Dynamic Fourier transform infrared spectroscopy in polymer research

The rapid-scanning capability of FTIR instrumentation has revitalized the field of vibrational spectroscopy in polymer research and will be discussed with reference to the study of polyurethane kinetics, the temperature dependence of hydrogen bonding in polyamide 6 and strain-induced crystallization in a polydimethylsiloxane elastomer.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Biosynthesis of cis-Jasmone: a pathway for the inactivation and the disposal of the plant stress hormone jasmonic acid to the gas phase?

Flowers of Jasminum rincospernum convert deuterium-labeled jasmonic acid [²H₅]- 4a and methyl 1,2-didehy-drojasmonate [²H₄]- 8 into labeled cis-jasmone [²H₄]- 1. The labeling pattern of the resulting cis-jasmone ( 1 ) is consistent with a Grob fragmentation of the didehydrojasmonic acid 8a by decarboxylation after protonation of the keto group. The pathway is also operative in leaves of several higher plants, including mono- and dicotyledonous specimens. In Lima beans besides cis-jasmone ( 1 ) an equimolar mixture of trans- and cis-isomers of methyl jasmonate ( 4 ) and epi- 4 , is emitted after treatment with Jasmonic acid ( 4a ). The relative ratio of 1 and 4 /epi- 4 is critically dependent on the concentration of the administered jasmonic acid ( 4a ) and the ambient temperature of the plant. Unlike 4a , the 1,2-didehydrojasmonic acid ( 8a ) is not able to induce volatile biosynthesis. Therefore, the transformation of 4a via 8 a into 1 appears to have a special importance for the irreversible inactivation and disposal of the plant stress hormone jasmonic acid to the gas phase and may serve, besides other modes of inactivation, as a shunt in case of high internal of the stress hormone 4a. The conversion of the biologically active jasmonic acid ( 4a ) into the inactive and volatile cis-jasmone (1) is the first example of a disposal of an inactive metabolite of a phytohormone to the gas phase as an infinite sink.     

Detection of adsorption of Ru(II) and Os(II) polypyridyl complexes on gold and silver nanoparticles by single-photon counting emission measurements

The present study describes a new application of ruthenium(II) tris(bipyridine) (Ru(bpy)3(2+)) and osmium(II) tris(bipyridine) (Os(bpy)3(2+)) as phosphorescent labels for the quantification of surface binding of molecules to gold and silver nanoparticles. The fraction of Ru(bpy)3(2+) and Os(bpy)3(2+) that is in solution can be distinguished from the surface-bound fraction by the relative lifetimes and integrated emission yields as determined by time-correlated single-photon counting (TCSPC) spectroscopy. Complementary steady-state measurements were carried out to confirm surface attachment of the phosphorescent label molecules. Although the emission of solutions of Ru(bpy)3(2+) and Os(bpy)3(2+) is quenched proportional to the concentration of 10 nm Au or 20 nm Ag nanoparticles, the quenching is static and not diffusional quenching observed in Stern-Volmer plots. The results demonstrate that time-resolved spectroscopy provides a rapid method for the measurement of surface binding of labeled molecules on metallic nanoparticles. While steady-state measurements require the preparation of a series of samples with varying quencher concentrations and a reference, the method described herein requires a single sample plus reference. The mechanism for phosphorescence quenching on Au and Ag nanoparticles is discussed in terms of energy and electron transfer theories.     

Molekül- und Kristallstruktur des 1,4-Bis[tris(tetrahydrofuran)lithium]-octaphenyltetrasilans

