Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Derivatisation for liquid chromatography/electrospray mass spectrometry: synthesis of pyridinium compounds and their amine and carboxylic acid derivatives

A simple method has been developed for the pre-column derivatisation of low molecular weight primary and secondary amines and carboxylic acids using quaternary nitrogen compounds to enhance their detection by liquid chromatography/electrospray ionisation mass spectrometry (LC/ESI-MS). The synthesis of seven novel quaternary nitrogen reagents is described. The derivatives are designed to be relatively small molecules to avoid some of the steric hindrance problems that may be associated with larger derivatisation reagents. The compounds have amine and carboxylic acid functional groups with which to derivatise carboxylic acids and amines, respectively. Two of the compounds contain a bromine atom in order to assess the advantages of a bromine isotope pattern in the mass spectra. This acts as a simple marker for derivatisation and enables data processing by cluster analysis.Activation of the carboxylic acid group was achieved by the use of either 1-chloro-4-methylpyridinium iodide (CMPI) or the more reactive 1-fluoro-4-methylpyridinium p-toluenesulphonate (FMP).1 Using both of these active reagents, the degree of nucleophilic substitution was investigated for the derivatisation of a variety of small molecules. Whilst giving some increase in the ESI-MS response for the derivatised compounds, the FMP itself acted as a derivatising reagent in a competing reaction. In the light of this finding, FMP was reacted with the test compounds separately and gave positive results as a derivatising reagent. Detection of the 'pre-charged' derivatives of amines and carboxylic acids by LC/ESI-MS was investigated with respect to their ESI response and chromatography.     

Inter-method comparison for the determination of antimony and arsenic in peat samples

Four analytical approaches, based on different physical principles, for the determination of antimony (Sb) and arsenic (As) in ancient peat samples were critically evaluated: (a) open vessel digestion/hydride generation-atomic absorption spectrometry (HG-AAS), (b) closed-pressurized digestion in a microwave oven followed by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS), (c) digestion in a microwave autoclave and subsequent quadrupole-inductively coupled plasma-mass spectrometry (Q-ICP-MS) measurements and (d) instrumental neutron activation analysis (INAA). The quality control scheme applied, always included the use of adequate plant reference materials to ensure the accuracy and precision of the analytical procedures. Additionally, two internal peat reference materials were analyzed using all four analytical approaches, generally showing good agreement for both elements. Method detection limits for As and Sb provided by all procedures were approximately 5 and 2 ng g⁻¹ which is sufficiently low for the reliable quantification of both elements in ancient, pre-anthropogenic peat samples. A comparison of As and Sb concentrations in a set of peat samples determined by INAA, HG-AAS and SF-ICP-MS revealed that INAA underestimated the values in a systematic manner, whereas HG-AAS and SF-ICP-MS data agreed very well. Best precision of the results was obtained by analytical procedures involving HG-AAS or Q-ICP-MS and varied from 3.6 to 4.3% and 7.1 to 7.5% for As (at about 0.5 μg g⁻¹) and Sb (at about 0.1 μg g⁻¹), respectively. The highest sample throughput (40 samples per run accomplished in 2 h) combined with low risk of sample contamination could be realized in the high-pressure microwave autoclave. The amount of sample required by all approaches was 200 mg, except for INAA which needed at least 25 times more sample mass to achieve comparable detection limits. For the quantification of As and Sb, inductively coupled plasma-mass spectrometry (ICP-MS) was preferred over INAA and HG-AAS, mainly because (a) less sample is needed and (b) As and Sb can be determined simultaneously. In addition, ICP-MS offers the possibility to measure concurrently a wide range of other elements which also are of environmental interest.     

Mediated amperometric biosensors for d-galactose,glycolate and l-amino acids based on a ferrocene-modified carbon paste electrode

Direct-current cyclic voltammetry is used to investigate the suitability of a ferrocene derivative as a mediator with galactose, glycolate and l-amino acid oxidases. The three enzymes coupled catalytically to ferrocene monocarboxylic acid exhibiting homogeneous second-order rate constants in the range 0.4 × 10⁵ to 8.5 × 10⁵ l mol^?1 s^?1. Enzyme electrodes which responded to d-galactose, glycolate or l-amino acids were constructed. The appropriate oxidase was retained behind a dialysis membrane at a carbon paste electrode containing the poorly soluble derivative 1,1′-dimethylferrocene. All the electrodes responded rapidly to millimolar concentrations of their respective substrates producing 95% of the steady-state current response in <2 min. This general method of biosensor construction should be widely applicable to oxidases and other oxidoreductase enzymes.     

The structure of malabricol

A single crystal X-ray analysis has confirmed the constitution and established the stereochemistry of the triterpene, malabaricol.     

Reactions of triosmium clusters with organic azides; x-ray crystal structures of [Os3(CO)10(NCMe)(N3COPh)], [Os3(μ-H)(CO)10(HN3Ph)], and [Os3(μ-H)2(CO)9(μ3-NPh)]

Organic azides [N₃R] react with [Os₃(CO)₁₁(NCMe)] and with [Os₃(μ-H)₂(CO)₁₀] to form [Os₃(CO)₁₀(NCMe)(N₃COR)] (R  Ph) and [Os₃(μ-H)(CO)₁₀(HN₃R)] (R  Ph, n-Bu, CH₂Ph, cyclo-C₆H₁₁), respectively; the latter may be converted to [Os₃(μ-H)₂(CO)₉(μ₃-NR)] by thermolysis; the molecular structure of the phenyl derivative of each class of compound has been confirmed by x-ray analysis.     

Germacreme derivatives from diverse marine soft-corals (octocorallia)

Examinations of the extracts of 8 taxonomically-diverse marine soft-corals (Orders Gorgonaceae, Alcyonaceae and Stolonifera, Subclass Octocorallia, Phylum Cnidaria), have resulted in the isolation of 4 new sesquiterpenoids (1–4) of the germacrene type. Three previously known germacrene derivatives (5–7), and the elemane 8, have also been isolated, and complete ¹H and ¹³C NMR assignments for these compounds are reported.     

INTERACTION OF VIOLOGEN DYES WITH CHROMATOPHORES AND REACTION-CENTER PREPARATIONS FROM RHODOSPIRILLUM RUBRUM

Abstract —Various low-potential viologen dyes enhance light-induced absorption changes in the near-infrared region (ΔA870) in chromatophore preparations from Rhodospirillum rubrum in the presence of dichlorophenol indophenol and a high concentration of ascorbate (DCPIP + asc). An increase in ΔA870 was also observed in large reaction-center preparations from R. rubrum with viologens in the presence of ascorbate. Our results indicate that E'₀, of the primary electron acceptor X may be as low as -0.37 V, as suggested recently by P. A. Loach (1973, personal communication).     

Vertical excitation as a transient phenomenon

For a particular model with two electronic states, each with two vibrations, the dipole correlation function governing electronic absorption is e ^?iωOt cosγt with spectrum ω ₀±γ. The function starts as e ^?iωOt (γ?ω ₀), with Fourier transform peaking around ω ₀ instead of ω ₀±γ, and this is associated with vertical excitation. After a time t～2/γ the spectrum goes over into the normal one. As a generalization, a procedure is outlined for characterizing the state reached first after interaction with light is initiated. Finally it is suggested that one can understand aspects of internal conversion by analogy with the case of vertical excitation.     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.