Behavior and surface energies of polybenzoxazines formed by polymerization with argon,oxygen, and hydrogen plasmas

Polybenzoxazine (PBZZ) thin films can be fabricated by the plasma‐polymerization technique with, as the energy source, plasmas of argon, oxygen, or hydrogen atoms and ions. When benzoxazine (BZZ) films are polymerized through the use of high‐energy argon atoms, electronegative oxygen atoms, or excited hydrogen atoms, the PBZZ films that form possess different properties and morphologies in their surfaces. High‐energy argon atoms provide a thermodynamic factor to initiate the ring‐opening polymerization of BZZ and result in the polymer surface having a grid‐like structure. The ring‐opening polymerization of the BZZ film that is initiated by cationic species such as oxygen atoms in plasma, is propagated around nodule structures to form the PBZZ. The excited hydrogen atom plasma initiates both polymerization and decomposition reactions simultaneously in the BZZ film and results in the formation of a porous structure on the PBZZ surface. We evaluated the surface energies of the PBZZ films polymerized by the action of these three plasmas by measuring the contact angles of diiodomethane and water droplets. The surface roughness of the films range from 0.5 to 26 nm, depending on the type of carrier gas and the plasma‐polymerization time. By estimating changes in thickness, we found that the PBZZ film synthesized by the oxygen plasma‐polymerization process undergoes the slowest rate of etching in CF₄ plasma. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4063–4074, 2004     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

Intra- versus intermolecular hydrogen bonds in salicylamide derivatives

The crystal structures, solid-state infrared patterns, and thermal properties of two polymorphs of 4-nitrosalicylanilide are presented. In both polymorphs, intramolecular hydrogen bonds are found between the phenol oxygen and the amide proton, and intermolecular hydrogen bonds are found between the amide carbonyl oxygen and the phenol proton. These hydrogen bond patterns are compared to those found in other known salicylamide derivatives and an analysis is given of the factors contributing to preferences for intra- or intermolecular hydrogen bonds in these structures. Crystal data: polymorph, orthorhombic,Pbca,a=11.003(4),b=27.959(7),c=7.622(5) Å,Z=4,V=2345(3) ų, andR=0.038 (1351 reflections); polymorph, monoclinic,P2₁/a,a=28.36(1),b=11.64(1),c=7.293(8) Å,=90.68(6)°,Z=8,V=2408 ų, andR=0.043 (2425 reflections).     

The application of NMR and MS methods for detection of adulteration of wine,fruit juices,and olive oil. A review

This review covers two important techniques, high resolution nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS), used to characterize food products and detect possible adulteration of wine, fruit juices, and olive oil, all important products of the Mediterranean Basin. Emphasis is placed on the complementary use of SNIF-NMR (site-specific natural isotopic fractionation nuclear magnetic resonance) and IRMS (isotope-ratio mass spectrometry) in association with chemometric methods for detecting the adulteration.     

Thermal copolymerization of acrylonitrile with methacrylate units arranged in matrix

Copolymerization of acrylonitrile with methacrylates on a matrix has been examined (using methacrylate of p-cresol-formaldehyde resin). It has been found that the copolymerization proceeds at 70° without an initiator. The reactivity ratios depend on the length of the matrix used. The method of calculating Q and e according to the Alfrey-Price scheme has been discussed for the system under investigation.     

Über eine neue automatische Apparatur zur Zentigramm-Bestimmung von Kohlenstoff und Wasserstoff in organischen Substanzen

Zusammenfassung Das vom Verfasser undE. Sucharda schon 1928 angewandte Prinzip, die durch das Verhalten der Substanz beim Erhitzen bewirkten Druckschwankungen im Verbrennungsrohre zum Zwecke der automatischen Regulierung der Vergasungsgeschwindigkeit der Substanz bei der Elementaranalyse auszunutzen, wurde bei der Konstruktion einer neuen, elektrisch betriebenen, automatischen Apparatur angewandt. Hierbei wird das mit der Substanz gefüllte Mikroschiffchen mittels eines elektrischen Hochfrequenzgenerators erhitzt. Der Stromzufluß zu dem Hochfrequenzgenerator wird durch die erwähnten Druckschwankungen einoder ausgeschaltet. Die Verbrennung verläuft dann bei praktisch konstantem Druck im Verbrennungsrohre, also auch bei konstantem Sauerstoffüberschuß. Die neue Apparatur wird an Hand beigefügter Abbildungen beschrieben. Als Absorptionsmittel für Stickstoffoxyde werden 1 bis 2 g Bleidioxyd in einem 12 cm langen Porzellanschiffchen bei 190° angewandt. Die Absorption des Wassers erfolgt durch wasserfreies Kobaltchlorid, die der Kohlensäure ausschließlich durch Ascarit. Die Sauerstoffgeschwindigkeit im Verbrennungsrohre beträgt 8 ml pro Minute. Bei Substanzen, die mehr als 10% N enthalten, wird zwischen den Kohlensäureabsorptionsapparat und den Wasserabsorptionsapparat ein mit Mangandioxyd gefüllter Apparat eingeschaltet.