Molecular and Crystal Structure of 1,4-Bis[tris(tetrahydrofuran)lithium]-octaphenyltetrasilane 1,4-Dilithium-octaphenyltetrasilane prepared from octaphenyl-cyclo-tetrasilane and lithium in tetrahydrofuran (THF) [4], can be isolated from tetrahydrofuran/n-pentane as an adduct with six molecules of tetrahydrofuran per formula unit. The orange-red compound crystallizes in the triclinic space group P1 {a = 1159.6(3); b = 1268.4(2); c = 1367.8(3) pm; α = 92,23(2)° β = 113.79(2)° γ = 111.62(2)° at ?5 ± 3°C; Z = 1}. An x-ray structure determination (R_w = 0.046) shows the existence of a centrosymmetric molecule with an extended planar Li? Si₄? Li unit; either lithium atom is bound to silicon and to the oxygen atoms of three molecules of tetrahydrofuran. Characteristic bond lengths and angles are: Li? Si 271; Si? Si 241 and 243; Si? C 190 to 192 pm; Li? Si? Si 126°; Si? Si? Si 127°. ²⁹Si and ⁷Li n.m.r. measurements at low temperatures indicate the presence of three different adducts.     

Functional organization of the outer membrane of escherichia coli: phage and colicin receptors as components of iron uptake systems.

The functional interaction of outer membrane proteins of E. coli can be studied using phage and colicin receptors which are essential components of penetration systems. The uptake of ferric iron in the form of the ferrichrome complex requires the ton A and ton B functions in the outer membrane of E. coli. The ton A gene product is the receptor protein for phage T5 and is required together with the ton B function by the phages T1 and ?80 to infect cells and by colicin M and the antibiotic albomycin, a structural analogue of ferrichrome, to kill cells. The ton B function is necessary for the uptake of ferric iron complexed by citrate. Iron complexed by enterochelin is only transported in the presence of the ton B and feu functions. Cells which have lost the feu function are resistant to the colicins B, I or V while ton B mutants are resistant to all 3 colicins. The interaction of the ton A, ton B, and feu functions apparently permits quite different "substrates" to overcome the permeability barrier of the outer membrane. It was shown for ferrichrome dependent iron uptake that the complexing agent was not altered and could be used repeatedly. Only very low amounts of 3H-labeled ferrichrome were found in the cell. It is possible that the iron is mobilized in the membrane and that desferri-ferrichrome is released into the medium without having entered the cytoplasm. Growth on ferrichrome as the sole iron source was used to select revertants of T5 resistant ton A mutants. All revertants exhibited wild-type properties with the exception of partial revertants. In these 4 strains, as in the ton A mutants, the ton A protein was not detectable by SDS polyacrylamide gel electrophoreses of outer membranes. Albomycin resistant mutants were selected and shown to fall into 5 categories: 1) ton A; 2) ton B mutants; 3) mutants with no iron transport defects and normal ton A/ton B functions, which might be target site mutants; 4) mutants which were deficient in ferrichrome-mediated iron uptake but had normal ton A/ton B functions. We tentatively consider that the defect might be located in the active transport system of the cytoplasmic membrane; 5) a variety of mutants with the following general properties: most of them were resistant to colicin M, transported iron poorly, and, like ton B mutants, contained additional proteins in the outer membrane. The outer membrane protein patterns of wild-type and ton B mutant strains were compared by slab gel electrophoresis in an attempt to identify a ton B protein. It was observed that under most growth conditions, ton B mutants overproduced 3 proteins of molecular weights 74,000-83,000. In extracted, iron-deficient medium, both the wild-type and ton B mutant strains had similar large amounts of these proteins in their outer membranes. The appearance of these proteins was suppressed by excess iron in both wild-type and mutant. From this evidence it is apparent that the proteins appear as a response to low intracellular iron rather than being controlled by the ton B gene...     

Adaptive approach for nonlinear sensitivity analysis of reaction kinetics

We present a unified approach for linear and nonlinear sensitivity analysis for models of reaction kinetics that are stated in terms of systems of ordinary differential equations (ODEs). The approach is based on the reformulation of the ODE problem as a density transport problem described by a Fokker-Planck equation. The resulting multidimensional partial differential equation is herein solved by extending the TRAIL algorithm originally introduced by Horenko and Weiser in the context of molecular dynamics (J. Comp. Chem. 2003, 24, 1921) and discussed it in comparison with Monte Carlo techniques. The extended TRAIL approach is fully adaptive and easily allows to study the influence of nonlinear dynamical effects. We illustrate the scheme in application to an enzyme-substrate model problem for sensitivity analysis w.r.t. to initial concentrations and parameter values.     

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.