Phase transition induced improvement in H2 desorption kinetics: the case of the high-temperature form of Y(BH4)3

The high-temperature (HT) phase of Y(BH(4))(3) has been prepared by heating of the as mechanochemically synthesised low-temperature (LT) phase of Y(BH(4))(3) to 194-216 °C and subsequent rapid cooling to ambient temperature. Although the differences in the crystal structure and vibrational spectra for these closely-related polymorphs are rather small, yet the NMR MAS (1)H and CP MAS (89)Y spectra reveal clear differences in the chemical shifts for both nuclei. The thermal decomposition process of both forms differs noticeably below 260 °C, decomposition being faster and more facile for the HT phase. The activation energy for thermal decomposition, calculated according to the Kissinger equation, is nearly three times lower for the HT than for the LT polymorph for the first step of the thermal decomposition signalling giant improvement of kinetics of H(2) desorption.     

Supravital fluorometric apoptosis detection in a single mouse embryo using lab-on-a-chip

Detection of apoptosis is one of the main criteria of preimplantation embryo growth potential assessment. Recent developments in lab-on-a-chip techniques has led to apoptosis detection and monitoring on a single cell or embryo level. However, single embryo apoptosis detection without a change in embryo developmental competence and post-examination "recovery" still remains a challenge. In this paper we present a lab-on-a-chip, co-working with miniaturized optical instrumentation, which allows supravital examination of single embryos for the presence of apoptotic blastomers with full after lab-on-a-chip study "recovery" and maintenance of their further developmental capacity.     

Multiresidue determination of 160 pesticides in wines employing mixed-mode dispersive-solid phase extraction and gas chromatography-tandem mass spectrometry

A new multiresidue method for the efficient screening, identification and quantification of over 160 pesticides belonging to different chemical classes in red, rose and white wines have been developed. The analysis was based on gas chromatographic-tandem quadrupole mass spectrometric determination (GC-QqQ-MS/MS). An optimization strategy involved the selection of buffering conditions and sorbents for dispersive-solid phase extraction (dispersive-SPE) in order to achieve acceptably high recoveries and reduce co-extractives in the final extracts. As a result, the optimized procedure allowed us to obtain consistent recoveries of the target pesticides including problematic ones such as captan, chlorothalonil, dichlofluanid, folpet and tolylfluanid. The attained recoveries were typically between 80 and 110% (89% on average) with RSD values typically lower than 10% (8% on average) at three spiking levels of 0.01, 0.05 and 0.2 mg kg⁻¹. Linearity was studied in the range between 0.005 and 0.2 mg kg⁻¹ using pesticide standards prepared both in pure solvent and in the presence of matrix, showing coefficients of determination (R²) higher than 0.99 for all the pesticides except for desmedipham, thiabendazole and thiamethoxam in pure solvent. The study of the ratio of the slopes obtained in solvent and in matrix provided information about the matrix effects, which was <10%, 10-20% and >20% for 33, 36 and 31% of the studied pesticides, respectively. To improve accuracy, matrix matched standards were always used for calculation of the quantification results. The expanded uncertainties were estimated by using a “top-down” approach as being 17% on average (coverage factor k = 2, confidence level 95%). Finally, the method was used with success to detect and quantify pesticide residues in commercial wines.     

Preparation and Characterization of Carbon Nano‐Onion/PEDOT:PSS Composites

Composites of unmodified or oxidized carbon nano‐onions (CNOs/ox‐CNOs) with poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are prepared with different compositions. By varying the ratio of PEDOT:PSS relative to CNOs, CNO/PEDOT:PSS composites with various PEDOT:PSS loadings are obtained and the corresponding film properties are studied as a function of the polymer. X‐ray photoelectron spectroscopy characterization is performed for pristine and ox‐CNO samples. The composites are characterized by scanning and transmission electron microscopy and differential scanning calorimetry studies. The electrochemical properties of the nanocomposites are determined and compared. Doping the composites with carbon nanostructures significantly increases their mechanical and electrochemical stabilities. A comparison of the results shows that CNOs dispersed in the polymer matrices increase the capacitance of the CNO/PEDOT:PSS and ox‐CNO/PEDOT:PSS composites.     

Capillary electrophoresis in the diagnosis of surgical site infections

A surgical site infection (SSI) is an infection that occurs after surgery in the part of the body where the surgery took place. An SSI may range from a spontaneously limited wound discharge within 7–10 days of an operation to a life‐threatening postoperative complication, such as a sternal infection after open heart surgery. Most SSIs are caused by contamination of an incision with microorganisms from the patient's own body during surgery. From the analytical point of view, the complex nature of these samples as well as the low concentrations of analytes require a system with high sensitivity and efficiency. Such situation requires a technique such as CE, which is a powerful and versatile separation technique that promises to rival HPLC when applied to the separation of both charged and neutral species. During the study, it has been demonstrated that CZE identifies characteristics of such groups of pathogens such as bacteria Gram (+) and different species of bacteria Gram (?), and also develops weekly individual profiles for patients after application of antibiotics. This was done in order to show the impact of antibiotic therapy in change “numbers” of bacteria present in the wound after surgery. The method proved to be the ideal straight specificity in the case of Escherichia coli (100%). Finally, analysis of the spectra and the second derivatives of the UV‐Vis spectra confirmed the similarity in the profiles and showed that the CZE is a great method for fast screening test in bacterial infection.     

Efficient One‐Pot Synthesis of a Densely Functionalized Tetrahydropyridine in the Presence of [1,1′‐Binaphthalene]‐2,2′‐diol/Indium(III) Chloride (binol/InCl3) or Simple Brønsted Acids as Catalysts

The highly functionalized tetrahydropyridine 4 was obtained in an indium(III) chloride catalyzed multi‐component reaction from benzaldehyde, 4‐methoxyaniline, and ethyl acetoacetate (=ethyl 3‐oxobutanoate) in the presence of [1,1′‐binaphthalene]‐2,2′‐diol (binol). It was found that binol played a beneficial role in this reaction, allowing a substantial decrease of the amount of indium salt. Also, simple organic Brønsted acids may serve as effective organocatalysts in this process.     

Usefulness of chaotropic salt additive in RP‐HPLC of organic nonionized compounds

New synthesized 1,4‐disubstituted thiosemicarbazide derivatives were analyzed in the RP system, modified with the addition of salts; chaotropic (sodium hexafluorophosphate – Na PF₆), cosmotropic (sodium phosphate – NaH₂PO₄), and neutral (NaCl) on Zorbax XDB C18 column. The effect of the eluent composition on the analytes retention (k), system efficiency (N), peak symmetry (A_s), and LOD values were all examined and compared to unmodified organic‐aqueous mobile phase system. It was established that eluent modified with chaotropic salts addition was also the most advantageous according to other peak parameters such as the theoretical plates numbers and asymmetry factors. The lower LOD values were achieved in comparison to unmodified organic‐aqueous eluent system. Compatibility of lipophilicity parameters calculated by the use of computer software with experimental ones measured by RP‐HPLC was also the best for chaotropic modified mobile phase. To explain the observed phenomena, molecular modeling was performed for chosen representative compound in different environment representing examined mobile phase composition.