Interface Orientation and Chain Conformation in Simulated Symmetric Diblock Copolymer Lamellar Systems

Summary: We describe the results of Monte Carlo simulations, based on the cooperative motion algorithm, of the lamellar structure generated at finite temperature by a symmetric diblock copolymer. The (70 × 70 × 70) simulation box in which the polymer chains were embedded for each simulation was rotated, based on the interface orientation, to bring the interfacial planes of the simulated structure into parallel. We found that the interface thickness, as defined by the distribution of the junction points, became narrower at lower temperature, and that the interface plane was characterized by a waviness with a maximum peak‐to‐valley distance of 20–30 lattice bonds. Compared with the isotropic state (T/N = ∞), chains at lower temperatures were stretched in the direction perpendicular to the interface; but only modestly compressed in the direction parallel to the interface. Individual block chains within the lamellar domains still behave like random coils. The block copolymer molecules exhibit only a modest tendency to orient themselves with their end‐to‐end vector perpendicular to the plane of the lamellar interface. Considered as an ensemble average, the results we obtained are similar to those reported from small angle neutron scattering measurements for the mean conformation of the PSd blocks of symmetrical PSd‐PVP diblock copolymers.

2‐D projections onto the X‐Z plane of the end beads for the A‐ and B‐chains (gray) and the junction points J (black) at T/N = 0.2. The interface plane is oriented parallel to the Y‐Z plane by rotating the simulation box. The distribution profiles of junction points and the end beads across the system in the direction of interface normal are shown in the lower part of the figure.     

Gadolinium diethylenetriaminepentaacetic acid hyaluronan conjugates: preparation,properties and applications

We have prepared new hyaluronan (HA) gadolinium diethylenetriaminepentaacetic acid (DTPA) conjugates that have potential as tumor specific contrast agents for magnetic resonance imaging. Conjugates were synthesized, starting with a high molecular weight HA or with HA oligomers, by an efficient 2-step procedure involving first, reaction of ethylenediamine with HA carboxylic acid groups and, second, covalent linkage of DTPA to aminated HA. The final polymers were compared in terms of molar masses and DTPA content. Tapping mode atomic force microscopy has been used to examine the morphology of the polymers in aqueous solution.     

Stratified morphology of a polypropylene/elastomer blend following channel flow

A thermoplastic olefin blend consisting of isotactic polypropylene (PP) and an ethylene‐butene copolymer (EBR) impact modifier (25 wt % EBR) was subjected to a short, high‐shear pulse within the flow channel of a pressure‐driven microextruder following low‐shear channel filling from a reservoir of the melt. The resulting morphology was examined by laser scanning confocal fluorescence microscopy (LSCFM), with contrast provided by a fluorescent tracer in the EBR minor phase. Shear experiments were performed under isothermal conditions with a known wall shear stress for a specified duration, providing a well‐defined thermal and flow history. Low‐shear channel filling produces small droplets across the central region of the channel and large droplets, consistent with steady‐state shear, in the regions near the channel walls. After cooling the molten blend to a crystallization temperature of 153 °C, a brief interval (5 s ～ 1/2000 of the quiescent crystallization time) of high shear (wall shear stress: 0.1 MPa) induces rapid, highly oriented crystallization and a stratified morphology. Ex situ LSCFM reveals a “skin” at the channel walls (～70 μm) in which greatly elongated fiberlike droplets, oriented along the flow direction, are embedded in highly oriented crystalline PP. Further from the walls but directly beside the skin layers are surprising zones in which EBR domains show no deformation or orientation. Several zones of intermediate deformation and orientation at an angle to the flow direction are located closer to the center of the channel. At the center of the channel, EBR droplets are spherical, as expected for channel flow. The various strata are explained by the interplay of droplet deformation, breakup, and coalescence with the shear‐induced crystallization kinetics of the matrix. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2842–2859, 2002     

Synthesis and spectroscopic characterization of symmetrical isoprene–methyl methacrylate diblock copolymers bearing different anthracene derivatives at the junctions

We describe the synthesis and characterization of 1‐(1‐anthryl)‐1‐phenylethylene (1‐An‐E) and 1‐(2‐anthryl)‐1‐phenylethylene (2‐An‐E). These species were used to end cap the living end group of polyisoprene (PI) obtained by anionic polymerization in tetrahydrofuran. The anions generated were used to initiate methyl methacrylate polymerization. In this way, we synthesized two symmetrical PI‐poly(methyl methacrylate) (PMMA) block copolymers each with a single dye at the junction. PI‐An1‐PMMA has an anthracene linked via its 1‐position. PI‐An2‐PMMA has the anthracene linked via its 2‐position. We compare the UV and fluorescence properties of the polymers to model compounds with similar chromophores. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1225–1236, 2003     

