In situ XPS study of Pd(1 1 1) oxidation. Part 1: 2D oxide formation in 10 mbar O2

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 3 × 10⁻³ mbar O₂. A number of adsorbed/dissolved oxygen species were identified by in situ XPS, such as the two dimensional surface oxide (Pd₅O₄), the supersaturated O_ads layer, dissolved oxygen and the R 12.2° surface structure.Exposure of the Pd(1 1 1) single crystal to 3 × 10⁻³ mbar O₂ at 425 K led to formation of the 2D oxide phase, which was in equilibrium with a supersaturated O_ads layer. The supersaturated O_ads layer was characterized by the O 1s core level peak at 530.37 eV. The 2D oxide, Pd₅O₄, was characterized by two O 1s components at 528.92 eV and 529.52 eV and by two oxygen-induced Pd 3d_5/2 components at 335.5 eV and 336.24 eV. During heating in 3 × 10⁻³ mbar O₂ the supersaturated O_ads layer disappeared whereas the fraction of the surface covered with the 2D oxide grew. The surface was completely covered with the 2D oxide between 600 K and 655 K. Depth profiling by photon energy variation confirmed the surface nature of the 2D oxide. The 2D oxide decomposed completely above 717 K. Diffusion of oxygen in the palladium bulk occurred at these temperatures. A substantial oxygen signal assigned to the dissolved species was detected even at 923 K. The dissolved oxygen was characterised by the O 1s core level peak at 528.98 eV. The “bulk” nature of the dissolved oxygen species was verified by depth profiling.During cooling in 3 × 10⁻³ mbar O₂, the oxidised Pd²⁺ species appeared at 788 K whereas the 2D oxide decomposed at 717 K during heating. The surface oxidised states exhibited an inverse hysteresis. The oxidised palladium state observed during cooling was assigned to a new oxide phase, probably the R 12.2° structure.     

MEI, SOI and mid-range correlations in the onset of El Niño–Southern Oscillation

Entropy analysis and wavelet transforms are used to study the Southern Oscillation index (SOI) and multivariate ENSO index (MEI) indexes for the El Niño–Southern Oscillation. Trends to large decreasing symbolic chains responsible for La Niña and interrupted increasing chains for El Niño are found in the MEI persistence series. These are all located in regions where the wavelet transforms of both indexes reveal the existence of mid-range correlations. The SOI and MEI indexes are mutually correlated in a non-trivial manner in the time.     

Quasi-monocrystalline silicon for thin-film devices

Thermal crystallization of a double layer porous Si film creates a monocrystalline Si film with a thin separation layer between the Si film and the reusable starting wafer. The process enables transfer of thin monocrystalline Si films to foreign substrates, whereby devices may be formed before or after separation of the film. Sub-micrometer thick films are almost compact, while films with a thickness of several μm contain voids, and are therefore termed “quasi-monocrystalline”. Internal voids strongly enhance optical absorption by light scattering. The hole mobility is 78 cm² V^-1 s^-1 at a p-type starting wafer resistivity of 0.05 Ω cm. Received: 24 March 1999 / Accepted: 29 March 1999 / Published online: 5 May 1999     

Detection of myocardial viability by low-dose dobutamine Cine MR imaging

The purpose of this work was to test the diagnostic value of dobutamine stress magnetic resonance imaging (MRI) for predicting recovery of regional myocardial contractility after revascularization. Cardiac wall motion abnormalities are due to either non-viable and/or scarred, or viable, but hibernating, myocardial tissue. Dobutamine stress leads to increased systolic wall thickening only in viable myocardium. Twenty-five patients with akinetic or dyskinetic myocardial regions were examined with a Cine FLASH-2D sequence at rest and during dobutamine stress (10 μg/kg/min). Patients were re-examined at rest 3, and in case of persisting wall motion defects, 6 months after revascularization. Criterion of viability was increasing end-systolic wall thickening during stress and/or at follow-up. Akinetic regions related either to the LAD (n = 19) or to the RCA (n = 6) were judged viable if >=50% of the affected segments improved. MR studies were completed in all subjects without arrhythmia or need for early terminations due to symptoms. Sensitivity, specificity, and positive predictive value for the prediction of myocardial viability were 61%, 90%, and 87% for the segment-related analysis, and 76%, 100%, and 100% for the patient-related analysis based on coronary artery distribution, respectively. Dobutamine stress MRI allows to predict global functional recovery of akinetic myocardial regions after revascularization with a high positive predictive value and high specificity.     

