Synthesis,characterization, and stability of carbodiimide groups in carbodiimide‐functionalized latex dispersions and films

Cyclohexylcarbodiimidoethyl methacrylate (CCEMA) and t‐butylcarbodiimidoethyl methacrylate (t‐BCEMA) were prepared in a two‐step synthesis. These monomers were then used to prepare carbodiimide‐functionalized PBMA and PEHMA latex particles, employing two‐stage emulsion polymerization, with the carbodiimide–methacrylate monomers being introduced only in the second stage under monomer‐starved conditions. During emulsion polymerization, the carbodiimide moiety ( NCN ) was found to be unstable at pH 4, but stable when the pH of the dispersion was increased to 8, using NaHCO₃ as the buffer. Survival of  NCN group against hydrolysis during the polymerization, and during storage in the dispersion, was enhanced by using EHMA as the comonomer (more hydrophobic) and the t‐butyl carbodiimide derivative. The t‐butyl group provides more steric hindrance to the hydrolysis reaction. A decrease in the reaction temperature from 80°C to 60°C was also found to increase the extent of  NCN group incorporation during emulsion polymerization. Under ideal conditions, more than 98% of the  NCN groups in the monomer feed are successfully incorporated into the latex. When these latex particles are mixed with a  COOH containing latex and allowed to dry, polymer diffusion leading to crosslinking occurs. Films annealed at 60°C reach a gel content of 60% in 10 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 855–869, 2000     

Interface characterization in latex blend films by fluorescence energy transfer

Immiscible polymer blend films were formed by air drying aqueous dispersions containing mixtures of a high-T_g latex, poly(methyl methacrylate), and a film-forming low-T_g latex, poly(butyl methacrylate-co-butyl acrylate). Fluorescence energy transfer experiments were used to characterize the interfaces in these films, in which one component was labeled with a donor dye and the other with an acceptor. The quantum efficiency of energy transfer (Φ_ET) between the donors and acceptors is influenced by the interfacial contact area between the two polymer phases. As the amount of soft component in the blend is increased, Φ_ET approaches an asymptotic value, consistent with complete coverage of the hard polymer surface with soft polymer. This limiting extent of energy transfer is very sensitive to the total surface area in the film, with correspondingly more energy transfer at constant volume fraction for small hard particles. Some of the details of the energy transfer are revealed through a fluorescence lifetime distribution analysis. The presence of ionic surfactant (sodium dodecyl sulfate) in the dispersion from which the latex blend film is prepared reduces the cross-boundary energy transfer by 30%, which implies that in these films the surfactant decreases the interfacial contact. After annealing the surfactant-free blends above 100°C, we observe an increase in energy transfer, consistent with a broader interface between the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1115–1128, 1998     

Analysis of polycyclic aromatic hydrocarbons by ion trap tandem mass spectrometry

An ion-trap mass spectrometer with a wave board and tandem mass spectrometry software was used to analyze gas chromatographically separated polycyclic aromatic hydrocarbons (PAHs) by using collision-induced dissociation (CID). The nonresonant (multiple collision) mode was used to determine the conditions for CID ionization of 18 PAHs. Unlike in electron impact (EI) analysis, the relative abundances of progeny ions of isomers were statistically different (using Student’s t-test) in CID analysis, thus making isomer identification by CID possible. For comparison, CID and EI were applied to the analysis of used motor oil. CID analysis was shown to be more sensitive than EI analysis of the used motor oil. Precision at the 10-ppb level for EI and CID showed relative standard deviations of 5. 2 and 7. 7%, respectively.     

Polymerizable anthracene derivatives for labeling emulsion copolymers

We describe the synthesis of three anthracene–methacrylate monomers [9‐methacryloxymethyl‐10‐methyl anthracene ( 4 ), 9‐methacryloxyethyloxymethyl‐10‐methyl anthracene ( 5 ), and 9‐methacryloxy‐10‐methyl anthracene ( 6 )] as well as their emulsion copolymers containing butylacrylate. When films prepared from latex dispersions containing 4 or 5 were heated, the anthracene (An) group was cleaved from the polymer at temperatures above 120 °C. Lower temperatures induced this reaction when strong acids were present. In 4 and 5 , the polymerizable group is connected to the An ring via a 9‐CH₂O? linkage. The cleavage reaction requires more stringent conditions when the connection involves a benzylic ether ( 5 ) instead of a benzylic ester. Polymers prepared from 6 , with an An? O? bond, were stable for 1 h at 150 °C in the presence of 0.5 wt % p‐toluene sulfonic acid. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1495–1504, 2001     