Nanoscale co-organization of quantum dots and conjugated polymers using polymeric micelles as templates

Hierarchical organization of light-absorbing molecules is integral to natural light harvesting complexes and has been mimicked by elegant chemical systems. A challenge is to attain such spatial organization among nanoscale systems. Interactions between nanoscale systems, e.g., conjugated polymers, carbon nanotubes, quantum dots, and so on, are of interest for basic and applied reasons. However, typically the excited-state interactions and dynamics are examined in rather complex blends, such as cast films. A model system with complexity intermediate between a film and a supramolecular system would yield helpful insights into electronic energy and charge transfer. Here, we report a simple and versatile approach to achieving spatially defined organization of colloidal CdSe, CdSe/ZnS core/shell, or PbS nanocrystals (quantum dots) with poly(3-hexylthiophenes) (P3HTs) using micelles of poly(styrene-b-4-vinylpyridine) (PS-b-P4VP) as the main structural motif. We compare the characteristics of this system to those of natural light-harvesting complexes. Bulk heterojunction films (and related systems) are characterized by electronic interactions, and therefore dynamics of charge and energy transfer, at interfaces rather than between specific donor-acceptor molecules. Owing to structural disorder, such systems are inherently complex. Therefore, we expect that the spatially defined organization of the active components in the present system provides new opportunities for studying the complicated photophysics intrinsic to blends of nanoscale systems, such as bulk heterojunctions by establishing simplified and better controlled interfaces.     

A comparative thermogravimetric study of polymers designed as dry-developing photoresists

We report a thermogravimetric study of the uncatalyzed and photo-acid-catalyzed decomposition of a series of polyformals and polycarbonates. Some of these polymers have previously been proposed as solventless photoresists. Such polymers should decompose at much lower temperatures when heated in the presence of strong acid than when heated in the absence of acid. In addition, decomposition should lead only to volatile break-down products. We found that most of these polymers underwent clean uncatalyzed thermal decomposition. When heated in the presence of acid, the onset of thermal decomposition occurred at much lower temperatures, as expected, but was accompanied by formation of significant amounts of non-volatile product. We also found that the extent of acid-catalyzed cross-linking (i.e., formation of non-volatile product) in the benzylic polyformals was greater than that for benzylic polycarbonates.     

Solvent induced amplification of the photoresponsive properties of α,ω-di-[4-cyanophenyl-4'-(6-hexyloxy)-azobenzene]-poly(N-isopropylacrylamide) in aqueous media

Irradiation at room temperature of α,ω-di-[4-cyanophenyl-4'-(6-hexyloxy)-azobenzene]-poly-(N-isopropylacrylamide) (Az(2)-PNIPAM) solutions in water/1,4-dioxane (6 mol% dioxane) reversibly converts a turbid suspension into a clear solution, demonstrating for the first time that cononsolvency of PNIPAM in mixed aqueous solvents in synergy with preferential chromophore solvation can act as actuators of responsive systems.     

Synthesis and mass cytometric analysis of lanthanide-encoded polyelectrolyte microgels

This article describes the synthesis and characterization of two series of functional polyelectrolyte copolymer microgels intended for bioassays based upon mass cytometry, a technique that detects metals by inductively coupled plasma mass spectrometry (ICP-MS). The microgels were loaded with Eu(III) ions, which were then converted in situ to EuF(3) nanoparticles (NPs). Both types of microgels are based upon copolymers of N-isopropylacrylamide (NIPAm) and methacrylic acid (MAA), poly(NIPAm/VCL/MAA) (VCL = N-vinylcaprolactam, V series), and poly(NIPAm/MAA/PEGMA) (PEGMA = poly(ethylene glycol)methacrylate, PG series). Very specific conditions (full neutralization of the MAA groups) were required to confine the EuF(3) NPs to the core of the microgels. We used mass cytometry to measure the number and the particle-to-particle variation of Eu ions per microgel. By controlling the amount of EuCl(3) added to the neutralized microgels. we could vary the atomic content of individual microgels from ca. 10(6) to 10(7) Eu atoms, either in the form of Eu(3+) ions or EuF(3) NPs. Leaching profiles of Eu ions from the hybrid microgels were measured by traditional ICP-MS.