Asymmetric synthesis of 4-formyl-1-(ω-haloalkyl)-β-lactams and their transformation to functionalized piperazines and 1,4-diazepanes

Chiral piperazine and 1,4-diazepane annulated β-lactams, prepared from the corresponding (3R,4S)-4-imidoyl-1-(ω-haloalkyl)azetidin-2-ones through reduction with sodium borohydride in ethanol, were transformed into novel methyl (R)-alkoxy-[(S)-piperazin-2-yl]acetates and methyl (R)-alkoxy-[(S)-1,4-diazepan-2-yl]acetates upon treatment with hydrogen chloride in methanol. On the other hand, bromination of (3R,4R)-1-allyl-4-formyl-β-lactams and (3R,4S)-1-allyl-4-imidoyl-β-lactams in dichloromethane, followed by sodium borohydride reduction of the resulting dibrominated azetidin-2-ones in ethanol, did not afford the envisaged bicyclic β-lactams but unexpectedly furnished (3R,4S)-1-(2-bromo-2-propenyl)azetidin-2-ones instead.     

Ultraviolet-B-induced cyclobutane-pyrimidine dimer formation and repair in Arctic marine macrophytes

The significance of ultraviolet-B radiation (UVBR: 280-315 nm)-induced DNA damage as a stress factor for Arctic marine macrophytes was examined in the Kongsfjord (Spitsbergen, 78 degrees 55.5'N, 11 degrees 56.0'E) in summer. UVBR penetration in the water column was monitored as accumulation of cyclobutane-pyrimidine dimers (CPD) in bare DNA. This showed that UVBR transparency of the fjord was variable, with 1% depths ranging between 4 and 8 m. In addition, induction and repair kinetics of CPD were studied in several subtidal macrophytes obtained from the Kongsfjord (5-15 m). Surface exposure experiments demonstrated CPD accumulation in Palmaria palmata, Devaleraea ramentacea, Phycodrys rubens, Coccotylus truncatus and Odonthalia dentata. In artificial light, field collected material of P. palmata, D. ramentacea, P. rubens and Laminaria saccharina showed efficient CPD repair, with only 10% of the artificially induced CPD remaining after 5 h. No significant differences in repair rate were observed among these species. CPD repair was slower or absent in O. dentata, C. truncatus and Monostroma arcticum, indicating that fast repair mechanisms such as photolyase were not continuously expressed in these species. CPD repair rates were not directly related to the vertical distribution of algae in the water column and to the reported UV sensitivity of the examined species. Dosimeter incubations showed that maximal exposure to DNA damaging wavelengths was low for all examined species. Furthermore, most species collected below the 1% depth for DNA damage displayed efficient CPD repair, suggesting that UVBR-induced CPD currently impose a minor threat for mature stages of these species growing in the Kongsfjord, Spitsbergen.     

Pyrolysis-mass spectrometry correlations of crosslink density in natural rubber vulcanizates

A set of twelve natural rubber vulcanizates was analyzed by Curie-point pyrolysis-mass spectrometry (Py-MS). Multivariate analysis successfully correlated the Py-MS data with either total or polysulfidic crosslink density measurements. (Polysulfidic means two or more sulfurs.) The principal correlation observed was an increase in the ratio of monomer to dimer pyrolyzate yield with an increase in crosslink density. The feasibility of using Py-MS for total crosslink density determination has thus been demonstrated. The Py-MS data, however, did not allow us to distinguish different types of crosslinks.     

A solvent-controlled switch of manganese complex assemblies with a beta-diketonate-based ligand

The coordination properties of the new polynucleating ligand H(3)L1 (1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene) with Mn(II/III) are described. Depending on the solvent used, the reaction of H(3)L1 with Mn(OAc)(2) yields either of the two new multinuclear assemblies [Mn(2)(HL1)(2)(py)(4)] (1) and [Mn(3)(HL1)(3)] (2), as revealed by X-ray crystallography. The structure of 2 is remarkable in that it shows a unique asymmetric triple-stranded helicate. Complexes 1 and 2 can be interconverted by controlling the solvent of the reaction system, and therefore, this ensemble constitutes an interesting externally addressable switch. In the presence of Mn(III)/pyridine, partial degradation of H(3)L1 occurs via oxidative cleavage, and the new complex [Mn(2)(L2)(2)(py)(4)] (3) is formed. The crystal structure of this complex has shown the fully deprotonated form of the new donor H(3)L2 (3-(3-oxo-3-phenylpropionyl)-5-methylsalicylic acid). From the same reaction, the Mn(II) complex 1 is also obtained. A rational synthesis of H(3)L2 is reported, and this has been used to prepare 3 in high yields, directly from its components. Variable-temperature magnetic susceptibility (chi(m)) measurements were performed on complexes 1-3 under a magnetic field of 1 kG. The data for each complex were fit to the appropriate chi(m) vs T theoretical equation, respectively. In 1, the Mn(II) ions are uncoupled, with g = 2.01. The data from 2 were fit by assuming the presence of an exchange coupled Mn(II)...Mn(II) pair next to a magnetically isolated Mn(II) center. The fit gave J = -2.75 cm(-1), g(12) = 1.97, and g(3) = 1.92, respectively. In 3, two models fit the experimental data. In the most satisfactory, the Mn(III) ions are coupled antiferromagnetically with J = -1.48 cm(-1) and g = 1.98 and a term for weak ferromagnetic intermolecular exchange is included with zJ' = 0.39 cm(-1). The other model contemplates the presence of two uncoupled zero field split Mn(III) ions.     

Product distribution of peroxynitrite decay as a function of pH, temperature, and concentration.

