An investigation of the chemical stability of arsenosugars in basic environments using IC-ICP-MS and IC-ESI-MS/MS

This paper evaluates the chemical stability of four arsenosugars using tetramethylammonium hydroxide (TMAOH) as an extraction solvent. This solvent was chosen because of the near quantitative removal of these arsenicals from difficult to extract seafood (oysters and shellfish). Four arsenosugars (3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropylene glycol--As(328), 3-5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropanesulfonic acid--As(392), 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl hydrogen sulfate--As(408), and 3-[5'-deoxy-5'-(dimethylarsinoyl)-beta-ribofuranosyloxy]-2-hydroxypropyl-2,3-hydroxypropyl phosphate--As(482)) were evaluated. The stability of these four arsenosugars were studied independently in a solution of 2.5% TMAOH at 60 degrees C over a period of up to 8 h. Two arsenosugars, As(328) and As(392), were found to be relatively stable in this solution for up to 8 h. However, As(408) and As(482) formed detectable quantities of dimethylarsinic acid (DMAA) and As(328) within 0.5 and 2 h, respectively. It was found that 97% of As(408) degrades after 8 h of treatment producing 3.4 times as much DMAA as As(328). This is contrary to As(482), which produces 13 times as much As(328) as DMAA and only 37% of the As(482) was converted by the 8 h treatment at 60 degrees C. These degradation products led to the investigation of weaker TMAOH extraction solvents. Three different concentrations (2.5%, 0.83% and 0.25%) were used to determine the effect of TMAOH concentration on the degradation rate of As(408). By reducing the TMAOH concentration to 0.83%, the conversion of the arsenosugar to As(328) and DMAA is nearly eliminated (less than 5% loss). Arsenosugars, As(408) and As(482), were also studied in 253 mM NaOH to verify the degradation products. The NaOH experiments were conducted to investigate a possible hydroxide based reaction mechanism. Similar degradation plots were found for each arsenosugar when compared to the 2.5% TMAOH data. A mechanism has been proposed for the formation of As(328) from As(408) and As(482) in base via an SN2 reaction (hydroxide attack) at the side chain carbon adjacent to the inorganic ester. The formation of DMAA is observed in all arsenosugars after prolonged exposure. This probably occurs via an SN2 attack at the arsenic atom.     

Synthesis of biologically active dicarba analogues of the peptide hormone oxytocin using ring-closing metathesis

Facile synthesis of cis and trans olefinic analogues of oxytocin 1 that have carbon in place of sulfur is achieved via ring-closing metathesis (RCM) on a resin-bound linear precursor peptide. Hydrogenation of the cis olefin, 3, proceeds selectively to generate the previously reported saturated derivative 5. Biological testing on rat uterus strips shows that cis compound 3 has an EC50 value of 38 ng/mL (EC50 for oxytocin is 2.7 ng/mL) whereas 5 and trans olefin 4 are less active. [reaction--see text]     

Treatment of radioactive wastes: an X-ray absorption spectroscopy study of the reaction of technetium with green rust

Technetium is a long-lived product of nuclear fission that readily forms the soluble pertechnetate anion [TcO(4)](-). Green rusts (layered hydrous oxides containing both Fe(II) and Fe(III) and with interlayer sulfate or carbonate anions) concentrate >99.8% of 99Tc, present as [TcO(4)](-), from aqueous solution, even in the presence of high concentrations of NaNO(3), a common constituent of radioactive waste streams. The mechanism of removal from solution is apparently reduction and formation of strong Tc(IV) surface complexes. X-ray absorption spectroscopy shows that [TcO(4)](-) is indeed reduced by reaction with both sulfate- and carbonate-form green rusts and is found in a TcO(2)-like environment. On contact with air, the green rusts oxidize to poorly crystalline goethite but the Tc environment is unchanged. There is no increase in Tc solubility associated with oxidation of the host green rust. This behavior suggests that green rusts may be useful in the treatment of Tc-containing waste streams, in groundwater cleanup, and in restricting Tc migration from repositories.     

The enumerative geometry of surfaces and modular forms

Let be a surface, and let be a holomorphic curve in representing a primitive homology class. We count the number of curves of geometric genus with nodes passing through generic points in in the linear system for any and satisfying .

When , this coincides with the enumerative problem studied by Yau and Zaslow who obtained a conjectural generating function for the numbers. Recently, Göttsche has generalized their conjecture to arbitrary in terms of quasi-modular forms. We prove these formulas using Gromov-Witten invariants for families, a degeneration argument, and an obstruction bundle computation. Our methods also apply to blown up at 9 points where we show that the ordinary Gromov-Witten invariants of genus constrained to points are also given in terms of quasi-modular forms.     

Modification of Glycosylation as A Therapeutic Strategy

1. INTRODUCTION

Glycoconjugates play important roles in many cellular and physiological processes, including development, differentiation, cell to cell contact, formation of the intracellular matrix, recognition of microorganisms, macromolecules and small molecules and intracellular transport of proteins.^2,3     

Synthesis of photocleavable poly(methyl methacrylate‐block‐d‐lactide) via atom‐transfer radical polymerization and ring‐opening polymerization

The synthesis and characterization of a photocleavable block copolymer containing an ortho‐nitrobenzyl (ONB) linker between poly(methyl methacrylate) and poly(d ‐lactide) blocks is presented here. The block copolymers were synthesized via atom transfer radical polymerization (ATRP) of MMA followed by ring‐opening polymerization (ROP) of d ‐Lactide and ROP of d ‐lactide followed by ATRP of MMA from a difunctional photoresponsive ONB initiator, respectively. The challenges and limitations during synthesis of the photocleavable block copolymers using the difunctional photoresponsive ONB initiator are discussed. The photocleavage of the copolymers occurs under mild conditions by simple irradiation with 302 nm wavelength UV light (Relative intensity at 7.6 cm: 1500 μW/cm²) for several hours. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4309–4316     

Ring‐opening metathesis copolymerization of cyclooctene and a carborane‐containing oxanorbornene

The incorporation of a silyl‐protected oxanorbornene imide carborane (SONIC) in polyethylene‐like materials is reported. These copolymers were obtained via ring‐opening metathesis copolymerization of (SONIC) and cyclooctene followed by hydrogenation with p‐toluenesulfonylhydrazide. The composition of the copolymer was varied by altering the feed ratio. Structural and thermal properties were investigated and compared with that of a model polymer so as to gauge the impact on the inclusion of the silyl‐functionalized carborane. An initial observation of the modification of the chain sequence upon changing solvent polarity is also discussed. Finally, the potential utilization of these materials as radiation shielding materials is mentioned. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2557–2563, 2010