Dinuclear and Mononuclear Platinum(II) and Palladium(II) Complexes with Modified 2,2′‐Dipyridylamine Ligands Featuring a Cisplatin Analogous Structure Motif

In modern cancer therapy the clinical application of platinum‐based drugs is more and more limited by the occurrence of intrinsic or acquired resistances. In this context the potential use of dinuclear platinum complexes in chemotherapy is increasingly relevant. The novel complexes Pd(Bzdpa)Cl₂, Pd₂(C₄H₈(dpa)₂)Cl₄, and Pt₂(C₄H₈(dpa)₂)Cl₄ allow a direct comparison of mono‐ and dinuclear palladium and platinum complexes respectively deriving from a 2,2′‐dipyridylamine (Hdpa) ligand system. They were characterized by single crystal X‐ray analysis as well as infrared spectroscopy and elemental analysis. The cisplatin analogous mononuclear palladium complex Pd(Bzdpa)Cl₂ ( 1 ) (Bzdpa: (2,2′‐dipyridylbenzyl)amine) belongs to a range of 2,2′‐dipyridylamine‐based compounds which were extensively studied in our laboratories. 1 crystallizes in the orthorhombic space group Pna2₁ with a = 13.722(3), b = 13.457(3), c = 9.483(2), V = 1751.1(6) ų, and Z = 4. The metal binding motif of 1 was expanded by a flexible butyl‐linker to form the tetradentate C₄H₈(dpa)₂ ligand. The resulting isotypic dinuclear complexes Pd₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 2 ) and Pt₂(C₄H₈(dpa)₂)Cl₄·2CH₃CN ( 3 ) crystallize in the triclinic space group with a = 7.8427(2), b = 8.7940(2), c = 11.7645 (3), α = 79.219(2)°, β = 84.033(2)°, γ = 87.744(2)°, V = 792.58(3) ų ( 2 ) and a = 7.831(5), b = 8.814(5), c = 11.817(5), α = 79.271(5)°, β = 83.571(5)°, γ = 88.063(5)°, V = 796.3(8) ų ( 3 ), both with one centrosymmetrical molecule in the unit cell.     

Polyvinyl pyridines as flocculating agents

Summary High molecular weight poly 2- and 4-vinyl pyridines were synthesized by ionic polymerisation and their flocculation efficiency tested against kaolin and silica dispersions at pH 3. Low additions of the polymers, around 3 parts per 10₃ parts solid, destabilize the dispersions and clarify silica dispersions to a remarkable extent; however, over-addition of polymer leads to partial restabilization. The flocculation efficiency improves with increase of solids content, especially with clay dispersions. Flocculation efficiency increases with polymer molecular weight, especially over the lower part of the range covered, but is relatively independent of pH in the range 2–4. Quaternization of poly(4-vinyl pyridine) with bromobutane produces a good flocculant for aqueous silica dispersions in which the degree of restabilization on over-dosing depends on the KCI content. TheN-oxide derivatives of the vinyl pyridine polymers do not affect the colloidal stability of silica dispersions. The observations are interpreted in terms of bridging flocculation by the cationic polymer molecules between anionic surface sites on the solid particles.     

The enthalpy of formation of magnesium sulfate ion pairs

The enthalpies of dilution of lithium, sodium, potassium, and magnesium chloride and sulfate solutions in the range 0.1 to 1.0 m have been measured at 30°C with a microcalorimeter. The relative apparent enthalpies φ_L of these solutions have been determined with the aid of an extended form of the Debye-Hückel limiting law $$\phi _L = S_H I^{1/2} [1/(1 + I^{1/2} ) - (\sigma /3)] + {\rm B}{\rm I} + CI^{3/2} $$ whereS _H is the limiting-law slope, σ = 3/I^3/2 × [(1+I^1/2 ? 1/(1+I^1/2 ? 2 ln (2+I^1/2)], andB andC are empirical constants. This equation fits the experimental results to within a standard deviation of 2 cal-mole^?1 for all the salts. The measured φ_L for the MgSO₄ solutions were compared to those calculated using the additivity principle, φ_L(MgCl₂) + φ_L(Na₂SO₄) ? 2φ_L(NaCl), and the extended Debye-Hückel equation. The results of this comparison have been used to calculate the ΔH _A ^o for the formation of MgSO ₄ ⁰ . A value of ΔH _A ^o = 1.15 to 1.36 was obtained, depending upon the φ_L estimates for the free ions Mg²⁺ and SO ₄ ^2? . The results are briefly discussed and compared to the results obtained by other workers.     

Channel activity of a viral transmembrane peptide in micro-BLMs: Vpu(1-32) from HIV-1

We report for the first time on pore-suspending lipid bilayers, which we call micro-black lipid membranes (micro-BLMs), based on a highly ordered macroporous silicon array. Micro-BLMs were established by first functionalizing the backside porous silicon surface with gold and then chemisorbing 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol followed by spreading 1,2-diphytanoyl-sn-glycero-3-phosphocholine dissolved in n-decane. Impedance spectroscopy revealed the formation of single lipid bilayers confirmed by a mean specific capacitance of 0.6 +/- 0.2 microF/cm2. Membrane resistances were in the G omega-regime and beyond. The potential of the system for single channel recordings was demonstrated by inserting the transmembrane domain of the HIV-1 accessory peptide Vpu(1-32), which forms helix bundles with characteristic opening states. We elucidated different amilorides as potential drugs to inhibit channel activity of Vpu.     

