Syntheses and Photophysical Properties of N‐Pyridylimidazol‐2‐ylidene Tetracyanoruthenates(II) and Photochromic Studies of Their Dithienylethene‐Containing Derivatives

A series of tetracyanoruthenate(II) with chelating pyridyl N‐heterocyclic carbene ligands (NHC‐py) was synthesized and characterized. Their photophysical and electrochemical properties as well as the photochromic behavior of their dithienylethene‐containing complexes were studied. Photocyclization was found to take place upon irradiation into the metal‐to‐ligand charge transfer (MLCT) absorption bands of these complexes, and evidence is provided to support the triplet‐sensitizing reaction pathway.     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Studies of wall painting fragments from Kaiping Diaolou by SEM/EDX, micro Raman and FT-IR spectroscopy

The multi-technique analytical approach has proved to be a very effective tool for the analysis of artwork, as demonstrated by various studies. In this work, four micro-analysis methods were used to analyze the wall painting fragments in Kaiping Diaolou, a world cultural heritage enlisted in 2007. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray micro-analysis (EDX), combined with micro Raman and Fourier transform infrared (FT-IR) spectroscopy, provided a vast amount of information concerning the raw materials present in the pigments, organic binder, plasters and mortars of the wall painting. Four types of pigments (goethite, lazurite, chromium green and calcite) were identified on the surface layer of the wall paintings. The substrate under the pigment layer was found to be composed of cubic-like calcite (CaCO₃), micro-rod bundle-shaped syngenite (K₂Ca(SO₄)₂·H₂O), gypsum (CaSO₄·2H₂O) and silica (SiO₂). The organic binder can be attributed to animal glue (such as egg) and drying oil by micro FT-IR spectroscopy. These analysis results can provide important information for the conservation and restoration of the Kaiping Diaolou.     

Chromatography-free Wittig reactions using a bifunctional polymeric reagent

The first example of a polystyrene bearing two distinct reagent groups has been prepared. This phosphine and amine functionalized material was used in one-pot Wittig reactions with an aldehyde and either an α-halo-ester, -ketone, or -amide. Due to the heterogeneous nature of the polymer, the desired alkene product of these reactions could be isolated in excellent yield in essentially pure form after only filtration and solvent removal.     

Tradition- and science-based quality control of Chinese medicines--introducing the Phyto-True system

The current QC practice of quantifying presumed active chemicals or arbitrarily selected chemical markers is of doubtful value in assessing multicomponent complex traditional Chinese medicines (CMs) and often leads to an inconsistent or irreproducible research and clinical outcome. Consequently, the first and most important step in the QC of CMs (or other botanical medicines) whose exact active chemical components are unknown is to use analytical techniques that can comprehensively define the totality of the components/attributes making up their identity and quality. One of the most versatile techniques is HPTLC. Using HPTLC, along with other simple techniques such as FTIR spectroscopy and UV-Vis spectroscopy combined with complementary gene expression profiling, we have been able to correctly identify CM materials, detect adulterants, and differentiate closely related materials and botanical species. Our research has resulted in the introduction of the concept and specimens of Phyto-True Reference Material (PTRM), aka Representative Botanical Reference/Research Material (RBRM), now commercially available, and a novel patent-pending technology (Phyto-True system) that can serve as a starting point for the meaningful QC of traditional CMs so far not possible for these complex materials. Examples will be highlighted to demonstrate this new concept.     

Selection of aptamers for signal transduction proteins by capillary electrophoresis

High‐affinity aptamers for important signal transduction proteins, i.e. Cdc42‐GTP, p21‐activated kinase1 (PAK1) and MRCK (myotonic dystrophy kinase‐related Cdc42‐binding kinase) α were successfully selected in the low micro‐ to nanomolar range using non‐systematic evolution of ligands by exponential enrichment (SELEX) with at least three orders of magnitude enhancement from their respective bulk affinity of naïve DNA library. In the non‐SELEX procedure, CE was used as a highly efficient affinity method to select aptamers for the desired molecular target through a process that involved repetitive steps of partitioning, known as non‐equilibrium CE of equilibrium mixtures with no PCR amplification between successive steps. Various non‐SELEX conditions including the type, concentration and pH of the run buffer were optimized. Other considerations such as salt composition of selection buffer, protein concentration and sample injection size were also studied for high stringency during selection. After identifying the best enriched aptamer pool, randomly selected clones from the aptamer pool were sequenced to obtain the individual DNA sequences. The dissociation constants (K_d) of these sequences were in the low micromolar to nanomolar range, indicating high affinity to the respective proteins. The best binders were also subjected to sequence alignment to generate a phylogenetic tree. No significant consensus region based on approximately 50 sequences for each protein was observed, suggesting the high efficiency of non‐SELEX for the selection of numerous unique sequences with high selectivity.     

