A new approach to determine method detection limits for compound-specific isotope analysis of volatile organic compounds

Compound-specific isotope analysis (CSIA) has been established as a useful tool in the field of environmental science, in particular in the assessment of contaminated sites. What limits the use of gas chromatography/isotope ratio mass spectrometry (GC/IRMS) is the low sensitivity of the method compared with GC/MS analysis; however, the development of suitable extraction and enrichment techniques for important groundwater contaminants will extend the fields of application for GC/IRMS. So far, purge and trap (P&T) is the most effective, known preconcentration technique for on-line CSIA with the lowest reported method detection limits (MDLs in the low microg/L range). With the goal of improving the sensitivity of a fully automated GC/IRMS analysis method, a commercially available P&T system was modified. The method was evaluated for ten monoaromatic compounds (benzene, toluene, para-xylene, ethylbenzene, propylbenzene, isopropylbenzene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, fluorobenzene) and ten halogenated volatile organic compounds (VOCs) (dichloromethane, cis-1,2-dichloroethene, trans-1,2-dichloroethene, carbon tetrachloride, chloroform, 1,2-dichloroethane, trichloroethene, tetrachlorethene, 1,2-dibromoethane, bromoform). The influence of method parameters, including purge gas flow rates and purge times, on delta13C values of target compounds was evaluated. The P&T method showed good reproducibility, high linearity and small isotopic fractionation. MDLs were determined by consecutive calculation of the delta13C mean values. The last concentration for which the delta13C value was within this iterative interval and for which the standard deviation was lower than +/-0.5 per thousand for triplicate measurements was defined as the MDL. MDLs for monoaromatic compounds between 0.07 and 0.35 microg/L are the lowest values reported so far for continuous-flow isotope ratio measurements using an automated system. MDLs for halogenated hydrocarbons were between 0.76 and 27 microg/L. The environmental applicability of the P&T-GC/IRMS method in the low-microg/L range was demonstrated in a case study on groundwater samples from a former military air field contaminated with VOCs.     

A study on the stereoselectivity of C,O bond formation in esterification of cyclic thiohydroxamic acids

Esterification of cyclic thiohydroxamic acids, for example, N-hydroxypyridine-2(1H)-thione, N-hydroxy-4-methylthiazole-2(3H)-thione, and N-hydroxy-4-(p-chlorophenyl)-thiazole-2(3H)-thione, occurred with inversion of configuration at the attacked stereocenter, as evident from the use of chiral alcohols, alkyl p-toluene sulfonates, and cyclic sulfates. Stereochemical analysis of enantiomerically pure O-alkyl thiohydroxamates was performed on the basis of CD-spectroscopy and chemical derivatization. The assignment of the relative configuration in cyclic O-esters was feasible via NMR spectroscopy, whereas chiral aliphatic glycolato monoesters required hydroxyl group derivatization with chloro-(4R,5R)-bis[(1R,2S,5R)-menth-1-yloxycarbonyl)]-1,3,2-dioxaphospholane for this purpose.     

Reactive force field potential for carbon deposition on silicon surfaces

In this paper a new interatomic potential based on the Kieffer force field and designed to perform molecular dynamics (MD) simulations of carbon deposition on silicon surfaces is implemented. This potential is a third-order reactive force field that includes a dynamic charge transfer and allows for the formation and breaking of bonds. The parameters for Si-C and C-C interactions are optimized using a genetic algorithm. The quality of the potential is tested on its ability to model silicon carbide and diamond physical properties as well as the formation energies of point defects. Furthermore, MD simulations of carbon deposition on reconstructed (100) silicon surfaces are carried out and compared to similar simulations using a Tersoff-like bond order potential. Simulations with both potentials produce similar results showing the ability to extend the use of the Kieffer potential to deposition studies. The investigation reveals the presence of a channelling effect when depositing the carbon at 45°?incidence angle. This effect is due to channels running in directions symmetrically equivalent to the (110) direction. The channelling is observed to a lesser extent for carbon atoms with 30°?and 60°?incidence angles relative to the surface normal. On a pristine silicon surface, sticking coefficients were found to vary between 100 and 73%, depending on deposition conditions.     

Newly Synthesized Thymol Derivative and Its Effect on Colorectal Cancer Cells

Thymol affects various types of tumor cell lines, including colorectal cancer cells. However, the hydrophobic properties of thymol prevent its wider use. Therefore, new derivatives (acetic acid thymol ester, thymol β-D-glucoside) have been synthesized with respect to hydrophilic properties. The cytotoxic effect of the new derivatives on the colorectal cancer cell lines HT-29 and HCT-116 was assessed via MTT assay. The genotoxic effect was determined by comet assay and micronucleus analysis. ROS production was evaluated using ROS-Glo™ H₂O₂ Assay. We confirmed that one of the thymol derivatives (acetic acid thymol ester) has the potential to have a cyto/genotoxic effect on colorectal cancer cells, even at much lower (IC₅₀~0.08 μg/mL) concentrations than standard thymol (IC₅₀~60 μg/mL) after 24 h of treatment. On the other side, the genotoxic effect of the second studied derivative—thymol β-D-glucoside was observed at a concentration of about 1000 μg/mL. The antiproliferative effect of studied derivatives of thymol on the colorectal cancer cell lines was found to be both dose- and time-dependent at 100 h. Moreover, thymol derivative-treated cells did not show any significantly increased rate of micronuclei formation. New derivatives of thymol significantly increased ROS production too. The results confirmed that the effect of the derivative on tumor cells depends on its chemical structure, but further detailed research is needed. However, thymol and its derivatives have great potential in the prevention and treatment of colorectal cancer, which remains one of the most common cancers in the world.     

The Last Fortress of Tin's Tyranny – Protodenitration of Nitroalkanes

Protodenitration, a direct reduction of nitroalkanes to corresponding alkanes, already spans two centuries and is enabled by various reagents. This mini-review provides a historical development of the fundamental transformation and highlights the governing position of the Ono-Tanner reaction employing tributyltin hydride. Due to the unchallenged dominance of the toxic tributyltin hydride and environmentally unpopular solvents sharply contrasting with modern ecological trends, the current situation was dubbed “the last fortress of tin's tyranny.”     

Performance in (Ultra-)high-performance liquid chromatography—How to qualify and optimize instruments in practice

This paper investigates the suitability of an ultra-high-performance liquid chromatography/high-performance liquid chromatography hybrid system for ultra-high-performance liquid chromatography applications. Thus, the effect of extra column band broadening, the gradient system, and the injection system were tested and optimized according to their capabilities. An increase of the theoretical plate number up to a factor of two is achieved by the optimization of the extra column volume into the typical ultra-high-performance liquid chromatography range (<10 μl). Moreover, for qualitative purposes injections of volumes typical for ultra-high-performance liquid chromatography methods are precise. Despite this, a lack of precision and accuracy was determined for the gradient system, and the dwell volume meets the typical specification range for conventional HPLC systems. Therefore, hybrid systems are the intercept between both spectra and are limitedly suitable for ultra-high-performance liquid chromatography applications. Another way to approximate ultra-high-performance liquid chromatography performance using a high-performance liquid chromatography system is superficially porous particles. Thus, H/u curves of 5 μm superficially porous and 3 μm fully porous particles were recorded in order to determine the effect of the particle technology resulting in comparable performance of the used stationary phases.