The decay of peroxynitrite [O=NOO(-), oxoperoxonitrate(1-)] was examined as a function of concentration (0.050-2.5 mM), temperature (5-45 degrees C), and pH (2.2-10.0). Below 5 degrees C and pH 7, little amounts of the decomposition products nitrite and dioxygen are formed, even when the peroxynitrite concentration is high (2.5 mM). Instead, approximately > or =90% isomerizes to nitrate. At higher pH, decomposition increases at the expense of isomerization, up to nearly 80% at pH 10.0 at 5 degrees C and 90% at 45 degrees C. Much less nitrite and dioxygen per peroxynitrite are formed when the peroxynitrite concentration is lower; at 50 microM and pH 10.2, < or =40% decomposes. In contrast to two other reports (Pfeiffer, S.; Gorren, A. C. F.; Schmidt, K.; Werner, E. R.; Hansert, B.; Bohle, D. S.; Mayer, B. J. Biol. Chem. 1997, 272, 3465-3470, and Coddington, J. W.; Hurst, J. K.; Lymar, S. V. J. Am. Chem. Soc. 1999, 121, 2438-2443), we find that the extent of decomposition is dependent on the peroxynitrite concentration.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

Surface complexation of carbonate on goethite: IR spectroscopy, structure and charge distribution

The adsorption of carbonate on goethite has been evaluated, focussing on the relation between the structure of the surface complex and corresponding adsorption characteristics, like pH dependency and proton co-adsorption. The surface structure of adsorbed CO3(-2) has been assessed with (1) a reinterpretation of IR spectroscopy data, (2) determination of the charge distribution within the carbonate complex using surface complexation modeling, and (3) evaluation of the proton co-adsorption of various oxyanions, including carbonate, in relation with structural differences. Carbonate adsorption leads to a degeneration of the nu3 IR vibration. Currently, the magnitude of the Deltanu3 band splitting is used as a criterion for metal coordination. However, the interpretation is not unambiguous, since the magnitude of Deltanu3 is influenced by polarization and additional field effects, due to, e.g., H bonding. Our evaluation shows that for goethite the magnitude of band splitting Deltanu3 falls within the range of values that is representative for bidentate complex formation, despite contrarily assignments made in literature. Determination of the charge distribution (CD), derived by modeling available carbonate adsorption data, shows that a very large part (2/3) of the carbonate charge resides in the surface. Interpretation of this result with a bond valence and a ligand charge analysis strongly favors the bidentate surface complexation option for adsorbed carbonate. This option is also supported by the proton co-adsorption of carbonate. The H co-adsorption is very high, which corresponds closely to an oxyanion surface complex in which 2/3 of the ligands are common with the surface. The high H co-adsorption is in conflict with the monodentate option for adsorbed CO3(-2). The study shows that the H co-adsorption of CO3(-2) is almost equal to the experimental H co-adsorption obtained for SeO3(-2) adsorption, which can be rationalized supposing for both XO3(-2) complexes the same ligand distribution in the interface, i.e., bidentate complex formation.     

(Z)-1-[2-(Triarylstannyl)vinyl]-1-cycloheptanols: Synthesis, characterization, halodemetallation and crystal structures

The synthesis and characterization by ¹H, ¹³C, ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy of (Z)-1-[2-(triphenylstannyl)vinyl]-1-cycloheptanol,

Full-size image

(1), and (Z)-1-[2-tri-p-tolylstannyl)vinyl-1-cycloheptanol,

Full-size image

(2), are described, together with their halodemetallation by I₂, Br₂ and ICIl to yield derivatives of the types

Full-size image

(Ar = phenyl or p-tolyl, N = 1, 2; X = I, Br, Cl, respectively). The solid-state structures of four compounds have been determined by X-ray diffraction analysis. In the crystals of

Full-size image

(1) and

Full-size image

(2) the Sn atom has a tetrahedral geometry distorted towards trigonal bipyramid as a consequence of a close intramolecular contact with the hydroxyl O(1) atom of 2.742(3) Å and 2.768(3) Å, respectively. A trigonal bipyramidal geometry is found in

Full-size image

(12) and

Full-size image

(4), in which significant Sn---O(1) interactions are noted [2.437(8) Å and 2.407(8) Å, respectively].     

Stabilization of protein-loaded starch microgel by polyelectrolytes

The interaction of biocompatible polyelectrolytes (chargeable poly(amino acids)) with oxidized starch microgel particles has been studied. The aim was to form a polyelectrolyte complex layer around the outer shell of microgel particles filled with functional ingredients to slow down the release of the ingredients from the gel and make this process less sensitive to salt. First, the distribution of positively charged poly(l-lysine) (PLL) of two different molecular weights ("small", 15-30 kDa, and "large", 30-70 kDa) in the negatively charged gel particles was measured. The small PLL distributes homogeneously throughout the gel particles, but the large PLL forms a shell; i.e., its concentration at the outer layer of the particles was found to be much higher than in their core. This shell formation does not occur at a relatively high salt concentration (0.07 M). The large PLL was selected for further study. It was found that upon addition of PLL to lysozyme-loaded gel particles the protein is exchanged by PLL. The exchange rate increases with increasing pH, in line with the increasing electrostatic attraction between the gel and the polyelectrolyte. Therefore, it was decided to use also a negatively charged poly(amino acid), poly(L-glutamic acid) (PGA), to form together with PLL a stable polyelectrolyte complex shell around the gel particles. This approach turned out to be successful, and the PLL/PGA complex layer effectively slows down the release of lysozyme from the microgel particles at 0.05 M salt. In addition, it was found that the PLL/PGA layer protects the gel particle from degradation by α-amylase.