Reactions in aminosilane-epoxy prepolymer systems. II. Reactions of alkoxysilane groups with or without the presence of water

The hydrolysis and reactions of alkoxy silane groups have been studied on a model compound (TA) prepared from 2 mol of phenyl glycidyl ether and 1 mol of aminopropyl triethoxy silane. At low (40°C) and high (140°C) temperatures, the monomer conversion and the evolution of the molecular mass are followed by size exclusion chromatography (SEC). During the same reaction time, the evolution of the functional groups, hydroxyl CH? OH, ethoxy ? O? C₂H₅, and siloxane Si? O? Si, is observed by FTIR spectroscopy. Without the presence of water, reactions between hydroxyl and ethoxy silane lead to gelation at the end of the reaction. A by-product, probably a cyclic tetramer is also formed. After the hydrolysis, the reaction of the model compound is quite different. The product of reaction is always soluble, even after a treatment at high temperatures, and the evolution of the molecular mass versus the reaction time seems to correspond to the condensation giving a dead cyclic tetramer. From this study it is evident that the curing cycle has a great influence on the properties of the interface of a composite based on a epoxy matrix.     

Photoinitiated cationic polymerization with triarylsulfonium salts

Triarylsulfonium salts Ar₃S⁺MX with complex metal halide anions such as BF, AsF, PF, and SbF are a new class of highly efficient photoinitiators for cationic polymerization. In this article we describe several synthetic routes to the preparation of these compounds along with their physical and spectroscopic properties. Mechanistic studies have shown that when these compounds are irradiated at wavelengths of 190–365 nm carbon–sulfur bond cleavage occurs to form radical fragments. At the same time the strong Br??nsted acid HMX_n, which is the active initiator of cationic polymerization that takes place in subsequent “dark” steps, is also produced. A study of the parameters that affect the photolysis of triarylsulfonium salts is reported with a measurement of the absolute quantum yields. The cationic polymerizations of four typical monomers—styrene oxide, cyclohexene oxide, tetrahydrofuran, and 2-chloroethyl vinyl ether—with triarylsulfonium salt photoinitiators are described.     

Dipole moments of selenophene analogs of the chalcones

The dipole moments of 24 selenophene analogs of the chalcones have been measured and have been compared with the data calculated by a vectorial additive scheme and also with their chemical structures. Considerations are expressed on the conformational state of the molecules of the compounds investigated. The existence of a correlation between the dipole moments the intramolecular distances, and the Hammett's -parameters has been shown. The applicability of Higashi's equation to the calculation of for , -unsaturated ketones is pointed out.     

Carbolithiation of aromatic rings: cyclohexadienes from N-aroyl-2,2,6,6-tetramethylpiperidines

Benzamides whose nitrogen atom is part of a 2,2,6,6-tetramethylpiperidine ring are dearomatised by alkyllithiums, which attack them regioselectively to yield, after electrophilic quench, substituted cyclohexadienes.     

Time-resolved resonance Raman and density functional theory study of the deprotonation reaction of the triplet state of p-hydroxyacetophenone in water solution

[reaction; see text] Picosecond and nanosecond time-resolved resonance Raman (TR(3)) spectroscopy was employed to investigate the deprotonation/ionization reaction of p-hydroxyacetophenone (HA) after ultraviolet photolysis in water solution. The TR(3) spectra in conjunction with density functional theory (DFT) calculations were used to characterize the structure and dynamics of the excited-state HA deprotonation to form HA anions in near neutral water solvent. DFT calculations based on a solute-solvent intermolecular H-bonded complex model containing up to three water molecules were used to evaluate the H-bond interactions and their influence on the deprotonation reaction and the structures of the intermediates. The deprotonation reaction was found to occur on the triplet manifold with a planar H-bonded HA triplet complex as the precursor species. The HA triplet species is generated within several picoseconds and then decays with a approximately 10 ns time constant to produce the HA triplet anion species after 267 nm photolysis of HA in water solution. The triplet anion species was observed to decay with a time constant of about 90 ns into the ground-state anion species that was found to have a lifetime of about 200 ns. The DFT calculations on the H-bonded complexes of the anion triplet and ground-states species suggest that these anion species are H-bonded complexes with planar quinonoidal structures containing two water molecules H-bonded, respectively, with oxygen lone pairs of the carbonyl and deprotonated hydroxyl moieties. A deactivation scheme of the photoexcited HA in regard to the deprotonation reaction in neutral water solutions was proposed. With the above dynamic and structural information available, we briefly discuss the possible implications of the model HA photochemistry in water solutions for the photodeprotection reactions of related p-HP phototrigger compounds in aqueous solutions.     

Synthesis of SBA-15/carbon composite with an ink-bottle-like pore structure by a novel pulse CVD technique

A novel and easy post modification method, pulse chemical vapor deposition (pulse CVD), was developed to tailor the pore-opening of SBA-15 while largely keeping its surface area and pore volume. By using acetylene as carbon precursor and nitrogen as carrier gas, the pore-mouth of SBA-15 was effectively reduced from 8.1 nm to 5.1 nm within 5 min while maintaining the pore body at 8.1 nm. This ink-bottle-structured SBA-15/carbon composite only losses 12% BET specific surface area and 16% total pore volume, respectively. The SBA-15/carbon composite is highly hexagonally ordered and has similar particle morphology as the original SBA-15. The effect of three pore modification factors—the number of cycles of pulse CVD, the ratio of acetylene/nitrogen and the feeding time of carbon precursor, on the final pore structure of the SBA-15/carbon composite is also studied.