Polycarbonate particles and dye‐labeled particles by miniemulsion polymerization

We describe the synthesis of several different polycarbonate particles by miniemulsion polymerization. The monomers were allylmethyl carbonate (AlMeC), di(ethylene glycol) bisallylcarbonate (DBAC), and 4‐vinyl‐1,3‐dioxan‐2‐one [vinyl ethylene carbonate (VEC)]. For these polymerizations, higher monomer conversions were obtained with oil‐soluble initiators (azobisisobutyronitrile and benzoyl peroxide) than with a water‐soluble initiator (potassium persulfate). Benzoyl peroxide was particularly effective in yielding particles with a narrow size distribution. Although increasing amounts of a surfactant (sodium dodecyl sulfate) led to smaller particles, the choice of the monomer was the major determinant. For example, in polymerization reactions carried out at 85 °C with benzoyl peroxide as the initiator and with otherwise identical recipes, we obtained particle sizes of 181 nm with AlMeC, 296 nm with VEC, and 203 nm with DBAC. Fluorescent particles were synthesized with comonomers based on the benzothioxanthene nucleus. Because the dyes had poor solubility in the monomers, it was necessary to include typically 20 wt % bromobenzene or dichlorobenzene based on the monomer in the miniemulsion reaction mixture. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1999–2009, 2004     

Characterization of the ground state pyrene complex in ethylene-propylene copolymer solutions

Pyrene-labeled functionalized ethylene-propylene (EP) copolymer was prepared by grafting 1-pyrenebutyrylhydrazine onto EP copolymer through maleic anhydride pendants. The EP copolymer contained 60 mol % ethylene; its weight-average molecular weight (M^w) was 148,000. The pyrene-labeled amide functionalized EP copolymer, PA-EP(60/40), was made to simulate the amine functionalized EP copolymers that are commonly used as dispersant additives in motor oils. UV absorption spectra, fluorescence emission and excitation spectra, and fluorescence decay profiles of the pyrene were studied to determine the copolymer conformation and dynamics in methylcyclohexane and tetrahydrofuran (THF). The pyrene fluorescence characteristics of PA-EP(60/40) were highly dependent on the solvent. The dependence of fluorescence emission intensity on the excitation wavelength was large in methylcyclohexane and moderate in THF. A frequency shift of about 2 nm was observed between the excitation spectrum obtained with the emission line at 377 nm and that at 550 nm in the methylcyclohexane solutions, but no shift was found in the corresponding tetrahydrofuran solutions. The ratios of the preexponential factors (a₂₁/a₂₂) of the excimer decays obtained in both methylcyclohexane and THF solutions were different from ?1.0. However, the deviation of the excimer formation process from the Birks scheme is small in THF but large in methylcyclohexane. In addition, the Huggins constants obtained from intrinsic viscosity measurements of the PA-EP(60/40) copolymer solutions suggest that copolymer aggregation occurs in methylcyclohexane but not in THF. H-bonding between two pyrene-containing pendants is apparently the main driving force for the formation of the ground state pyrene complex. THF is found to be effective in inhibiting the H-bonding formation. © 1995 John Wiley & Sons, Inc.     

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.     

Solvophobic acceleration of Diels-Alder reactions in supercritical carbon dioxide

The rate of the Diels-Alder reaction between N-ethylmaleimide and 9-hydroxymethylanthracene in supercritical carbon dioxide (scCO(2)) was determined by following the disappearance of 9-hydroxymethylanthracene with in situ UV/vis absorption spectroscopy. The reaction conditions were 45-75 degrees C and 90-190 bar, which correspond to fluid densities (based on pure carbon dioxide) ranging between approximately 340 and 730 kg m(-3). The measured reaction rate at low scCO(2) fluid densities was nearly 25x faster than that reported in acetonitrile at the same temperature (45 degrees C). An inverse relationship between reaction rate and fluid density/pressure was observed at all temperatures in scCO(2). The apparent activation volumes were large and positive (350 cm(3) mol(-1)) and only a weak function of reduced temperature. A solvophobic mechanism analogous to those observed in conventional solvents is postulated to describe (a) the rate acceleration observed for this reaction in scCO(2) relative to that in acetonitrile, (b) the observed relationship between reaction rate and pressure/temperature/density, and (c) the large, positive activation volumes. Solubility measurements in scCO(2), rate measurements in conventional solvents, and an empirical correlation are used to support this theory. Our results advance the general understanding of reactivity in supercritical fluids and provide a rationale for selecting reactions which can be accelerated when conducted in scCO(2).     

High-sensitivity quantitation of cabergoline and pergolide using a triple-quadrupole mass spectrometer with enhanced mass-resolution capabilities

Quantitative analysis of pharmaceuticals with low systemic plasma levels requires the utmost in sensitivity and selectivity from the analytical method used. A recently introduced triple-quadrupole mass spectrometer with unique enhanced mass-resolution capability was evaluated in the analysis of two such drugs, cabergoline and pergolide, in plasma. Liquid chromatographic/electrospray ionization selected reaction monitoring determination of cabergoline in plasma at unit mass-resolution demonstrated improved sensitivity (50 fg on-column), coupled with suitable accuracy and precision over a broad linear dynamic range covering five orders of magnitude (50 fg to 5 ng on-column). Liquid chromatographic/atmospheric pressure chemical ionization selective reaction monitoring determination of pergolide in plasma also attained a high level of sensitivity (500 fg on-column) at unit mass-resolution, with accuracy and precision values well within pharmaceutical industry standards. Again, a linear dynamic range covering five orders of magnitude (500 fg to 50 ng on-column) was achieved for the assay. Utility of the enhanced mass-resolution feature of the triple-quadrupole mass spectrometer in the determination of pergolide resulted in an improvement in analyte sensitivity (250 fg on-column) and linear dynamic range (250 fg to 50 ng on-column).