---

Summary The principle used by the author andE. Sucharda as early as 1928, which employs the variations in pressure in the combustion tube resulting from the behavior of the substance when heated, for automatically regulating the rate of gasifying the substance was applied in the construction of a new electrically operated automatic apparatus. The micro boat charged with the sample is heated by means of a high frequency generator. The flow of current to the high frequency generator is switched on and off by the variations in pressure mentioned above. The combustion then proceeds at practically constant pressure in the combustion tube, and even when there is a constant excess of oxygen. The new apparatus is described in the accompanying figures. The nitrogen oxides are absorbed in 1 to 2 grams of lead dioxide contained in a porcelain boat (12 cm long) at 190°. The absorption of the water is by means of anhydrous cobalt chloride, while the carbon dioxide is taken up in ascarite. The speed of the oxygen in the combustion tube is 8 ml per minute. In the case of samples that contain more than 10% nitrogen, an apparatus filled with manganese dioxide is placed between the carbon dioxide absorber and the apparatus for taking up the water.

---

Résumé Le principe de l'utilisation des variations de pression qui se produisent dans un tube à combustion en analyse élémentaire, lors du chauffage de la substance, a été utilisé dès 1928 par l'auteur etE. Sucharda pour la régulation automatique de la gazéification de cette substance. Il a été appliqué à la construction d'un nouvel appareil automatique commandé électriquement. La micronacelle qui contient la substance est chauffée électriquement à l'aide d'un générateur de courant de haute fréquence. Les variations de pression pendant la combustion provoquent l'ouverture ou la fermeture du circuit d'alimentation de ce générateur. Il en résulte que la combustion est effectuée à pression pratiquement constante ainsi qu'à excès d'oxygène constant. Ce nouvel appareil est décrit sur les figures de la publication.On utilise 1 à 2 grammes de bioxyde de plomb disposés dans une nacelle de porcelaine de 12 cm de longueur, portée à 190° pour absorber les oxydes de l'azote. L'eau est absorbée par du chlorure de cobalt anhydre et l'anhydride carbonique exclusivement par de l'ascarite. Le débit du courant d'oxygène dans le tube de combustion est de 8 ml par minute. Pour les substances contenant plus de 10% d'azote, on intercale un absorbeur à bioxyde de manganèse entre l'absorbeur à anhydride carbonique et l'absorbeur à eau.

     

Etude de la chloration du polychlorure de vinyle en fonction de sa tacticite

Polyvinyl chloride samples of various tacticity have been prepared and photochlorinated in CCl₄ for 4 hr. The chlorination degree correlates directly with the degree of syndiotacticity. Initial PVC with syndiotacticity about 56 per cent, which can be regarded as alternate sequences of syndiotactic and isotactic diads, is quickly chlorinated. The mechanism of chlorine attack on the macromolecula is directly connected with the stereoregularity.     

Complexes of carbonyl compounds with RnAIX3n compounds : IV. The evidence for the formation of cyclic complexes chloroaluminium compounds

Reasonably stable 1 : 2 complexes are formed by carbonyl compounds with chloroaluminium compounds, usually in equilibrium with a 1: 1 complex, however with trimethylaluminium only a 1 : 1 complex is formed. In the case of complexes with an excess of MeAlCl₂, a disproportionation reaction occurs. Possible structures are discussed in light of PMR and IR spectroscopy, dipole moments and molecular weight determination. The previously proposed cyclic six-membered ring is the most reliable structure for the 1 : 2 complex.     

Investigations of aromatic polyesters with polynaphthalene systems in the main chain—VI: NMR studies of the structure of the aromatic copolyesters

Nuclear magnetic resonance spectra of several kinds of terephthalic copolyesters of 4,4′dihydroxydinaphthyl 1,1′ and 2,2 bis(4-hydroxyphenyl) propane were recorded. Proton signals of the terephthalic acid unit corresponding to heterolinkages and homolinkages could be observed in the range from 8.23 to 8.53 ppm. The average sequence lengths and the degrees of randomness in the copolyesters were calculated from the intensities of these signals.