Identification of chemicals and their metabolites from PHY906, a Chinese medicine formulation,in the plasma of a patient treated with irinotecan and PHY906 using liquid chromatography/tandem mass spectrometry (LC/MS/MS)

Traditional Chinese Medicine (TCM) is increasingly being used in combination with Western medicine. In general, TCM is comprised of multiple components in sharp contrast to Western medicine, where a single active chemical is used. Presently, there are no well-established standards for most of the chemical compounds of TCM and their respective metabolites. Moreover, there are no formal analytical methods for the identification of these chemicals, especially in trace amounts. The ability to measure the pharmacokinetic behaviors of chemicals and their metabolites from these herbal formulations are critical in understanding of the action of TCM. This paper describes the use of LC/MS/MS along with enzyme treatments and n-octanol/water partition coefficient, to investigate the chemical components of PHY906 and their metabolites in the plasma of a patient with metastatic colorectal cancer (mCRC) treated with irinotecan and PHY906. The chemicals from an aqueous extract of PHY906 and the plasma from a patient was prepared and separated on an Agilent ZORBAX-SB C₁₈ column, and eluted with acetonitrile/0.05% (v/v) formic acid. From the PHY906 aqueous extract, a total of 57 compounds and 27 metabolites were identified and tentatively assigned structures based on their identified mass spectrometry, enzyme digestion and n-octanol/water partition coefficient. In contrast, analysis of patient plasma identified only 33 chemicals and new metabolites. These findings demonstrated that LC/MS/MS was and effective and reliable method for studying the parent chemicals of the Chinese herbal medicine PHY906 and their metabolites in a patient with metastatic colorectal cancer.     

Thermo‐ and Acid‐Responsive Photochromic Spironaphthoxazine‐Containing Organogelators

A series of photochromic spironaphthoxazine derivatives has been designed, synthesized, and characterized by using ¹H NMR spectroscopy, FAB mass spectrometry, and elemental analysis. Their photophysical and photochromic behavior have been investigated. Two of the compounds (G¹²‐en‐SA‐SO and G¹⁶‐en‐SA‐SO) have been shown to be capable of forming stable thermoreversible organogels in organic solvents, tested by the “stable‐to‐inversion of a test tube” method. Addition of p‐toluenesulfonic acid was found to induce the formation of stable organogels at concentrations below that of the critical gelation concentration (c.g.c.), with a concomitant change in color from colorless to purple. Transmission electron microscopy and scanning electron microscopy of the xerogels showed typical fibrous structures in the micrometer scale. The activation parameters for the bleaching reaction of G⁸‐en‐SA‐SO in the solution state and G¹⁶‐en‐SA‐SO in the gel state have been determined in ethanol through kinetic studies at various temperatures. The results showed that the rate of the bleaching reaction in the gel state was much slower than that in the solution state.     

Photo-activated pheophorbide a inhibits the growth of prostate cancer cells

Pheophorbide a (PhA) was identified as a photosensitizer to exert cytotoxicity on tumor cells. However, the efficacy of this compound on the treatment of prostate cancer remains unknown. The aim of this study was to evaluate the photodynamic effect of PhA on prostate cancer cells. Cellular uptake of PhA and cell viability after photo-activation was studied in LNCaP prostate cancer cells. The corresponding production of reactive oxygen species within cells was determined after photodynamic therapy (PDT). Our results showed that the uptake of PhA into LNCaP cells was in a time-dependent manner and the cytotoxicity of PhA-PDT was photosensitizer dose- and light dose-dependent. The intracellular reactive oxygen species was remarkably induced after PDT treatment, which was responsible for the inhibition effect on prostate cancer cells. This is the first report to evaluate the photodynamic effect of PhA on prostate cancer. Our findings demonstrate that PhA-PDT may be a potentially promising treatment for localized prostate cancer, which can be a therapeutic option after the failures of radiotherapy and hormone therapy.     

A grid based particle method for solving partial differential equations on evolving surfaces and modeling high order geometrical motion

We develop numerical methods for solving partial differential equations (PDE) defined on an evolving interface represented by the grid based particle method (GBPM) recently proposed in [S. Leung, H.K. Zhao, A grid based particle method for moving interface problems, J. Comput. Phys. 228 (2009) 7706–7728]. In particular, we develop implicit time discretization methods for the advection–diffusion equation where the time step is restricted solely by the advection part of the equation. We also generalize the GBPM to solve high order geometrical flows including surface diffusion and Willmore-type flows. The resulting algorithm can be easily implemented since the method is based on meshless particles quasi-uniformly sampled on the interface. Furthermore, without any computational mesh or triangulation defined on the interface, we do not require remeshing or reparametrization in the case of highly distorted motion or when there are topological changes. As an interesting application, we study locally inextensible flows governed by energy minimization. We introduce tension force via a Lagrange multiplier determined by the solution to a Helmholtz equation defined on the evolving interface. Extensive numerical examples are also given to demonstrate the efficiency of the proposed approach.