Simultaneous quantification of terpenelactones and flavonol aglycones in hydrolyzed ginkgo biloba extract by liquid chromatography with inline ultraviolet and evaporative light scattering detection

We report here a liquid chromatography (LC) method with inline ultraviolet/evaporative light scattering (UV/ELS) detection for the simultaneous quantification of the terpenelactones and flavonol aglycones in a single sample of hydrolyzed Ginkgo biloba extract (GBE). The sample is hydrolyzed by a rapid and convenient oven heating method for 1 h at 90 degrees C with 10% hydrochloric acid. The 1 h hydrolysis was found to be equivalent to the 2.25 h reflux treatment for dry powder extract, where total flavonol glycosides were 28.4 and 28.1%, respectively. Acceptable precision was achieved for total terpenelactones [relative standard deviation (RSD) = 4.8%] by ELS detection, and total flavonol aglycones (RSD = 2.3%) by UV detection. The analytical range was 1.5 to 7.3% (w/w) for the individual terpenelactones (ELS) and 2.5 to 15.0% (w/w) for the individual glycosides (UV) calculated from the aglycones quercetin, kaempferol, and isorhamnetin. This improved method allows for the first time high throughput sample preparation coupled with the quantification of the predominant compounds generally used for quality control of GBE in a single assay.     

Synthesis and Crystal Structure of Bis(tetraethylammonium) Octabromo‐triselenate(II)‐{dibromodiselenate(I)}, [NEt4]2[Se3Br8(Se2Br2)], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The brown crystals of [NEt₄]₂[Se₃Br₈(Se₂Br₂)] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraethylammonium bromide. The crystal structure of 1 has been determined by the X‐ray methods and refined to R = 0.0308 for 10433 reflections. The crystals are monoclinic, space group P2₁ with Z = 2 and a = 12.0393(3) Å, b = 11.8746(3) Å, c = 13.1946(3) Å, β = 96.561(1)° (123 K). In the solid state structure the anion of 1 is built up of Se₃Br₈ unit which consists of a triangular arrangement of three planar SeBr₄ units sharing a common edge through two μ₃‐bridging Br atoms, and one Se₂Br₂ molecule which is linked to one of μ₃‐bridging Br atoms. The three Se^II atoms form a triangle which is almost perpendicular to the planes given by three SeBr₄ moieties. The contact between the μ₃Br and the Se^I atom of the Se₂Br₂ molecule is 3.1711(8) Å and can be interpreted as a bond of the donor‐acceptor type with the μ₃Br as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II‐Br and μ₃Br‐Se^II bond lengths are in the ranges 2.3537(7)–2.4737(7) Å and 2.7628(7)–3.1701(7) Å, respectively. The bond lengths in coordinated Se₂Br₂ molecule are: Se^I‐Se^I = 2.2636(9) Å, Se^I‐Br = 2.3387(11) and 2.3936(8) Å.     

Excess molar quantities of (a halogenated n-alkane + an n-alkane) A comparative study of mixtures containing either 1-chlorobutane or 1,4-dichlorobutane

Excess molar volumes V_m^E at 298.15 K were obtained, as a function of mole fraction x, for series I: {x1-C₄H₉Cl + (1 ? x)n-C_lH_{2l + 2}}, and II: {x1,4-C₄H₈Cl₂ + (1 ? x)n-C_lH_{2l + 2}}, for l = 7, 10, and 14. 10, and 14. The instrument used was a vibrating-tube densimeter. For the same mixtures at the same temperature, a Picker flow calorimeter was used to measure excess molar heat capacities C_{p, m}^E at constant pressure. V_m^E is positive for all mixtures in series I: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.277 for l = 7, 0.388 for l = 10, and 0.411 for l = 14. For series II, V_m^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆} is small and S-shaped, the maximum being situated at x_max = 0.178 with V_m^E(x_max)/(cm³ · mvl^?1) = 0.095, and the minimum is at x_min = 0.772 with V_m^E(x_min)/(cm³ · mol^?1) = ?0.087. The excess volumes of the other mixtures are all positive and fairly large: at x = 0.5, V_m^E/(cm³ · mol^?1) is 0.458 for l = 10, and 0.771 for l = 14. The C_{p, m}^Es of series I are all negative and |C_{p, m}^E| increases with increasing l: at x = 0.5, C_{p, m}^E/(J · K^?1 · mol^?1) is ?0.56 for l = 7, ?1.39 for l = 10, and ?3.12 for l = 14. Two minima are observed for C_{p, m}^E of {x1,4-C₄H₈Cl₂ + (1 ? x)n-C₇H₁₆}. The more prominent minimum is situated at x′_min = 0.184 with C_{p, m}^E(x′_min)/(J · K^?1 · mol^?1) = ?0.62, and the less prominent at x″_min = 0.703 with C_{p, m}^E(x″_min)/(J · K^?1 · mol^?1) = ?0.29. Each of the remaining two mixtures (l = 10 and 14) has a pronounced minimum at low mole fraction (x_min = 0.222 and 0.312, respectively) and a broad shoulder around x = 0.7.     

