Low molecular weight proteins in urines from healthy subjects as well as diabetic,nephropathic and diabetic‐nephropathic patients: a MALDI study

Urine samples from healthy subjects as well as diabetic, nephropathic and diabetic‐nephropathic patients were analyzed by matrix assisted laser desorption/ionization (MALDI) mass spectrometry in order to establish evidence of some possible differences in the peptide profile related to the pathological states. Multivariate analysis suggested the possibility of a distinction among the considered groups of patients. Some differences have been found, in particular, in the relative abundances of three ions at m/z 1912, 1219 and 2049. For these reasons, further investigation was carried out by MALDI/TOF/TOF to determine the sequence of these peptides and, consequently, to individuate their possible origin. By this approach, the peptide at m/z 1912 was found to originate from uromodulin, and its lower expression in the case of nephropathy can be well related to the pathological condition. Ions at m/z 2049 and 1219 originate from the collagen α‐1(I) chain precursor and from the collagen α‐5 (IV) chain precursor, respectively, and, also in this case, their different expressions can be related to the pathologies under investigation. The obtained data seem to indicate that urine is an interesting biological fluid to investigate on the peptide profile and to obtain, consequently, information on the dismetabolism activated by specific pathologies. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of MoO3 nanorods for lithium battery using PVP as a surfactant

We synthesized MoO₃ nanorods using poly (vinyl pyrrolidone) (PVP) as a surfactant through the hydrothermal route for making a cathode for a lithium battery. Scanning electron microscopy images reveal the structures to have dimensions on the order of 1–10 μm in length and 50–200 nm in diameter. Analytical techniques such as X-ray diffractometry, Fourier transformation infrared spectroscopy, thermogravimetric analysis, and cyclic voltammetry were used to characterize the nanorods. The measured specific charge of MoO₃ nanorods prepared through a 15-day hydrothermal reaction was 156 mAhg⁻¹ during the initial discharge process.     

Understanding consumer adoption of broadband: an extension of the technology acceptance model

Broadband offers several benefits to consumers over its preceding technology ‘narrowband’. Despite it offering such benefits, many countries are still experiencing low levels of adoption of broadband technology by consumers. This study presents an extended technology acceptance model (TAM) that integrates perceived resources, self-efficacy and social influence into the TAM in order to investigate factors determining consumer adoption of broadband. The model was empirically tested employing data collected from a survey of broadband consumers in the United Kingdom. A regression analysis was conducted to evaluate the influence of predictive constructs on behavioural intention to adopt broadband and actual adoption behaviour. Findings of the study indicated that all variables significantly affected consumers' behavioural intention to adopt broadband. The outcomes of the paper will be useful for the stakeholders such as internet service providers and governments interested in encouraging the adoption of broadband. The implications of this work to both researchers and practitioners is discussed.     

Streamlined sample preparation procedure for determination of perchlorate anion in foods by ion chromatography-tandem mass spectrometry

A rapid, sensitive, and specific method was developed for the determination of perchlorate anion in foods. The foods included high moisture fruits and vegetables, low moisture foods (e.g. wheat flour and corn meal), and infant foods. Improvements to existing procedures were made in sample preparation that reduced sample test portion size from 100 to 5 or 10 g, extraction solvent volume from 150 to 20-40 ml, and replaced blending extraction-vacuum filtration and their associated large glassware with a simple shakeout-centrifugation in a small conical tube. Procedures common to all matrices involved: extraction, centrifugation, graphitized carbon solid phase extraction (SPE) cleanup, and ion chromatography-tandem mass spectrometry (IC-MS/MS) analysis. A Waters IC-Pak Anion HR column (4.6 mm × 75 mm) was eluted with 100 mM ammonium acetate in 50:50 (v/v) acetonitrile/water mobile phase at a rate of 0.35 ml/min. A triple stage quadrupole mass spectrometer, equipped with electrospray ionization (ESI) in the negative ion mode, was used to detect perchlorate anion. An ¹⁸O₄-labeled perchlorate anion internal standard was used to correct for any matrix effects. The method limit of quantitation (LOQ) was: 1.0 μg/kg in fruits, vegetables, and infant foods; 3.0 μg/kg in dry products. Fortified test portions gave 80-120% recoveries. Determination of incurred perchlorate anion residues agreed well with results for comparable commodities or products analyzed by published methods.     

Optical, redox, and NLO properties of tricyanovinyl oligothiophenes: comparisons between symmetric and asymmetric substitution patterns

A series of tricyanovinyl (TCV)-substituted oligothiophenes was synthesized and investigated with a number of physical methods including UV/Vis, IR, and Raman spectroscopy, nonlinear optical (NLO) measurements, X-ray diffraction, and cyclic voltammetry. Mono- or disubstituted oligomers were prepared by the reaction of tetracyanoethylene with mono- or dilithiated oligomers. The comparative effects of the symmetric and asymmetric substitutions in the electronic and molecular properties have been addressed. These oligomers display dramatic reductions in both their optical and electrochemical band gaps in comparison with unsubstituted molecules. The analysis of the electronic properties of the molecules was assisted by density functional theory calculations, which are in excellent agreement with the experimental data. TCV substitution influences the energies of the frontier orbitals, especially with respect to the stabilization of LUMO orbitals. X-ray structural characterization of a monosubstituted oligomer exhibits pi-stacking with favorable intermolecular interactions. NLO results agree with the role of the intramolecular charge-transfer feature in the asymmetric samples. These results furthermore exalt the role of conformational flexibility in the disubstituted compounds and reveal an unexpected nonlinear optical activity for symmetric molecules. Regarding the electronic structure, the interpretation of the vibrational data reflects the balanced interplay between aromatic and quinoid forms, finely tuned by the chain length and substitution pattern. The electronic and structural properties are consistent with the semiconducting properties exhibited by these materials in thin film transistors (TFTs).     

