Completely prime L-filters,irreducible L-filters and sobriety

In this paper, for a frame L, we characterize modified sobriety in stratified L-topological spaces and strong L-topological spaces internally using certain classes of stratified L-filters. While the first characterization using completely prime L-filters is trivial and applies to all stratified L-topological spaces, the other one using irreducible L-filters generalizes an approach of R.E. Ho?mann to the lattice-valued case but is restricted to either the case that the lattice is a complete Boolean algebra or to the case of completely distributive lattices and strong L-topological spaces.     

Investigation of ion-bombarded conducting polymer films by scanning electrochemical microscopy (SECM)

Scanning electrochemical microscopy (SECM) was used to investigate the effect of ion bombardment on thin films of the conducting polymers poly[3-ethoxy-thiophene] (PEOT) and poly[ethylenedioxy-thiophene] (PEDT). Bombardment with Ar⁺-ions converts the topmost 30 nm thick layer to an essentially insulating material. SECM approach curves as well as two dimensional scans prove the existence of regions of different conductivity within the irradiated regions that did not show a significant dependence on ion dosage. PEDT layers patterned by ion bombardment through microscopic masks are investigated as prototypes of miniaturized printed circuit boards that can be formed by galvanic copper deposition onto conducting PEDT. Defects in conducting polymer patterns were analyzed by SECM imaging before any deposition of copper. Appropriate representations of SECM images for the evaluation of this technologically important question are discussed.     

Photoelectrochemical kinetics of eosin y-sensitized zinc oxide films investigated by scanning electrochemical microscopy

Eosin Y is used as a sensitizer for nanoporous zinc oxide films for prospective applications in photoelectrochemical solar cells. The kinetics of the reduction of the intermittently formed photo-oxidized dye molecules by iodide ions in the electrolyte phase was investigated by using the feedback mode of scanning electrochemical microscopy (SECM). The bulk solution phase contained triiodide as electron transfer mediator, from which the ultramicroelectrode-generated iodide ions acted as electron donors for photo-oxidized Eosin Y molecules (D(+) (ads)) at the zinc oxide sample. Effective rate constants for the dye regeneration could be extracted from the SECM approach curves. The effective rate constants at different triiodide concentrations could be related to the rate constant for the reaction of the dissolved donor with photo-oxidized Eosin Y bound to ZnO, as well as to the overall rate of the photosensitization process. For the reaction D(+) (ads) + 1.5 I(-)-->D(ads) + 0.5 I(3) (-) a rate constant of k(ox) = (1.4+/-0.8)x10(8) cm(9/2) mol(-3/2) s(-1) was determined.     

SIMS accurate determination of matrix composition of topological crystalline insulator material Pb1 − xSnxSe

Substitutional alloy Pb_1 − xSn_xSe is a new class of electronic materials called topological crystalline insulators, which at the temperature range from 0 K to 300 K exhibit topological state at compositions in the range 0.18 < x < 0.40 (in the rock-salt structure). In this report, we present a secondary ion mass spectrometry (SIMS) analysis technique to provide accurate Pb and Sn composition based on the measurement of PbCs⁺ and SnCs⁺ cluster ions intensities. Studies of Pb_1 − xSn_xSe bulk samples with various values of x show that x/(1 − x) is linear in relation to the intensity ratio of PbCs⁺/SnCs⁺ over the range from x = 0.15 to x = 0.41. This technique allows us to obtain an accurate Sn content for multilayered heterostructures, quantum wells containing Pb_1 − xSn_xSe with different x values for each layer.     

