Magnetic and magneto-optical properties of CoFeCrSiB amorphous ribbons

In this paper we investigate the surface magnetic properties of as-quenched (AQ) CoFeCrBSi ribbons prepared by planar flow casting method with using magneto-optic Kerr effect (MOKE). Measured hysteresis loops in longitudinal and transversal configurations enable us to obtain the information of ribbons surface magnetic properties. Moreover, we suggest new magneto-optic method, which is based on measurements of magneto-optical effects depending on DC current flowing through the ribbon. Experimental data of AQ ribbons are then compared with the model, which describes the influence of incidence angle on magneto-optical angles.     

Hydrothermal synthesis and Magnetocaloric effect of La0.5Ca0.3Sr0.2MnO3

The hydrothermal synthesis and magnetic entropy change for the perovskite manganite La_0.5Ca_0.3Sr_0.2MnO₃ have been studied. The La_0.5Ca_0.3Sr_0.2MnO₃ can be produced as phase-pure, crystalline powders in one step from solutions of metal salts in aqueous potassium hydroxide solution at a temperature of 513 K in 72 h. Scanning electron microscopy shows that the materials are made up of cuboid-shaped particles in typical dimension of 4.0×2.5×1.6 μm. Heat treatment can improve the magnetocaloric effect for the hydrothermal sample. The maximum magnetic entropy change ΔS_M for the as-prepared sample is 0.88 J kg⁻¹ K⁻¹ at 315 K for a magnetic field change of 2.0 T. It increases to 1.52 J kg⁻¹ K⁻¹, near its Curie temperature (317 K) by annealing the sample at 1473 K for 6 h. The hydrothermal synthesis method is a feasible route to prepare high-quality perovskite material for magnetic refrigeration application.     

Determining the statistical parameters of nonstationary stochastic processes

We construct estimators of the expectation of a nonstationary stochastic process with time-dependent variance. Limit relations are obtained for particular correlation dependences.Translated from Statisticheskie Metody, pp. 98–103, 1982.     

Nickel peroxide: A more probable intermediate in the Ni(II)‐catalyzed decomposition of peroxomonosulfate

The Ni(II) ion catalyzed thermal decomposition of peroxomonosulfate (PMS) was studied in the pH range 3.42–5.89. The rate is first order in [PMS] and Ni(II) ion concentrations. At pH greater than or equal to 5.23, the reaction becomes zero order in [PMS] and this changeover in the order of the reaction occurs at a higher concentration of nickel ions. The first‐order kinetics in PMS can be explained as a rate‐limiting step and is the transformation of nickel peroxomonosulfate into nickel peroxide. This peroxide intermediate reacts rapidly with another PMS to give oxygen and Ni(II). The formation of nickel peroxide is associated with a small negative or nearly zero entropy of activation. The zero‐order kinetics in [PMS] can be explained by the fact that the hydrolysis of aquated nickel(II) ions into hydroxocompounds is the rate‐limiting step. The turnover number is 2 at pH 3.42 and increases with pH. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 320–237, 2007     

The solution of a convection–diffusion–reaction equation arising from cathodic reduction in a pulsating crack

This paper derives the convection–diffusion-reaction equation governing the reaction between the dissolved oxygen in sea-water and the steel walls of a pulsating crack. By the neglect of the diffusion term it is shown that an exact solution of the convection-reaction equation can be obtained. A numerical method for the solution of the complete convection–diffusion-reaction equation is derived by the use of finite differences. The numerical computation of the initial transient and the final periodic steady-state values is also discussed.     

Inner-sphere oxidation of iron(II) by tris(malonato)cobaltate(III)

The kinetics of oxidation of Fe²⁺ by [Co(C₃H₂O₄)₃]^3? in acidic solutions at 605 nm showed a simple first-order dependence in each reactant concentration. The second-order rate constant dependence on [H⁺] is in accordance with eqn (i) k₂ = k′₂ + k₃[H⁺] (i) where k′₂ and k₃ have values of 73.4 ± 14.0 M ^?1 s^?1 and 353 ± 41 M^?2 s^?1, respectively, at 1.0 M ionic strength (NaClO₄) and 25°C. At 310 nm the formation and decomposition of an intermediate, believed to be [FeC₃H₂O₄]⁺, was observed. The increase in the rate of oxidation with increasing [H⁺] was interpreted in terms of a “one-ended” dissociation mechanism which facilitates chelation of Fe₂₊ by the carbonyl oxygens of malonate in the transition state.     

Vortices in the superconducting transition of the 2+1 Abelian Higgs model

We study the phase transitions to the Higgs phase of the finite temperature 2+1 dimensional Abelian Higgs model in terms of Ginzburg-Landau vortices. We find that vorticity is a good order parameter which allows us to determine the order of the transitions.     

Study to improve the quality of a Mexican straight run gasoil over NiMo/γ-Al2O3 catalysts

Four NiMo catalyst supported on Al₂O₃ with different textural properties have been studied in the hydrodesulfurization (HDS), hydrodenitrogenation (HDN) and hydrodearomatization (HDA) of a Mexican straight run gasoil (SRGO). All reactions were carried out at three different temperatures 613, 633, and 653 K. Alumina supports were analysed by pyridine FTIR-TPD and nitrogen physisorption in order to determine their surface acidity and textural properties, respectively. TPR studies of the NiMo catalysts were analysed to correlate their hydrogenating properties. Metallic particles were characterized (after sulfidation) using transmission electron microscopy (TEM). Catalytic activities are discussed in relation to the physicochemical properties of NiMo catalysts. The importance of textural properties on coke deposition has been emphasized. The results of catalytic activity of these materials varied depending on dispersed MoS particles and pore distribution in final catalysts. The optimum pore diameter was found around 80 Å for HDS and HDN.     

Study of the structural and optical properties of GaN/AlN quantum dot superlattices

We study GaN/AlN Quantum Dot (QD) superlattices utilizing the STREL environment which allows the building of atomistic models, relaxation of the structures, the calculation of the electronic states and optical transitions and the visualization of the results. The forces are calculated using an appropriate Keating or Stillinger–Weber interatomic potential model and the electronic states and optical transitions using a tight-binding formulation which is economical and produces realistic electronic properties. The relaxed structure has strains mainly in the GaN region which are compressive and small tensile strains in the AlN region, mainly below the QD. In the calculation of the electronic states and of the optical transitions the strains are included realistically at the atomistic level. The study of the wavefunctions close to the fundamental gap show how these strains influence the form and spatial extent of the wavefunction. Very close to the fundamental gap the valence and some conduction states are confined in the QD and have considerable oscillator strength.