Application of Microwave Energy to Cleavage of Sulfur Bonds in the S8Ring in the Simplest Amide Solvents

Microwave energy has been employed for cleavage of sulfur bonds in the S₈ring. Cleavage of S–S bonds was carried out in extraction of elemental sulfur in simple amide solvents. Due to the use of microwave energy and the polarity of amides, up to, 100 times lower concentration of a nucleophilic reducer, such as azide or nitrite, may be used to cleave the sulfur bonds. The time needed for cleavage of sulfur bonds at sulfur concentration higher than 0.1 mg S/100 mg solvent was reduced from hours to minutes. This cleavage was quantitative when carried out in a Teflon container in a microwave oven with continuous or pulsed heating. UV spectra show from which value of absorption there will be a sulfur sol at different sulfur concentrations. This allows us to adjust the microwave exposure power and time to avoid sulfur sol formation and not destroy the sample.     

From the plateau problem to periodic minimal surfaces in lipids,surfactants and diblock copolymers

A novel method is presented for generating periodic surfaces. Such periodic surfaces appear in all systems which are characterized by internal interfaces and which additionally exhibit ordering. One example are systems of AB diblock copolymers, where the internal interfaces are formed by the chemical bonds between the A and B blocks. In these systems at least two bicontinuous phases are formed: the ordered bicontinuous double diamond phase and the gyroid phase. In these phases the ordered domains of A monomers and B monomers are separated by a periodic interface of the same symmetry as the phases themselves. Here we present a novel method for the generation of such periodic surfaces based on the simple Landau-Ginzburg model of microemulsions. We test the method on four known minimal periodic surfaces, find two new surfaces of cubic symmetry, and show how to obtain periodic surfaces of high genus and n-tuply continuous phases (n > 2). So far only bicontinuous (n = 2) phases have been known. We point out that the Landau model used here should be generic for all systems characterized by internal interfaces, including the diblock copolymer systems.     

Stereoselective synthesis of isoindolinones and tert-butyl sulfoxides

A reaction of Grignard reagents with an optically pure N-sulfinylimine derived from methyl 2-formylbenzoate yields enantioenriched isoindolinones and tert-butyl sulfoxides. The products are formed by the addition of the nucleophile to N-sulfinylimine followed by cyclization to form N-tert-butylsulfinylisoindolinone, which readily undergoes substitution with a second equivalent of Grignard reagent. The reaction can be carried out in dichloromethane at room temperature or at elevated temperatures without any loss of stereoselectivity. The use of nucleophiles other than Grignard reagents has also been investigated.     

Amino-Modified Silicate Xerogels Complexed with Cu(II) as Catalyst Precursors. Coordination State and Thermal Decomposition

The sol-gel process is a useful method for preparing two series of organically and co-ordinately modified xerogels of the types [CuN _n ]·N _5–n ·5xSiO_4/2 (n < 4) and [Cu(N–N)_n]·(N–N)_2–n ·2x SiO_4/2(n 2), where N = NH₂(CH₂)₃ SiO_3/2, N–N = NH₂(CH₂)₂NH·(CH₂)₃SiO_3/2 and x = [SiO_4/2]/[N] or [SiO_4/2]/[N–N]. The amino groups in the materials are coordinately active and participate partly in the coordination sphere of Cu(II) ions. The composition of the coordination sphere can be varied with the SiO_4/2 content and also as a result of the thermal decomposition of the organic residues at higher temperatures.Because the xerogel materials are considered to be catalyst precursors, this study is focused on their coordination and thermal properties. The prepared xerogels, such as silica, aminated silicates with N and N–N, as well as those entities complexed with Cu(II), were characterised by FT-IR spectroscopy. During gelation and thermal decomposition the materials were analysed by electron paramagnetic resonance (EPR) spectroscopy. The xerogels were additionally studied by UV-Vis absorption spectroscopy. The gaseous products of the thermal decomposition of these materials in an Ar atmosphere were investigated by the use of FT-IR spectroscopy coupled with TG and DTG thermal analysis. These data were complemented by temperature-programmed decomposition (TPDec) in a 2% O₂ + 98% Ar stream coupled with quadrupole mass spectroscopy.     

