Supercontinuum generation in ultraviolet-irradiated fibers

We demonstrate that UV exposure of highly nonlinear, germanosilicate fibers causes a strong change in their chromatic dispersion and can significantly alter the infrared supercontinuum generation in these fibers. By varying the level of UV exposure to the fiber, we show that the dispersion zero and the short-wavelength edge of the supercontinuum can be changed by more than 100 nm. A nonlinear Schr?dinger equation model of the continuum generation in the nonlinear fiber shows that the short-wavelength behavior of the continuum is primarily controlled by changes in the fiber dispersion caused by the UV-induced change in the refractive index of the fiber core.     

高Tc超导体YBCO磁通钉扎的计算机模拟研究

临界电流密度Jc是影响高温超导体在强电领域应用的一个重要参数,在实际应用中,特别在外加磁场下,临界电流密度与超导材料的磁通钉扎性质密切相关.因此,磁通钉扎一直是高温超导体研究中的一个重要领域.由于高温超导体磁通钉扎力密度Fp的标度律存在,本文根据D.Dew-Hughes总结的钉扎力函数,主要存在两种主要作用类型(正常相和△K).我们将D.Dew-HugBes给出的钉扎力密度Fp标度函数改进为一个简化的具有物理意义的函数表达式.结合文献中已有的实验数据,我们对YBcO进行了计算机模拟,确定了它的磁通钉扎类型,模拟的研究结果与实际情况比较吻合.     

Grating resonances in air-silica microstructured optical fibers

We report what is believed to be the first demonstration of optical fiber gratings written in photonic crystal fibers. The fiber consists of a germanium-doped photosensitive core surrounded by a hexagonal periodic air-hole lattice in a silica matrix. The spectra of these gratings allow for a detailed characterization of the fiber. In particular, the gratings facilitate coupling to higher-order leaky modes. We show that the spatial distribution and the effective index of these modes are determined largely by the design of the lattice and that the grating spectra are unaffected by the refractive index surrounding the fiber. We describe these measurements and corresponding simulations and discuss their implications for the understanding of such air-hole structures.     

The obstacle problem for beams and plates

The numerical solution of the obstacle problem for beams and plates by means of variational inequalities and finite elements is examined. Algorithms for the solution of the discrete problem are discussed and particular attention is paid to different methods of approximating the constraint. The results of some numerical experiments for beams and plates are included.     

Ignition delay times of methyl oleate and methyl linoleate behind reflected shock waves

Ignition delay times for methyl oleate (C₁₉H₃₆O₂, CAS: 112-62-9) and methyl linoleate (C₁₉H₃₄O₂, CAS: 112-63-0) were measured for the first time behind reflected shock waves, using an aerosol shock tube. The aerosol shock tube enabled study of these very-low-vapor-pressure fuels by introducing a spatially-uniform fuel aerosol/4% oxygen/argon mixture into the shock tube and employing the incident shock wave to produce complete fuel evaporation, diffusion, and mixing. Reflected shock conditions covered temperatures from 1100 to 1400 K, pressures of 3.5 and 7.0 atm, and equivalence ratios from 0.6 to 2.4. Ignition delay times for both fuels were found to be similar over a wide range of conditions. The most notable trend in the observed ignition delay times was that the pressure and equivalence ratio scaling were a strong function of temperature, and exhibited cross-over temperatures at which there was no sensitivity to either parameter. Data were also compared to the biodiesel kinetic mechanism of Westbrook et al. (2011) [10], which underpredicts ignition delay times by about 50%. Differences between experimental and computed ignition delay times were strongly related to existing errors and uncertainties in the thermochemistry of the large methyl ester species, and when these were corrected, the kinetic simulations agreed significantly better with the experimental measurements.