Development of an ethanol-selective optode membrane based on a reversible chemical recognition process

Lipophilic trifluoroacetophenone derivatives incorporated in plasticized PVC membranes are able to selectively extract water and alcohols from the sample solution into the organic membrane phase, reversibly forming hydrates and hemi-acetals, respectively. Since this is accompanied by a change in the absorption spectrum of the acetophenone isologue, the chemical recognition process can directly be translated into an optical signal. With N-acetyl-N-dodecyl-4-trifluoroacetylaniline (ETH 6022) as the electrically neutral, lipophilized carrier ethanol can be determined from 0.5 to 35% (v/v) in aqueous solutions. The calibration curve for different ethanol-water mixtures shows a good correlation with the mathematically derived formalism and thus confirms the theoretically expected behavior. Besides high reproducibility of the optical signals, very short response times of less than 30 s were realized. The optode membrane presented exhibits a preference for ethanol compared to water by a factor greater than 11. The selectivities for several primary alcohols, such as methanol, ethanol, 1-propanol and 1-n-butanol, are comparable, but isopropanol and tert.-butanol are rejected by a factor of about 10. The alcohol concentration in different beverages was determined to evaluate the reliability of the system. The values obtained for wine, beer and different spirits show an excellent correlation with those obtained by a conventional approach involving distillation and density measurements. A residual standard deviation of ± 0.27% (v/v) over the 0.7–40% (v/v) range was found.     

Massenspektrometrische Untersuchungen an Organophosphorverbindungen. II—Elektronenstoßinduzierte Fragmentierungen von Tetraorganodiphosphandisulfiden

The behaviour under electron impact (70 eV) which includes some rearrangement processes of some tetraorganodiphosphanedisulfides R₂P(S)-P(S)R₂ (R ? CH₃, C₂H₅, n-C₃H₇, n-C₄H₉, C₃H₅, C₆H₅) and CH₃RP(S)–P(S)CH₃R (R ? C₂H₅, n-C₃H₇, n-C₄H₉, C₆H₅, C₆H₅, C₆H₅,CH₂) is reported and discussed. Fragmentation patterns which are consistent with direct analysis of daughter ions and defocusing metastable spectra are given. The atomic composition of many of the fragment ions was determined by precise mass measurements. In contrast to compounds R₃P(S) loss of sulphur is not a common process here. The first step in the fragmentation of these compounds is cleavage of one P–C bond and loss of a substituent R?. The second step is elimination of RPS leading to [R₂PS]⁺ from which the base peaks in nearly all the spectra arise. The phenyl substituted compounds give spectra with very abundant [(C₆H₅)₃P]^+. and [(C₆H₅)₂CH₃P]^+. ions respectively, resulting from [M]^+. by migration of C₆H₅. Rearrangement of [M]^+. to a 4-membered P-S ring system prior to fragmentation is suggested.     