The influence of chemical structure on thermal properties and surface morphology of polyurethane materials

The surface morphology and thermal properties of polyurethanes can be correlated to their chemical composition. The hydrophilicity, surface morphology, and thermal properties of polyurethanes (differed in soft segments and in linear/cross-linked structure) were investigated. The influence of poly([R,S]-3-hydroxybutyrate) presence in soft segments and blending of polyurethane with polylactide on surface topography were also estimated. The linear polyurethanes (partially crystalline) had the granular surface, whereas the surface of cross-linked polyurethanes (almost amorphous) was smooth. Round aggregates of polylactide un-uniformly distributed in matrix of polyurethane were clearly visible. It was concluded that some modification of soft segment (by mixing of poly([R,S]-3-hydroxybutyrate) with different polydiols and polytriol) and blending of polyurethanes with small amount of polylactide influence on crystallinity and surface topography of obtained polyurethanes.     

Crystal,electronic structure and hydrogenation properties of the Mg5.57Ni16Ge7.43 cluster phase with a new type of polyhedron

The ternary germanide Mg_5.57Ni₁₆Ge_7.43 (cubic, space group Fmm, cF116) belongs to the structural family based on the Th₆Mn₂₃-type. The Ge1 and Ge2 atoms fully occupy the 4a (mm symmetry) and 24d (m.mm) sites, respectively. The Ni1 and Ni2 atoms both fully occupy two 32f sites (.3m symmetry). The Mg/Ge statistical mixture occupies the 24e site with 4m.m symmetry. The structure of the title compound contains a three-core-shell cluster. At (0,0,0), there is a Ge1 atom which is surrounded by eight Ni atoms at the vertices of a cube and consequently six Mg atoms at the vertices of an octahedron. These surrounded eight Ni and six Mg atoms form a [Ge1Ni₈(Mg/Ge)₆] rhombic dodecahedron with a coordination number of 14. The [GeNi₈(Mg/Ge)₆] rhombic dodecahedron is encapsulated within the [Ni₂₄] rhombicuboctahedron, which is again encapsulated within an [Ni₃₂(Mg/Ge)₂₄] pentacontatetrahedron; thus, the three-core-shell cluster [GeNi₈(Mg/Ge)₆@Ni₂₄@Ni₃₂(Mg/Ge)₂₄] results. The pentacontatetrahedron is a new representative of Pavlyuk's polyhedra group based on pentagonal, tetragonal and trigonal faces. The dominance of the metallic type of bonding between atoms in the Mg_5.57Ni₁₆Ge_7.43 structure is confirmed by the results of the electronic structure calculations. The hydrogen sorption capacity of this intermetallic at 570 K reaches 0.70 wt% H₂.     

Analysis of flammability and smoke emission of rigid polyurethane foams modified with nanoparticles and halogen-free fire retardants

Using one-step method, rigid polyurethane foams were made, modified with developed fire retardant systems containing halogen-free flame retardants and nanofillers in the form of multi-walled carbon nanotubes or nanoscale titanium dioxide. The materials were subjected to a test using a cone calorimeter and smoke-generating chamber, and selected samples were further analyzed via thermogravimetry and oxygen index. Moreover, the products of thermal degradation of selected samples were identified using gas chromatography with mass spectrometer. Conducted flammability tests confirmed the presence of a synergistic effect between the used nanofillers and halogen-free flame retardants. It has been observed that the carbonized layer, the formation of which favored the presence of nanoadditives, inhibits the combustion process. Furthermore, nanofillers influenced favorably reduction in the amount and the number of occurring products of thermal degradation.     

Algebraic models of smooth manifolds

Research supported by the NSF Grant DMS-8602672     

Complex cycles on algebraic models of smooth manifolds

Every compact smooth manifold M is diffeomorphic to the set X(\mathbbR){X(\mathbb{R})} of real points of a nonsingular projective real algebraic variety X, which is called an algebraic model of M. Each algebraic cycle of codimension k on the complex variety X_\mathbbC=X×_\mathbbR\mathbbC{X_{\mathbb{C}}=X\times_{\mathbb{R}}\mathbb{C}} determines a cohomology class in H^2k(X(\mathbbR);\mathbbD){H^{2k}(X(\mathbb{R});\mathbb{D})} , where \mathbbD{\mathbb{D}} denotes \mathbbZ{\mathbb{Z}} or \mathbbQ{\mathbb{Q}} . We investigate the behavior of such cohomology classes as X runs through the class of algebraic models of M.     

A global bifurcation index for set-valued perturbations of Fredholm operators

In the paper the homotopy invariant detecting global bifurcations of solutions to multi-parameter equations involving general set-valued perturbations of linear Fredholm operators of non-negative index is introduced. Some applications to the existence problems for differential inclusions are provided.