A comparison of T2*-weighted magnitude and phase imaging for measuring the arterial input function in the rat aorta following intravenous injection of gadolinium contrast agent

The arterial input function (AIF) is important for quantitative MR imaging perfusion experiments employing Gd contrast agents. This study compared the accuracy of T(2)*-weighted magnitude and phase imaging for noninvasive measurement of the AIF in the rat aorta. Twenty-eight in vivo experiments were performed involving simultaneous arterial blood sampling and MR imaging following Gd injection. In vitro experiments were also performed to confirm the in vivo results. At 1.89 T and TE=3 ms, the relationship between changes in 1/T(2)* in blood (estimated from MR signal magnitude) and Gd concentration ([Gd]) was measured to be approximately 19 s(-1) mM(-1), while that between phase and [Gd] was approximately 0.19 rad mM(-1). Both of these values are consistent with previously published results. The in vivo phase data had approximately half as much scatter with respect to [Gd] than the in vivo magnitude data (r(2)=.34 vs. r(2)=.17, respectively). This is likely due to the fact that the estimated change in 1/T(2)* is more sensitive than the phase to a variety of factors such as partial volume effects and T(1) weighting. Therefore, this study indicates that phase imaging may be a preferred method for measuring the AIF in the rat aorta compared to T(2)*-weighted magnitude imaging.     

Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal–chelate complex by the formation of bidentate ligand with Zn²⁺ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.     

Atomic force microscopy studies of the KF (100) surface: formation of water-rich surface phases in moist N,N-dimethylformamide

A water rich surface phase is observed in the system KF-DMF-H2O by atomic force microscopy; the effects on surface morphology and likely implications for halogen exchange reactions using KF are discussed.     

Vibrational relaxation and collision-induced dissociation of xenon fluoride by neon

Rate coefficients were calculated for vibrational relaxation and collision-induced dissociation of ground state xenon fluoride in neon at temperatures between 300 and 1000 K for each of nine vibrational levels. These coefficients were calculated using a pairwise additive potential energy surface, which consists of a Morse function for the XeF interaction and Lennard–Jones functions for the NeXe and NeF interactions. Rate coefficients are provided for both temperature and v- dependences. The vibrational relaxation and dissociation processes occur by multiquanta transitions. Dissociation can take place from all v-levels provided that the internal energy of the XeF molecule is close to the rotationless dissociation limit. The order of increase effectiveness of the various forms of energy in promoting dissociation in XeF was found to be translation–rotation-vibration. At room temperature, neon atoms were found to be more efficient than helium atoms in the dissociation processes; helium atoms were found to be more efficient than neon atoms in the vibrational relaxation of XeF. Strong vibration–rotation coupling in both vibrational relaxation and in the dissociation processes is demonstrated.     

The crystal structure of a Di(tetramethylammonium)-bis[R,R-tartrato(2-)]-cis-dioxomolybdate(VI), (NMe4)2[MoO2(C4H4O6)2] · EtOH · 1.5 H2O,with comments on tartrate coordination

Summary In the salt (NMe₄[MoO₂(H₂tart)₂] · EtOH · 1.5 H₂O (H₄tart = R,R-(+)-tartaric acid) the tartrato-ligands are linked to molybdenum through a carboxyl oxygen and the vicinal deprotonated hydroxyl oxygen atom, with carboxyl oxygentrans to terminal oxygen of the MoO₂ cis-dioxo core. The configuration about Mo is A. The C-C-C-C torsion angles of the ligands are almost 180°. This enables inter-ligand H-bonding from the uncoordinated hydroxyl groups. The five skeletal atoms from the uncoordinated section of a ligand are nearly co-planar. The probable strong preference fortrans coordination of carboxyl must limit the range of dissolved molybdenum(VI)-tartrate species.     

Enhanced Methylarginine Characterization by Post-Translational Modification-Specific Targeted Data Acquisition and Electron-Transfer Dissociation Mass Spectrometry

