Spontaneous Nef reaction of 3-aryl-2-(diethoxyphosphoryl)-4-nitroalkanoic acids

Spontaneous Nef reaction of primary and secondary 3-aryl-2-(diethoxyphosphoryl)-4-nitroalkanoic acids has been observed for the first time. The reaction provides a general and effective, highly diastereoselective synthesis of 3-(diethoxyphosphoryl)-1-hydroxysuccinimides and 2-(diethoxyphosphoryl)-4-oxoalkanoic acids.     

Calculations of substituent and solvent effects on the kinetic isotope effects of Menshutkin reactions

Nitrogen, deuterium, halogen, and carbon kinetic isotope effects have been modeled for the Menshutkin reaction between methyl halides and substituted N,N-dimethylaniline at the HF/6-31G(d) level of theory augmented by the C-PCM continuum solvent model for several solvents. Systematic changes in geometries of the transition states and Gibbs free energies of activation have been found with phenyl ring substituents, solvent, and the leaving group. Kinetic isotope effects also change systematically; however, these changes are predicted to be small, inside the usual precision of the experimental measurements. On the contrary, no correlation has been found between the kinetic isotope effects and the Hammett constants for para substituents. Thus opposite to previous assumptions, our results indicate that kinetic isotope effects on the Menshutkin reaction cannot be used to predict the position of the transition state on the reaction coordinate.     

Ultra trace analysis of refractory metals by solid state mass spectrometry — A comparison of GDMS,SSMS and SIMS

The analytical performance of a glow discharge quadrupole mass spectrometer is demonstrated using sintered tungsten as an example. The inherent problem of molecular interferences in glow discharge mass Spectrometry has been considerably reduced using neon as a complementing discharge gas. Particular attention has been paid to time dependences. Analytical figures of merit are presented.     

Synthetic utility of 3-(perfluoro-1,1-dimethylbutyl)-1-propene. Part IV. Synthesis and properties of 1,1,1,2,2,3,3,8,9,9,9-undecafluoro-4,4,8-tris(trifluoromethyl)nonane - a new potential oxygen carrier for biomedical use

The title compound, CF₃CF₂CF₂(CF₃)₂CCH₂CH₂CH₂CF(CF₃)₂, was synthesised in high yield by a free radical addition of heptafluoroisopropyl iodide to 3-(perfluoro-1, 1-dimethylbutyl)-1- propene followed by reduction of the adduct. Physical properties and solubilities for oxygen, nitrogen, carbon dioxide and air of the new fluorohydrocarbon have been determined.     

Adsorption of water vapour from humid air by selected carbon adsorbents

The water uptake by carbon molecular sieves (CMS) and graphitized carbons, all of which are used to determine volatile organic compounds in air, was investigated using a direct experimental approach. CMS, e.g. Carboxen 1002, Carboxen 1003 and Anasorb CMS adsorb substantial amounts of water, in the range 400 to 450 mg per gram of adsorbent. Graphitized carbons, e.g. Carbrogaph 5TD and Carbopack X show low water trapping, less than 30 mg g(-1) and Carbopack Y as little as 5 mg g(-1) or less. The water sorption capacity for graphitized carbons is strongly dependent on the relative humidity (RH). The change of RH from 95 to 90% decreases the amount of adsorbed water by more than a factor of 2. Two different water adsorption mechanisms are operative: adsorption on polar centers and micropore volume filling. For graphitized carbons and CMS at low RH, adsorption on polar centers is involved. For CMS, once the threshold value of relative humidity (RHth) is surpassed, micropore volume filling becomes predominant. RHth is 44 +/- 3 and 42 +/- 3% for Carboxen 1002 and 1003, respectively, and 32 +/- 3% for Anasorb CMS. The CMS mass in the trap was found not to affect the mass of retained water under condition of incomplete saturation of adsorbent bed with water. Thus, the restrictions commonly imposed on the CMS mass are not necessary. The dry purging technique is suggested to remove adsorbed water. Carbograph 5TD and Carbopack X require only a few hundred ml of dry air to remove adsorbed water entirely. Water can also be purged out from CMS; however, much larger volumes of dry air are needed.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

