesis and Crystal Structure of Bis(tetraethylammonium) Octabromo‐triselenate(II)‐{dibromodiselenate(I)}, [NEt4]2[Se3Br8(Se2Br2)], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The brown crystals of [NEt₄]₂[Se₃Br₈(Se₂Br₂)] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraethylammonium bromide. The crystal structure of 1 has been determined by the X‐ray methods and refined to R = 0.0308 for 10433 reflections. The crystals are monoclinic, space group P2₁ with Z = 2 and a = 12.0393(3) Å, b = 11.8746(3) Å, c = 13.1946(3) Å, β = 96.561(1)° (123 K). In the solid state structure the anion of 1 is built up of Se₃Br₈ unit which consists of a triangular arrangement of three planar SeBr₄ units sharing a common edge through two μ₃‐bridging Br atoms, and one Se₂Br₂ molecule which is linked to one of μ₃‐bridging Br atoms. The three Se^II atoms form a triangle which is almost perpendicular to the planes given by three SeBr₄ moieties. The contact between the μ₃Br and the Se^I atom of the Se₂Br₂ molecule is 3.1711(8) Å and can be interpreted as a bond of the donor‐acceptor type with the μ₃Br as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II‐Br and μ₃Br‐Se^II bond lengths are in the ranges 2.3537(7)–2.4737(7) Å and 2.7628(7)–3.1701(7) Å, respectively. The bond lengths in coordinated Se₂Br₂ molecule are: Se^I‐Se^I = 2.2636(9) Å, Se^I‐Br = 2.3387(11) and 2.3936(8) Å.     

The crystal structures of two Mercury Perrhenates

The mercury perrhenates with the empirical formulas HgReO₄ and Hg₂ReO₅ were prepared by annealing powdered mixtures of mercury(II)oxide and mercury(II)metaperrhenate Hg(ReO₄)₂ in sealed silica tubes. Their crystal structures were determined from single-crystal X-ray data. HgReO₄ crystallizes dimeric with nearly linear O₃Re? O? Hg? Hg? O? ReO₃ molecular units and Hg₂ReO₅ has a solid state structure, where Hg(I) and Hg(II) together with oxygen atoms form 14-membered rings, which are condensed to two-dimensionally infinite polycationic nets of composition (Hg₂²⁺ · 2 HgO)_n. These nets are separated from each other by tetrahedral ReO₄^? anions.     

Applications of adsorptive stripping voltammetry for the trace analysis of metals, pharmaceuticals and biomolecules

 A review with 159 references is presented on the applications of adsorptive stripping voltammetry (AdSV) for determining trace metal ions in different environmental samples (e.g. water, soil, plant, biological fluids). The analytical applications of AdSV to biologically active organic compounds (e.g. pharmaceuticals, pesticides, biomolecules) are also discussed. Received: 18 December 1995/Revised: 8 January 1997/Accepted: 12 January 1997     

2D-NMR: Part VI. 2D-INADEQUATE spectral analysis and crystal structure of tricyclo[7.3.1.02,7]tridecane

2-Hydroxy-13-oxo-tricyclo[7.3.1.0^2,7]tridecane derivatives can be obtained by reaction of cyclohexanone with alcohols under alkaline conditions. The unambiguous assignment of all signals of the¹H-NMR- and¹³C-NMR-spectrum is possible by 2D-¹H-¹³C-shift correlation and 2D-INADEQUATE. Compound1 crystallizes in space group P2₁/n witha=8.518 (1),b=14.789 (2),c=19.321 (2) Å, =94.91 (1)°,Z=8,D _c =1.22 Mg cm^–3. The structure refined toR=0.100 andR _w =0.097 for 1719 observed reflections. Two independent molecules form centrosymmetric hydrogen-bonded dimers.Part V:Haslinger E.,Kalchhau-ser H.,Robien W.,Steindl H., Monatsh. Chem.115, 597 (1984).     

Low-valent cobalt complexes with three different pi acceptor ligands: experimental and DFT studies of the reduced and the low-lying excited states of (R-DAB)Co(NO)(CO), R-DAB = substituted 1,4-diaza-1,4-butadiene

The complexes (RN=CH-CH=NR)Co(NO)(CO) with R = isopropyl, 2,6-diisopropylphenyl, or p-tolyl are chemically and electrochemically reducible to radical anions at potentials which strongly depend on R. The DFT calculated structure for the neutral compound with R = iPr agrees with the experiment, and the computed structure of the anion radical reveals changes according to a reduction of the R-DAB ligand. EPR results confirm an (R-DAB)-based singly occupied molecular orbital in [(RNCHCHNR)Co(NO)(CO)](.-), with minor but detectable contributions from NO as supported by IR spectroelectrochemistry and as quantified by DFT spin density calculations. The calculations indicate increasingly stabilized CO, NO, and RNCHCHNR pi* acceptor orbitals, in that order. On the basis of TD-DFT (time-dependent density functional theory) calculations, the lowest-lying excited states are assigned to metal-to-(R-DAB) charge transfer transitions while bands due to the metal-to-nitrosyl charge transfer occur at higher energies but still in the visible region. Resonance Raman studies were used to probe these assignments.