When localizing protein post-translational modifications (PTMs) using liquid-chromatography (LC)-tandem mass spectrometry (MS/MS), existing implementations are limited by inefficient selection of PTM-carrying peptides for MS/MS, particularly when PTM site occupancy is sub-stoichiometric. The present contribution describes a method by which peptides carrying specific PTMs of interest-in this study, methylarginines-may be selectively targeted for MS/MS: peptide features are extracted from high mass accuracy single-stage MS data, searched against theoretical PTM-carrying peptide masses, and matching features are subjected to targeted data acquisition LC-MS/MS. Using trypsin digested Saccharomyces cerevisiae Npl3, in which evidence is presented for 18 methylarginine sites-17 of which fall within a glycine-arginine-rich (GAR) domain spanning <120 amino acids-it is shown that this approach outperforms conventional data dependent acquisition (DDA): when applied to a complex protein mixture featuring in vivo methylated Npl3, 95% more (P=0.030) methylarginine-carrying peptides are selected for MS/MS than DDA, leading to an 86% increase (P=0.044) in the number of methylated peptides producing Mascot ion scores ≥20 following electron-transfer dissociation (ETD). Notably, significantly more low abundance arginine methylated peptides (maximum ion intensities <6×10(4) cps) are selected for MS/MS using this approach relative to DDA (50% more in a digest of purified in vitro methylated Npl3). It is also demonstrated that relative to collision-induced dissociation (CID), ETD facilitates a 586% increase (P=0.016) in average Mascot ion scores of methylarginine-carrying peptides. The present PTM-specific targeted data acquisition approach, though described using methylarginine, is applicable to any ionizable PTM of known mass.     

Distribution of radionuclides in potato tubers: Implications for dose assessments

A study of the distribution of¹³⁷Cs,⁹⁰Sr, Pu and Am in potato tubers has been carried out. Cesium-137 was essentially uniformly distributed throughout the tuber, whereas up to about 50% of the⁹⁰Sr activity was found in the peel. Results for actinides indicated that most of the activity would be found in the peel and of this more than half would be located in the thin outemost skin. When account is taken of the form in which potatoes are consumed in the UK, the values of soil-plant transfer factors currently assumed in the NRPB model FARMLAND are reasonable for general assessment purposes.     

Method development for compositional analysis of low molecular weight poly(vinyl acetate) by matrix-assisted/laser desorption-mass spectrometry and its application to analysis of chewing gum

The influence of the sample preparation parameters (the choice of the solvent and of the matrix:analyte ratio) was investigated and optimal conditions were established for MALDI mass spectrometry analysis of the pristine low molecular weight polyvinyl acetate (PVAc). It was demonstrated that comparison of polymer’s and solvent’s Hansen solubility parameters could be used as a guide when choosing the solvent for MALDI sample preparation. The highest intensity PVAc signals were obtained when ethyl acetate was used as a solvent along with the lowest matrix–analyte ratio (2,5-dihydroxybenzoic acid was used as a matrix in all experiments). The structure of the PVAc was established with high accuracy using the matrix-assisted laser desorption/ionization-Fourier transform mass spectrometry (MALDI-FTMS) analysis. It was demonstrated that PVAc undergoes unimolecular decomposition by losing acetic acid molecules from its backbone under the conditions of FTMS measurements. Number and weight average molecular weights as well as polydispersity indices were determined with both MALDI-TOF and MALDI-FTMS methods. The sample preparation protocol developed was applied to the analysis of a chewing gum and the molecular weight and structure of the polyvinyl acetate present in the sample were established. Thus, it was shown that optimized MALDI mass spectrometry could be used successfully for characterization of polyvinyl acetate in commercially available chewing gum.     

Growth mechanisms involved in the synthesis of smooth and microtextured films by acetylene magnetron discharges

The growth of hydrogenated amorphous carbons (a-C:H) produced by continuous or pulsed discharges of acetylene (C(2)H(2)) in an unbalanced magnetron setup was investigated. At 5 × 10(-3) Torr, only smooth films are obtained, whereas at 5 × 10(-1) Torr using a pulsed discharge some microtextured films are formed if the duty cycle is low. The morphology of these microtextured films consists of nanoparticles, filamentary particles, and particular agglomerates ("microflowers"). This paper presents a study of acetylene gas phase polymerization by mass spectrometry, and a detailed analysis of bulk structure of films by combining three techniques which include IR spectroscopy, Raman spectroscopy, and laser desorption/ionization Fourier transform mass spectrometry (LDI-FTMS). Finally, based on the study of gas phase and film structure, we propose a model for the growth of both smooth and microtextured films.     

Subitising activity relative to units construction: a case study

Subitising, a quick apprehension of the numerosity of a small set of items, has been found to change from an individual's reliance on perceptual to conceptual processes. In this study, we utilised a constructivist teaching experiment methodology to investigate how the subitising activity of one preschool student, Amy, related to her construction of prenumerical units. Subitising and counting tasks were designed to assess and perturb Amy's thinking relative to her construction of units, and to observe changes in Amy's activity associated with the different tasks. Findings indicate that as Amy's subitising activity changed from perceptual to conceptual, she constructed subitised motor units and subitised figurative units. Implications of this study suggest that the construction of subitised units may support young children's later development of arithmetic units.