Low-loss amorphous silicon-on-insulator technology for photonic integrated circuitry

We report the fabrication of low-loss amorphous silicon photonic wires deposited by plasma enhanced chemical vapor deposition. Single mode photonic wires were fabricated by 193 nm optical lithography and dry etching. Propagation loss measurements show a loss of 3.46 dB/cm for photonic wires and 1.34 dB/cm for ridge waveguides.     

Separation of diisopropylnaphthalene isomers

The separation of diisopropylnaphthalenes was reinvestigated. The application of GC × GC appears to be a clear and necessary improvement over the use of single column techniques, with a polar (CP-Wax-52) column as reference technique, and a non-polar (CP-Sil-8) column as an alternative. Both qualitative and quantitative separations of DIPN isomers showed to be superior on GC × GC. The composition of both a DIPN mixture resulting from a typical experiment with a zeolite catalyst and a commercial one could be quantitatively determined in this way.     

Pentagerma[1.1.1]propellane: A Combined Experimental and Quantum Chemical Study on the Nature of the Interactions between the Bridgehead Atoms

Ge, whiz! A detailed study of the synthesis, structure, redox chemistry, and bonding properties of pentagerma[1.1.1]propellane ( 1 , see picture) examines fundamental aspects of the interactions between the bridgehead germanium atoms. DFT and CASSCF calculations unravel the biradicaloid characteristics of 1 , and preliminary reactivity studies indicate that 1 features some radical‐type behavior.

     

Detection enhancement in nano-channels using micro-machined silicon groove

The present paper reports on an experimental study of the possibility to use a micro-machined detection groove to enhance the detection sensitivity in flat-rectangular nano-channels for ultra-rapid liquid chromatography separations. Transversally running detection grooves with three different axial widths (respectively, 2, 4 and 6mum) and one depth (4.75mum) were tested in glass and silicon channels for the whole range of detectable fluorescein isothiocyanate isomer I, FITC, concentrations. The groove with the most square-like cross-section (i.e., 4mum wide and 4.75mum deep) yielded the best combination of detection gain and minimal additional band broadening. In a 1cm long channel, the effective plate loss caused by the 4mum wide groove would only be of the order of 20%, while the gain in S/N-ratio was of the order of a factor of 5. The detection groove concept yields larger gains in silicon channel substrates than in glass channel substrates, due to the larger stray light losses occurring in the latter.     

Ultra-rapid separation of an angiotensin mixture in nanochannels using shear-driven chromatography

The present paper reports on the separation of a mixture of fluorescein isothiocyanate-labeled angiotensin I and II peptides in a shear-driven nanochannel with a C18-coating and using an eluent consisting of 5% acetonitrile in 0.02 M aqueous phosphate buffer at pH 6.5. The flat-rectangular nanochannel in fused silica consisted of an etched structure in combination with a flat moving wall. The very fast separation kinetics that can be achieved in a nanochannel allowed to separate the angiotensin peptides in less then 0.2 s in a distance of only 1.8 mm. Plate heights as small as 0.4 microm were calculated after substraction of the injection effect.     

Performance limits of monolithic and packed capillary columns in high-performance liquid chromatography and capillary electrochromatography

A method is proposed for the comprehensive characterization and comparison of columns in the high-performance liquid chromatographic (HPLC) and capillary electrochromatographic (CEC) modes. Using this approach, column parameters such as the number of plates, the eddy-diffusion and mass-transfer contributions to peak broadening, the permeability, and the analysis time are incorporated in a single graph and a comparison in terms of efficiency and speed is obtained. The chromatographic performance of silica-based and polymer-based monolithic capillary columns is discussed and a comparison is made with the performance of packed columns. Also, the potential of ultra-high-pressure liquid chromatography is discussed in this context. In the HPLC mode, the best results were obtained with silica monoliths; in the CEC mode, the low-density methacrylate-ester-based monoliths showed the best performance.     

Recent applications in capillary electrochromatography

In this review research papers on the application of CEC are summarized that have been published between May 2003 and May 2005. First, a short overview is given of trends and developments in CEC that may increase the applicability of the separation technique. Next, application-oriented research using CEC is described in biochemical studies, including proteomics and genomics, in the analysis of food and natural products, and in pharmaceutical, industrial, and environmental analysis.     

Spin-orbit Splitting and Lifetime Broadening in the A2Δ Electronic State of l-C5H

Optical absorption bands at ～18772 and ～18807 cm^-1, previously assigned to A²Δ-X2Π electronic origin band transitions of the linear carbon-chain radicals C₅H and C₅D, respec-tively, have been reinvestigated. The spectra have been recorded in direct absorption apply-ing cavity ring-down spectroscopy to a supersonically expanding acetylene/helium plasma. The improved spectra allow deducing a l-C₅H upper state spin-orbit coupling constant A'=-0.7(3) cm^-1 and a A²Δ lifetime of 1.6±0.3 ps.     

The design of Helmholtz resonator based acoustic lenses by using the symmetric Multi-Level Wave Based Method and genetic algorithms

Sonic crystals can be used as acoustic lenses in certain frequencies and the design of such systems by creating vacancies and using genetic algorithms has been proven to be an effective method. So far, rigid cylinders have been used to create such acoustic lens designs. On the other hand, it has been proven that Helmholtz resonators can be used to construct acoustic lenses with higher refraction index as compared to rigid cylinders, especially in low frequencies by utilizing their local resonances. In this paper, these two concepts are combined to design acoustic lenses that are based on Helmholtz resonators. The Multi-Level Wave Based Method is used as the prediction method. The benefits of the method in the context of design procedure are demonstrated. In addition, symmetric boundary conditions are derived for more efficient calculations. The acoustic lens designs that use Helmholtz resonators are compared with the acoustic lens designs that use rigid cylinders. It is shown that using Helmholtz resonator based sonic crystals leads to better acoustic lens designs, especially at the low frequencies where the local resonances are pronounced.