An improved water-filled impedance tube

A water-filled impedance tube capable of improved measurement accuracy and precision is reported. The measurement instrument employs a variation of the standardized two-sensor transfer function technique. Performance improvements were achieved through minimization of elastic waveguide effects and through the use of sound-hard wall-mounted acoustic pressure sensors. Acoustic propagation inside the water-filled impedance tube was found to be well described by a plane wave model, which is a necessary condition for the technique. Measurements of the impedance of a pressure-release terminated transmission line, and the reflection coefficient from a water/air interface, were used to verify the system.     

Abrasion-ablation model for neutron production in heavy ion collisions

In intermediate energy nucleus-nucleus collisions, neutron production at forward angles is observed to occur with a Gaussian shape that is centered near the beam energy and extends to energies well above that of the beam. This paper presents an abrasion-ablation model for making quantitative predictions of the neutron spectrum. To describe neutrons produced from the abrasion step of the reaction where the projectile and target overlap, we use the Glauber model and include effects of final-state interactions. We then use the prefragment mass distribution from abrasion with a statistical evaporation model to estimate the neutron spectrum resulting from ablation. Measurements of neutron production from Ne and Nb beams are compared with calculations, and good agreement is found.     

Focused ion beam preparation of samples for X‐ray nanotomography

The preparation of hard material samples with the necessary size and shape is critical to successful material analysis. X‐ray nanotomography requires that samples are sufficiently thin for X‐rays to pass through the sample during rotation for tomography. One method for producing samples that fit the criteria for X‐ray nanotomography is focused ion beam/scanning electron microscopy (FIB/SEM) which uses a focused beam of ions to selectively mill around a region of interest and then utilizes a micromanipulator to remove the milled‐out sample from the bulk material and mount it on a sample holder. In this article the process for preparing X‐ray nanotomography samples in multiple shapes and sizes is discussed. Additionally, solid‐oxide fuel cell anode samples prepared through the FIB/SEM technique underwent volume‐independence studies for multiple properties such as volume fraction, average particle size, tortuosity and contiguity to observe the characteristics of FIB/SEM samples in X‐ray nanotomography.     

Superdeformed bands and ‘shears’ bands in 197Pb and 198Pb

Excited states in ¹⁹⁷Pb and ¹⁹⁸Pb, produced in the ¹⁸⁶W (¹⁸O,xn) reaction, were studied using the EUROGAM phase 2 γ ray spectrometer array. Two new superdeformed bands have been observed in ¹⁹⁷Pb, and the existence of a superdeformed band in ¹⁹⁸Pb has been confirmed. The increased statistics provided by the latest generation of arrays has resulted in the reordering of some of the previous known cascades of magnetic dipole transitions, with the first observation of the extremely weak E2 crossover transitions.     

Crosstalk between two-photon and two-color (two-photon) excitation in optical beam induced current generation with two confocal excitation beams

We analyze the influence of residual two-photon excitation (2PE) in two-color (two-photon) optical beam induced current (2CE-OBIC) generation in wide band gap semiconductor samples. 2CE-OBIC generation is accomplished with two confocal excitation beams of separation angle θ and wavelengths λ₁ and λ₂ where , λ_e = hc/E_b, h is the Planck’s constant, c is speed of light in vacuum, and E_b is the energy band gap. Because the conduction band of the sample is a continuum, at least one excitation beam would also contribute an undesirable 2PE-OBIC signal that degrades the signal-to-noise ratio of the measured 2CE-OBIC response and broadens the effective OBIC distribution in the sample particularly when θ ≠ 0 or π. We show that the deleterious effects of crosstalk are reduced by a careful selection of λ₁ and λ₂ and the relative excitation beam intensities. λ₁ and λ₂ should be chosen to minimize the ratio of the two-photon absorption coefficients (β₁, β₂) to the 2CE absorption coefficient β₁₂ or at least satisfy the constraint: β₁ + β₂  β₁₂. Keeping the two excitation intensities equal is beneficial only when β₁ = β₂. Otherwise, it is advantageous to bias the intensity ratio towards the wavelength with a lower 2PE absorption coefficient.     

Hole burning—EIT studies of the NV centre in diamond

The negative nitrogen-vacancy centre in diamond is used to illustrate electromagnetically induced transparency features within a coherent hole. A hole is created in an inhomogeneously broadened electron spin transition and its spectrum modified by driving hyperfine transitions. The modified spectrum is discussed in terms of dressed states of the system, and the spectrum is shown to be in good correspondence with numerical solutions of the density matrix for the doubly driven system.     

Anisotropic equipartition state in a charged particle beam

The purpose of this Letter is to conjecture a characterization of the anisotropic equipartition state. The anisotropic equipartition state is defined through a phase space density which is uniform on the invariant surface of ξ, where ξ is the ratio between the oscillation energies in the x- and y-directions. It is a version of the ergodic hypothesis where the invariant surface of ξ plays the role of the conserved energy. We show that the anisotropic equipartition state is characterized by the following properties: the development of an elliptical shape with increasing size along the x-direction, the presence of a coupling between transversal emittances, halo formation along a preferential direction, stationarity of the temperature and a growth of the entropy in the cascade form.     

New excited superdeformed bands in heavy Pb nuclei: Clue for an octupole softness near the N = 118 gap at large deformation

We report the identification of six new superdeformed (SD) bands in ^197,198Pb observed with the EUROBALL IV spectrometer. The results are interpreted in the framework of cranked Hartree-Fock calculations with approximate projection on the particle number by means of the Lipkin-Nogami method. A mixing between quasi-particle excitations and an octupole vibration is suggested in the two SD isotopes. We have estimated the ordering of the neutron valence orbitals and confirm indirectly a N = 118 SD gap. Received: 20 December 2000 / Accepted: 24 January 2001     

Rotational isomerism in 3-chloro-1-propanol from the microwave spectrum

The rotational spectra of two conformations of 3-chloro-propanol were observed for the four possible $\text{Cl(35)}\text{Cl(37)}$ and $\text{H}\text{D}$ isotopic species. For both conformations the oxygen atom is gauche with respect to the C₂C₃ bond and the hydroxyl hydrogen is trans with respect to the C₂C₁ bond. In one conformation (T) the chlorine is trans with respect to C₁C₂ and it is gauche in the other form (G). The ground state of the G form is about 0.7 kcal/mole more stable than that of the T form. A discussion is given about the failure to observe the H bond species. The most likely reason is the too close approach of Cl and O in this hypothetical configuration. The quadrupole coupling constants were obtained for the G form. The rotational spectra of five excited states of the T form and of one excited state of the G species were measured. Partial r₀ and r_s structures are given.