MS/MS in structural analysis of an oviposition-deterring pheromone

A recently characterized oviposition-deterring pheromone (ODP, structure 1) of the European cherry fruit fly was used as a test case for probing the potential of tandem mass spectrometry (MS/MS) in structure elucidation as a stand-alone technique. The glycolipid-taurinate 1 was subjected to MS/MS analyses under a variety of conditions with and without preceding chemical degradation. Acidic methanolysis of 1 and subsequent in-batch derivatization (trideuterioacetylation) yielded methyl 2,3,4,6-tetrakis-O-trideuterioacetyl-glucopyranoside (2), methyl 8,15-bis-trideuterioacetoxy-palmitate (3), and taurine (4) as suitable target compounds for direct mixture analysis.Low energy collision induced dissociation (CID) on selected precursor ions (MS/MS on [M + H – CH₃OH]⁺ and [M + H]⁺ produced by fast atom bombardment (FAB)) allowed direct identification of 2 and 4, respectively, by comparison with appropriate reference ions. In the case of 3, low energy CID (desorption chemical ionization (DCI) instead of FAB, MS/MS on [M + H]⁺) permitted deduction of gross molecular structure, but failed to provide positional detail. In sharp contrast,high energy CID of trideuterioacetylated intact 1 (FAB-MS/MS on [M – H]^– ions of la) clearly revealed a linear 8,15-hydroxylated palmitic acid backbone. Less certain was assignment of 15-O-glucosylation by this approach.     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

Cation-Response Mechanism of Neutral Carrier Based Ion-Selective Electrode Membranes

Results of voltammetric, potentiometric, chronoamperometric, ion transport, and extraction studies on neutral carrier based, plasticized poly(vinyl chloride) membranes are summarized. They unambiguously confirm that such bulk membranes dispose of immobile anionic sites. These fixed sites lead to a Donnan exclusion of other anions from the membrane and thus to a permselectivity for cations. The results are in perfect agreement with the predictions of earlier membrane models. A rigorous Poisson-Boltzmann analysis of macroscopic liquid membranes clearly indicates that space-charge at the membrane/solution interfaces does not influence the electrochemical properties and the ion-selectivity behavior at steady state.     

Proton conductivity in the layer compound H3OUO2AsO4·3H2O (HU As)

The proton conductivity in tetragonal H₃OUO₂AsO₄·(3-)H₂O has been measured above the transition temperature at 299 K. The conductivity, calorimetric and spectroscopic data depend on the water content and the transition is suggested to be a peritectic reaction setting free a small amount of solution, which stays strongly adsorbed between the layers of the structure and gives rise to the high conductivity.     

The effect of pressure on hydrogen transfer reactions with quinones

The effect of pressure on the oxidation of hydroarenes 3-9 with 2,3-dichloro-5,6-dicyano-1,4-quinone (DDQ; 1 a) or o-chloranil (10), leading to the corresponding arenes, has been investigated. The activation volumes were determined from the pressure dependence of the rate constants of these reactions monitored by on-line UV/Vis spectroscopic measurements in an optical high-pressure cell (up to 3500 bar). The finding that they are highly negative and only moderately dependent on the solvent polarity (DeltaV( not equal ) = -13 to -25 in MTBE and -15 to -29 cm(3) mol(-1) in MeCN/AcOEt, 1:1) rules out the formation of ionic species in the rate-determining step and is good evidence for a hydrogen atom transfer mechanism leading to a pair of radicals in the rate-determining step, as was also suggested by kinetic measurements, studies of kinetic isotope effects, and spin-trapping experiments. The strong pressure dependence of the kinetic deuterium isotope effect for the reaction of 9,10-dihydroanthracene 5/5-9,9,10,10-D(4) with DDQ (1 a) can be attributed to a tunneling component in the hydrogen transfer. In the case of formal 1,3-dienes and enes possessing two vicinal C--H bonds, which have to be cleaved during the dehydrogenation, a pericyclic hydrogen transfer has to considered as one mechanistic alternative. The comparison of the kinetic deuterium isotope effects determined for the oxidation of tetralin 9/9-1,1,4,4-D(4)/9-2,2,3,3-D(4)/9-D(12) either with DDQ (1 a) or with thymoquinone 1 c indicates that the reaction with DDQ (1 a) proceeds in a stepwise manner through hydrogen atom transfer, analogously to the oxidations of 1,4-dihydroarenes, whereas the reaction with thymoquinone 1 c is concerted, following the course of a pericyclic hydrogen transfer. The difference in the mechanistic courses of these two reactions may be explained by the effect of the CN and Cl substituents in 1 a, which stabilize a radical intermediate better than the alkyl groups in 1 c. The mechanistic conclusions are substantiated by DFT calculations.