Application of thin titanium/titanium oxide layers deposited on gold for infrared reflection absorption spectroscopy: structural studies of lipid bilayers

Ultrathin titanium layers when deposited on the surface of gold can be successfully applied for infrared reflection absorption spectroscopy (IRRAS) investigations. It was shown that the reflectivity, the phase shift, and the mean square electric field of the p- and s-polarized IR radiation in up to 20 nm thick titanium layers covered with a 3-4 nm thick layer of native oxide are comparable to those of the air/gold interface. The surface selection rule is fulfilled. Thus, qualitative and quantitative analysis of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayers transferred in liquid expanded (LE) and liquid condensed (LC) states can be performed. Differences are found in the hydration state and molecular arrangement of the two investigated bilayers. In the DMPC bilayer in the LE state, the C-N bond in the positively charged choline moiety is inclined by approximately 70 degrees toward the surface of the negatively charged titanium substrate. In the phosphate moiety, the in-plane vector of the O-P-O group makes a small angle of approximately 15 degrees to the surface normal. This open structure of the lipid molecule corresponds to the B crystal structure of the DMPC molecule and provides space for strong hydration of the polar headgroup. In the DMPC bilayer in the LC state, the intermolecular distances are reduced; the C-N bond of the choline group makes a smaller angle to the surface normal, and the in-plane vector of the O-P-O group in the phosphate moiety displays a larger tilt. The degree of hydration is reduced. The arrangement of the polar headgroup region corresponds to the A crystal structure of the DMPC molecule.     

Octopolar chromophores based on donor- and acceptor-substituted 1,3,5-tris(phenylethynyl)benzenes: impact of meta-conjugation on the molecular and electronic structure by means of spectroscopy and theory

The molecular and electronic structures of a series of all-meta-substituted phenylacetylene mesitylenes peripherally substituted with donor or acceptor (D-A) groups are studied. The impact of meta- and para-substitution patterns is also analyzed by employing Raman and optical spectroscopies in conjunction with theoretical calculations. Outer phenyl rings display a partial quinoid character induced by two different motifs: (i) outer phenyls --> triple bond charge transfer for the cases where these phenyls are substituted with electron-donors; (ii) double electron withdrawing effect in the molecules with the peripheral phenyls substituted with electron acceptors. A moderate tuning of the optical gap is observed in agreement with the partial blockade of pi-electron conjugation exerted by the meta disposition. The orbital structure of the compounds partially preserves that of the mesitylene group showing extra-conjugation due to the addition of the arms, so that conjugation is not entirely obstructed but partially impeded in the ground electronic state (i.e., electron occupied orbitals). As for the excited states, the low-lying energy empty orbitals offer better conditions for full conjugation over the whole molecular scaffold. Interesting optical properties such as overlapping centers along the lowest energy optical excitations and enhanced optical transparency with importance for the application of these materials in optoelectronics have been justified on the basis of the electronic structure. A greater degree of quinoidization, and more allowed pi-electron delocalization, over the entire molecule is recognized in the case of linear phenylacetylenes substituting in para positions the central core.     

Localized electropolymerization on oxidized boron-doped diamond electrodes modified with pyrrolyl units

This paper describes the functionalization of oxidized boron-doped diamond (BDD) electrodes with N-(3-trimethoxysilylpropyl)pyrrole (TMPP) and the influence of this layer on the electrochemical transfer kinetics as well as on the possibility of forming strongly adhesive polypyrrole films on the BDD interface through electropolymerization. Furthermore, localized polymer formation was achieved on the TMPP-modified BDD interface using the direct mode of a scanning electrochemical microscope (SECM) as well as an electrochemical scanning near-field optical microscope (E-SNOM). Depending on the method used polypyrrole dots with diameters in the range of 1-250 microm are electrogenerated.     

Chiral Fluorinated α‐Sulfonyl Carbanions: Enantioselective Synthesis and Electrophilic Capture,Racemization Dynamics,and Structure