The use of bathoferroine for extraction-spectrophotometric determinations of microamounts of perchlorate and perrhenate

Bathoferroine can be used for anion determinations by a method based on selective ion-pair extraction if the selectivity of extraction has been enhanced by addition of nonelectrolyte to the water phase. The method of perchlorate and perrhenate determinations characterizes parameters similar to those obtained by methods in which other cation complexes have been used. The advantage of the proposed method is the possibility of considerable concentration of ion association compound extracts by nitromethane reextraction.     

Structural assignment of isomeric 2-(2-quinolinyl)-1H-indene-1,3(2H)-dione mono- and disulfonic acids by liquid chromatography electrospray and atmospheric pressure chemical ionization tandem mass spectrometry

Positionally isomeric 2-(2-quinolinyl)-1H-indene-1,3(2H)-dione mono- and disulfonic acids give rise to similar electrospray ionization (ESI) and atmosphere pressure chemical ionization (APCI) mass spectra, which show very abundant MH(+) ions and negligible fragmentation. The MH(+) ions of these isomeric acids exhibit notably different behavior under collision-induced dissociation (CID) conditions. The acids with a sulfonic group at position 8' in the quinoline moiety, adjacent to the N-atom, exhibit highly abundant [MH - H(2)SO(3)](+) ions (m/z 272 for the mono- and m/z 352 for the disulfonic acids), which are of lower abundance in the CID spectra of isomers with the SO(3)H group at other positions, remote from the nitrogen atom. The latter isomers undergo efficient eliminations of SO(3) and HSO(3). The isomeric diacids with one SO(3)H group at position 4 of the indene-1,3(2H)-dione moiety, adjacent to one of the carbonyl groups, undergo highly efficient elimination of H(2)O. Mechanistic pathways, involving interactions between adjacent groups, are proposed for the above regiospecific fragmentations. Pronounced different behavior has been also observed in negative ion tandem mass spectrometric measurements of the sulfonic acids. The distinctive behavior of the isomeric acids was strongly pronounced when the measurements were performed with an ion trap mass spectrometer (LCQ), and much less so with a triple-stage quadrupole instrument (TSQ).     

Effect of substituents at silicon on the oxidative addition of trisubstituted silanes to [RhCl(cod)PPh3]

Summary Trisubstituted silanes, HSiR_3–n X _n (R = Me, Et, Pr or Bu; X = Cl, OEt or Ph; and n = 0–3) readily undergo oxidative addition to complex [RhCl(cod)PPh₃] (where cod = cycloocta-1,5-diene).The quantitative correlation between rate constants, k ₁, of the reaction, followed spectrophotometrically at 20 °C in benzene solutions, and the structure of tri-substituted silanes represented by stereoelectronic parameters , and E of the substituents, was established: logk ₁ = a + b + c + dE. The reaction rate is accelerated by electron-withdrawing substituents at silicon and retarded by the bulk and pd donation of nonalkyl substituents.Author to whom all correspondence should be directed.     

Brillouin scattering and optical Kerr effect study of dimethacrylates: temperature effects

In this paper we report a temperature study of Brillouin scattering and optical Kerr effect in the ethane-1,2-diol dimethacrylate, pentane-1,5-diol dimethacrylate and hexane-1,6-diol dimethacrylate belonging to the series of dimethacrylate homologues. Using these methods we have studied the temperature behaviour of the hypersonic velocity, adiabatic compressibility and optical Kerr constant in the temperature range from 283 to 323 K.

The obtained results are compared to those obtained earlier from Brillouin scattering and optical Kerr effect experiments for butane-1,4-diol dimethacrylate and 2,2′-thiodiethyl dimethacrylate (a sulfur-containing monomer). The results are also discussed in terms of changes in the intermolecular interactions and arrangement in the liquid compounds under study.