A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Adsorption and desorption of toluene on nanoporous TiO2/SiO2 prepared by atomic layer deposition (ALD): influence of TiO2 thin film thickness and humidity

Adsorption and desorption of toluene on bare and TiO₂-coated silica with a mean pore size of 15 nm under dry and humid conditions were studied using toluene breakthrough curves and temperature programmed desorption (TPD) of toluene and CO₂. Two TiO₂/silica samples (either partially or fully covered with TiO₂) were prepared with 50 and 200 cycles of TiO₂ atomic layer deposition (ALD), respectively. The capacity of silica to adsorb toluene improved significantly with TiO₂-thin film coating under dry conditions. However, toluene desorption from the surface due to displacement by water was more pronounced for TiO₂-coated samples than bare samples under humid conditions. In TPD experiments, silica with a thinner TiO₂ film (50-ALD cycled) had the highest reactivity for toluene oxidation to CO₂ both in the absence and presence of water. Toluene adsorption and oxidation reactivity of silica can be controlled by modifying the silica surface with small amount of TiO₂ using ALD.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Plasmonic Scissors for Molecular Design

Heterogeneous catalysts play an important role in surface catalytic reactions, but selective bond breaking and control of reaction products in catalytic processes remain significant challenges. High‐vacuum tip‐enhanced Raman spectroscopy (HV‐TERS) is one of the best candidates to realize surface catalytic reactions. Herein, HV‐TERS was employed in a new method to control dissociation by using hot electrons, generated from plasmon decay, as plasmonic scissors. In this method, the N?N bond in 4,4′‐dimercaptoazobenzene was selectively dissociated by plasmonic scissors, and the reaction products formed from the radical fragment (SC₆H₅N) were controlled by varying the pH value. Under acidic conditions, p‐aminothiophenol was produced from the radical fragment by attachment of hydrogen ions, whereas under alkaline conditions, 4‐nitrobenzenethiol was obtained by attachment of oxygen ions to the substrate.     

Cellulose polymorphism study with sum-frequency-generation (SFG) vibration spectroscopy: identification of exocyclic CH2OH conformation and chain orientation

Sum-frequency-generation (SFG) vibration spectroscopy is a technique only sensitive to functional groups arranged without centrosymmetry. For crystalline cellulose, SFG can detect the C6H₂ and intra-chain hydrogen-bonded OH groups in the crystal. The geometries of these groups are sensitive to the hydrogen bonding network that stabilizes each cellulose polymorph. Therefore, SFG can distinguish cellulose polymorphs (I_β, II, III_I and III_II) which have different conformations of the exocyclic hydroxymethylene group or directionalities of glucan chains. The C6H₂ asymmetric stretching peaks at 2,944 cm^?1 for cellulose I_β and 2,960 cm^?1 for cellulose II, III_I and III_II corresponds to the trans-gauche (tg) and gauche-trans (gt) conformation, respectively. The SFG intensity of the stretch peak of intra-chain hydrogen-bonded O–H group implies that the chain arrangement in cellulose crystal is parallel in I_β and III_I, and antiparallel in II and III_II.     

Complexation of hydrazine with native cellulose in water and toluene

Adsorption–complexation of cellulose by hydrazine solutions in water and toluene was studied for native cellulose of varied crystallinity. Penetration of hydrazine into cellulose takes place more readily in hydrazine solution of higher concentration and with cellulose of lower crystallinity, but the equilibrium uptake was nearly independent of crystallinity. Complexation from toluene solution takes place at lower hydrazine concentration in toluene than in water, presumably because of the difference in hydrazine–solvent interaction. The adsorption isotherm of hydrazine in water is likely to be sigmoid, implying a cooperative sorption mechanism. It can presumably be ascribed to the disordered structure in the course of complexation.     

Effect of post-synthetic processing conditions on structural variations and applications of bacterial cellulose

Physicochemical properties of materials can be amended by altering their physical structure through different processing conditions. The present study was conducted to investigate the post-synthesis structural variations and physico-mechanical properties of bacterial cellulose (BC) sheets prepared using different drying methods. Wet BC sheets of the same origin were freeze dried (BC-FD), dried at room temperature (25 °C) (BC-DRT), and dried at elevated temperature (50 °C) (BC-DHT). FE-SEM micrographs revealed that BC-DRT and BC-DHT had a more tightly packed and compact structure than the loosely held fibrils of BC-FD. XRD analysis revealed the relative crystallinity of the BC sample to be 64.60, 59.16, and 47.20 % for BC-DHT, BC-DRT and BC-FD, respectively. The water holding capacity (WHC) of the BC-FD was higher than that of the other two samples. Four consecutive drying and rewetting cycles demonstrated that the WHC of all samples decreased with each cycle. The WHC of BC-DRT and BC-DHT was reduced to almost 0 after the first drying cycle, but the BC-FD samples were able to regain some of their WHC. The tensile strength and elongation modulus were in the order of BC-DHT > BC-DRT > BC-FD. Overall, the results of this study revealed that the post-synthetic processing conditions had a strong effect on the structure and physico-mechanical properties of BC.