ConFlo III - an interface for high precision delta(13)C and delta(15)N analysis with an extended dynamic range

A newly developed interface coupling a CHN combustion device (elemental analyser 'EA') to an isotope ratio mass spectrometer is described and evaluated. The purpose of the device is to extend the dynamic range of delta(13)C and delta(15)N analysis from less than 2 orders of magnitude to more than 3 orders of magnitude. Carbon isotope ratio measurements of atropine as a model compound have been performed analysing between 1 μg to 5 mg C with acceptable to excellent precision (0.6 to 0.06 per thousand, delta-notation). The correction due to the blank signal is critical for sample amounts smaller than 4 μg C. The maximum sample weight is determined by the combustion capacity of the EA. Larger sample amounts are measured using dilution of a small part of the EA effluent with helium. The dilution mechanism works virtually free of isotope fractionation. Copyright 1999 John Wiley & Sons, Ltd.     

19.4%‐efficient large‐area fully screen‐printed silicon solar cells

We demonstrate industrially feasible large‐area solar cells with passivated homogeneous emitter and rear achieving energy conversion efficiencies of up to 19.4% on 125 × 125 mm² p‐type 2–3 Ω cm boron‐doped Czochralski silicon wafers. Front and rear metal contacts are fabricated by screen‐printing of silver and aluminum paste and firing in a conventional belt furnace. We implement two different dielectric rear surface passivation stacks: (i) a thermally grown silicon dioxide/silicon nitride stack and (ii) an atomic‐layer‐deposited aluminum oxide/silicon nitride stack. The dielectrics at the rear result in a decreased surface recombination velocity of S_rear = 70 cm/s and 80 cm/s, and an increased internal IR reflectance of up to 91% corresponding to an improved J_sc of up to 38.9 mA/cm² and V_oc of up to 664 mV. We observe an increase in cell efficiency of 0.8% absolute for the cells compared to 18.6% efficient reference solar cells featuring a full‐area aluminum back surface field. To our knowledge, the energy conversion efficiency of 19.4% is the best value reported so far for large area screen‐printed solar cells. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Correlation between α-decay energies of superheavy nuclei involving the effects of symmetry energy

A formula for the relationship between the α-decay energies (Q values) of superheavy nuclei (SHN) is presented, which is composed of the effects of Coulomb energy and symmetry energy. It can be employed not only to validate the experimental observations and measurements to a large extent, but also to predict the Q values of heaviest SHN with a high accuracy generally which will be very useful for future experiments. Furthermore, the shell closures in superheavy region and the effect of the symmetry energy on the stability of SHN against α decay are discussed with the help of this formula.     

Two-step melting in two dimensions: first-order liquid-hexatic transition

Melting in two spatial dimensions, as realized in thin films or at interfaces, represents one of the most fascinating phase transitions in nature, but it remains poorly understood. Even for the fundamental hard-disk model, the melting mechanism has not been agreed upon after 50 years of studies. A recent Monte?Carlo algorithm allows us to thermalize systems large enough to access the thermodynamic regime. We show that melting in hard disks proceeds in two steps with a liquid phase, a hexatic phase, and a solid. The hexatic-solid transition is continuous while, surprisingly, the liquid-hexatic transition is of first order. This melting scenario solves one of the fundamental statistical-physics models, which is at the root of a large body of theoretical, computational, and experimental research.