The Effect of Bio-Synthesized Silver Nanoparticles on Germination,Early Seedling Development,and Metabolome of Wheat (Triticum aestivum L.)

Changes in the metabolome of germinating seeds and seedlings caused by metal nanoparticles are poorly understood. In the present study, the effects of bio-synthesized silver nanoparticles ((Bio)Ag NPs) on grains germination, early seedlings development, and metabolic profiles of roots, coleoptile, and endosperm of wheat were analyzed. Grains germinated well in (Bio)Ag NPs suspensions at the concentration in the range 10–40 mg/L. However, the growth of coleoptile was inhibited by 25%, regardless of (Bio)Ag NPs concentration tested, whereas the growth of roots gradually slowed down along with the increasing concentration of (Bio)Ag NPs. The deleterious effect of Ag NPs on roots was manifested by their shortening, thickening, browning of roots tips, epidermal cell death, progression from apical meristem up to root hairs zone, and the inhibition of root hair development. (Bio)Ag NPs stimulated ROS production in roots and affected the metabolic profiles of all tissues. Roots accumulated sucrose, maltose, 1-kestose, phosphoric acid, and some amino acids (i.e., proline, aspartate/asparagine, hydroxyproline, and branched-chain amino acids). In coleoptile and endosperm, contrary to roots, the concentration of most metabolites decreased. Moreover, coleoptile accumulated galactose. Changes in the concentration of polar metabolites in seedlings revealed the affection of primary metabolism, disturbances in the mobilization of storage materials, and a translocation of sugars and amino acids from the endosperm to growing seedlings.     

Ochratoxin A and 2′R-Ochratoxin A in Selected Foodstuffs and Dietary Risk Assessment

The aim of this study was to estimate the contamination of grain coffee, roasted coffee, instant coffee, and cocoa purchased in local markets with ochratoxin A (OTA) and its isomerization product 2′R-ochratoxin A (2′R-OTA), and to assess risk of dietary exposure to the mycotoxins. OTA and 2′R-OTA content was determined using the HPLC chromatography with immunoaffinity columns dedicated to OTA. OTA levels found in all the tested samples were below the maximum limits specified in the European Commission Regulation EC 1881/2006. Average OTA concentrations calculated for positive samples of grain coffee/roasted coffee/instant coffee/cocoa were 0.94/0.79/3.00/0.95 µg/kg, with the concentration ranges: 0.57–1.97/0.44–2.29/0.40–5.15/0.48–1.97 µg/kg, respectively. Average 2′R-OTA concentrations calculated for positive samples of roasted coffee/instant coffee were 0.90/1.48 µg/kg, with concentration ranges: 0.40–1.26/1.00–2.12 µg/kg, respectively. In turn, diastereomer was not found in any of the tested cocoa samples. Daily intake of both mycotoxins with coffee/cocoa would be below the TDI value even if the consumed coffee/cocoa were contaminated with OTA/2′R-OTA at the highest levels found in this study. Up to now only a few papers on both OTA and 2′R-OTA in roasted food products are available in the literature, and this is the first study in Poland.     

Novel Conjugated s-Tetrazine Derivatives Bearing a 4H-1,2,4-Triazole Scaffold: Synthesis and Luminescent Properties

A series of new symmetrical s-tetrazine derivatives, coupled via a 1,4-phenylene linkage with a 4H-1,2,4-triazole ring, were obtained. The combination of these two rings in an extensively coupled system has significant potential applications, mainly in optoelectronics. The methodology used turned out to be useful regardless of the type of five-membered ring or the nature of the individual substituents. All the products were identified by spectroscopic methods, and the target compounds were tested for luminescent properties. This study showed that all the synthesized highly-conjugated triazoles exhibited luminescence; in particular, one derivative, 3,6-bis(4-(5-(4-methoxyphenyl)-4-phenyl-4H-1,2,4-triazol-3-yl)phenyl)-1,2,4,5-tetrazine (13b), showed strong fluorescence emission and ahigh quantum yield close to 1.     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Selected local stability problems of channel section flanges made of aluminium alloys

The paper addresses the issue of local buckling of compressed flanges of cold-formed thin-walled channel columns and beams with nonstandard flanges composed of aluminium alloys. The material behaviour follows the Ramberg–Osgood law. It should be noted that the proposed solution may be also applied for other materials, for example: stainless steel, carbon steel. The paper is motivated by an increasing interest in nonstandard cold-formed section shaping in local buckling analysis problems. Furthermore, attention is paid to the impact of material characteristics on buckling stresses in a nonlinear domain. The objective of the paper is to propose a finite element method (FEM) model and a relevant numerical procedure in ABAQUS, complemented by an analytical one. It should be noted that the proposed FEM energetic technique makes it possible to compute accurately the critical buckling stresses. The suggested numerical method is intended to accurately follow the entire structural equilibrium path under an active load in elastic and inelastic ranges. The paper is also focused on correct modelling of interactions between sheets of cross section of a possible contact during buckling analysis. Furthermore, the FEM results are compared with the analytical solution. Numerical examples confirm the validity of the proposed FEM procedures and the closed-form analytical solutions. Finally, a brief research summary is presented and the results are discussed further on.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

Design of selective molecularly imprinted sorbent for the optimized solid‐phase extraction of S‐pramipexole from the model multicomponent sample of human urine

The objective of this article was to design the selective molecularly imprinted sorbent dedicated to the solid‐phase extraction of S‐pramipexole from the complex matrix such as human urine. For that purpose, S‐2,6‐diamino‐4,5,6,7‐tetrahydrobenzothiazole was used as the template acting as the structural analog of S‐pramipexole and five various monomers were employed in the presence of ethylene glycol dimethacrylate to produce molecularly imprinted polymers. The binding capabilities of resulted polymers revealed that the highest imprinting effect was noted for polymer prepared from the itaconic acid. The comprehensive analysis of morphology and the characterization of binding sites showed not only negligible differences in the extension of surfaces of imprinted and nonimprinted polymers but also higher heterogeneity of binding sites in the imprinted material. Comprehensive optimization of the molecularly imprinted solid‐phase extraction allowed to select the most appropriate solvents for loading, washing, and elution steps. Subsequent optimization of mass of sorbent and volumes of solvents allowed to achieve satisfactory total recoveries of S‐pramipexole from the model multicomponent real sample of human urine that equals to 91.8 ± 3.2% for imprinted sorbent with comparison to only 37.1 ± 1.1% for Oasis MCX.     

From Distillation to Standardization: A French Perspective on the Shaping of Turpentine Spirit (1909–1976)

Turpentine is a complex substance of pine resin origin, widely used as a solvent in multiple industries. Attempts to define it, even when elaborated by scientists, have been marked by a whole range of extra-scientific market considerations. While the Pine Institute, a resin chemistry research centre in Bordeaux, succeeded in stabilizing the meaning of the word “turpentine” on the national level in France, its expertise was contested abroad. When the International Organization for Standardization (ISO) Committee 35 tried to establish a new international standard for turpentine, France was accused of protecting its industry by twisting scientific definitions for its own needs. The ISO members clashed over the relationship between trade standards and scientific definitions, at the same time highlighting the epistemological difficulties in constructing both categories.