A measuring system for the fast simultaneous isotope ratio and elemental analysis of carbon, hydrogen, nitrogen and sulfur in food commodities and other biological material

The isotope ratio of each of the light elements preserves individual information on the origin and history of organic natural compounds. Therefore, a multi-element isotope ratio analysis is the most efficient means for the origin and authenticity assignment of food, and also for the solution of various problems in ecology, archaeology and criminology. Due to the extraordinary relative abundances of the elements hydrogen, carbon, nitrogen and sulfur in some biological material and to the need for individual sample preparations for H and S, their isotope ratio determination currently requires at least three independent procedures and approximately 1 h of work. We present here a system for the integrated elemental and isotope ratio analysis of all four elements in one sample within 20 min. The system consists of an elemental analyser coupled to an isotope ratio mass spectrometer with an inlet system for four reference gases (N(2), CO(2), H(2) and SO(2)). The combustion gases are separated by reversible adsorption and determined by a thermoconductivity detector; H(2)O is reduced to H(2). The analyser is able to combust samples with up to 100 mg of organic material, sufficient to analyse samples with even unusual elemental ratios, in one run. A comparison of the isotope ratios of samples of water, fruit juices, cheese and ethanol from wine, analysed by the four-element analyser and by classical methods and systems, respectively, yielded excellent agreements. The sensitivity of the device for the isotope ratio measurement of C and N corresponds to that of other systems. It is less by a factor of four for H and by a factor of two for S, and the error ranges are identical to those of other systems.     

Reflection anisotropy spectroscopy study of the adsorption of sulfur-containing amino acids at the Au(110)/electrolyte interface

Protein interactions with surfaces are key to understanding the behavior of implantable medical devices. The optical technique of reflection anisotropy spectroscopy (RAS) has considerable potential for the study of interactions between important biological molecules and surfaces. This study used RAS to investigate the adsorption of S amino acids onto Au(110) in a liquid environment under different conditions of potential and pH. Certain spectral features can be associated with the Au(110), as reported previously, while other features are assigned to bonds between the amino acids and the Au surface. The RA spectra are shown to be influenced by the structure of the amino acid, the solution pH, and the applied electrode potential. This work has assigned the negative feature at 2.5 eV to the Au-thiolate, bond while the positive feature at 2.5 eV is assigned to the disulfide bond. The broad spectral feature at 3.5 eV is attributed to the Au-amino interaction, while the sharper feature at slightly higher energy is associated with the Au-carboxylate interaction. Sulfur-containing amino acids are frequently found on the outside of protein molecules and could be used to anchor the protein to the surface.     

An EPR, ENDOR and EIE study of gamma-irradiated poly (lactide-co-glycolide) polymers

Gamma radiation of poly (lactide-co-glycolide) raw polymers and processed microspheres under vacuum and at 77 K results in the formation of a series of free radicals. The resulting powder electron paramagnetic resonance (EPR) spectrum contains a distribution of several different radicals, depending on the annealing temperature, and is therefore difficult to interpret. By utilising the selectivity of the electron nuclear DOuble resonance (ENDOR) and associated ENDOR induced EPR (EIE) techniques, a more direct approach for the deconvolution of the EPR spectrum can be achieved. Using this approach, the radiolytically induced CH3 *CHC(O)R- chain scission radical was identified at 120 K by simulation of the EIE spectrum. At elevated temperatures (250 K), this radical decays considerably and the more stable radicals -O*CHC(O)-, CH3 *C(OR)C(O)- and CH3 *C(OH)C(O)- predominate. This work demonstrates the utility of the EIE approach to supplement and aid the interpretation of powder EPR spectra of radicals in a polymer matrix.     

Drug nanoparticles by antisolvent precipitation: mixing energy versus surfactant stabilization

Organic itraconazole (ITZ) solutions were mixed with aqueous solutions to precipitate sub-300 nm particles over a wide range of energy dissipation rates, even for drug loadings as high as 86% (ITZ weight/total weight). The small particle sizes were produced with the stabilizer poloxamer 407, which lowered the interfacial tension, increasing the nucleation rate while inhibiting growth by coagulation and condensation. The highest nucleation rates and slowest growth rates were found at temperatures below 20 degrees C and increased with surfactant concentration and Reynolds number (Re). This increase in the time scale for growth reduced the Damkohler number (Da) (mixing time/precipitation time) to low values even for modest mixing energies. As the stabilizer concentration increased, the average particle size decreased and reached a threshold where Da may be considered to be unity. Da was maintained at a low value by compensating for a change in one variable away from optimum conditions (for small particles) by manipulating another variable. This tradeoff in compensation variables was demonstrated for organic flow rate vs Re, Re vs stabilizer concentration, stabilizer feed location (organic phase vs aqueous phase) vs stabilizer concentration, and stabilizer feed location vs Re. A decrease in the nucleation rate with particle density in the aqueous suspension indicated that secondary nucleation was minimal. A fundamental understanding of particle size control in antisolvent precipitation is beneficial for designing mixing systems and surfactant stabilizers for forming nanoparticles of poorly water soluble drugs with the potential for high dissolution rates.     

Highly active titanium-based olefin polymerization catalysts supported by bidentate phenoxyamide ligands

Phenoxyamide complexes of Ti-containing 2,6-X2C6H3 (X = Cl, Br) substituents, when activated by methyl aluminoxane, afford catalysts with very high activities for the polymerization of ethylene and with good incorporation of 1-hexene.