Enantiomerically pure triflones R¹CH(R²)SO₂CF₃ have been synthesized starting from the corresponding chiral alcohols via thiols and trifluoromethylsulfanes. Key steps of the syntheses of the sulfanes are the photochemical trifluoromethylation of the thiols with CF₃Hal (Hal=halide) or substitution of alkoxyphosphinediamines with CF₃SSCF₃. The deprotonation of RCH(Me)SO₂CF₃ (R=CH₂Ph, iHex) with nBuLi with the formation of salts [RC(Me)? SO₂CF₃]Li and their electrophilic capture both occurred with high enantioselectivities. Displacement of the SO₂CF₃ group of (S)‐MeOCH₂C(Me)(CH₂Ph)SO₂CF₃ (95 % ee) by an ethyl group through the reaction with AlEt₃ gave alkane MeOCH₂C(Me)(CH₂Ph)Et of 96 % ee. Racemization of salts [R¹C(R²)SO₂CF₃]Li follows first‐order kinetics and is mainly an enthalpic process with small negative activation entropy as revealed by polarimetry and dynamic NMR (DNMR) spectroscopy. This is in accordance with a C_α? S bond rotation as the rate‐determining step. Lithium α‐(S)‐trifluoromethyl‐ and α‐(S)‐nonafluorobutylsulfonyl carbanion salts have a much higher racemization barrier than the corresponding α‐(S)‐tert‐butylsulfonyl carbanion salts. Whereas [PhCH₂C(Me)SO₂tBu]Li/DMPU (DMPU = dimethylpropylurea) has a half‐life of racemization at ?105 °C of 2.4 h, that of [PhCH₂C(Me)SO₂CF₃]Li at ?78 °C is 30 d. DNMR spectroscopy of amides (PhCH₂)₂NSO₂CF₃ and (PhCH₂)N(Ph)SO₂CF₃ gave N? S rotational barriers that seem to be distinctly higher than those of nonfluorinated sulfonamides. NMR spectroscopy of [PhCH₂C(Ph)SO₂R]M (M=Li, K, NBu₄; R=CF₃, tBu) shows for both salts a confinement of the negative charge mainly to the C_α atom and a significant benzylic stabilization that is weaker in the trifluoromethylsulfonyl carbanion. According to crystal structure analyses, the carbanions of salts {[PhCH₂C(Ph)SO₂CF₃]Li? L }₂ ( L =2 THF, tetramethylethylenediamine (TMEDA)) and [PhCH₂C(Ph)SO₂CF₃]NBu₄ have the typical chiral C_α? S conformation of α‐sulfonyl carbanions, planar C_α atoms, and short C_α? S bonds. Ab initio calculations of [MeC(Ph)SO₂tBu]^? and [MeC(Ph)SO₂CF₃]^? showed for the fluorinated carbanion stronger n_C→σ* and n_O→σ* interactions and a weaker benzylic stabilization. According to natural bond orbital (NBO) calculations of [R¹C(R²)SO₂R]^? (R=tBu, CF₃) the n_C→σ*_{S? R} interaction is much stronger for R=CF₃. Ab initio calculations gave for [MeC(Ph)SO₂tBu]Li ? 2 Me₂O an O,Li,C_α contact ion pair (CIP) and for [MeC(Ph)SO₂CF₃]Li ? 2 Me₂O an O,Li,O CIP. According to cryoscopy, [PhCH₂C(Ph)SO₂CF₃]Li, [iHexC(Me)SO₂CF₃]Li, and [PhCH₂C(Ph)SO₂CF₃]NBu₄ predominantly form monomers in tetrahydrofuran (THF) at ?108 °C. The NMR spectroscopic data of salts [R¹(R²)SO₂R³]Li (R³=tBu, CF₃) indicate that the dominating monomeric CIPs are devoid of C_α? Li bonds.     

Control over binding stoichiometry and specificity in the supramolecular immobilization of cytochrome c on a molecular printboard

Here, the stepwise assembly of an electroactive bionanostructure on a molecular printboard is described. The system consists of a cyclodextrin receptor monolayer (molecular printboard) on glass, a divalent linker, streptavidin (SAv), and biotinylated cytochrome c (cyt c). The divalent linker consists of a biotin moiety for binding to SAv and two adamantyl moieties for supramolecular host-guest interaction at the cyclodextrin molecular printboard. The binding of biotinylated cyt c onto a SAv layer bound to preadsorbed linker appeared to be highly specific. The coverages of cyt c as assessed by UV-vis spectroscopy and scanning electrochemical microscopy (SECM) appeared to be identical indicating that all cyt c units remained active. Moreover, the coverage values corresponded well with an estimate based on steric requirements, and the binding stoichiometry was therefore found to be by two biotin moieties of cyt c per one SAv molecule.