氮杂冠醚研究：Ⅸ.双偶氮基开链冠醚的合成及紫外可见光谱研究

用邻硝基苯酚经过先桥接，还原，然后使生成的重氮盐分别与苯酚，取代苯酚和取代苯胺偶联的方法，合成了两类新型的双偶氮基于链有色冠醚，方法简便，产率高，在一定的酸性介质中，这类冠醚存在着铵醌互交异构。测定了它们在不同介质中的紫外可见光谱，并对最大吸收峰进行归属。     

A New Approach to α—Bromochalcones

α-Bromo benzolymethylene triphenylphosphorane 3 has been synthesized by the reaction of benzoylmethylene triphenylphosphorane 1 with N-bromosuccinimide in the yield of 87% and can react with aromatic aldehydes 4 to give α-bromochalcones 5 in good yields.     

超导体Y-Ba-Cu-O复合氧化物催化苯酚羟化反应的研究

利用HZOZ和苹酚联产对苯二醋和邻苯二酚是目前二酚生产领域中比较活跃的课题．长久以来，人们曾利用酸、金属盐、金属配合物等作为催化剂，在均相体系中来研究其对苯酸羟化反应的催化活性．由平均相反应存在着明显的缺点，后来又转向了多相催化剂的开发，先后出现了TSull］TS42     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

Am(III) adsorption on oxides of aluminium and silicon: effects of humic substances,pH, and ionic strength

The adsorption of Am(III) (total concentration 10(-9) mol/l) on alumina, silica, and hematite was studied by a batch technique. The effects of pH, ionic strength, and humic substances on the adsorption of Am(III) on alumina and silica were investigated, and the adsorption isotherms of Am(III) on alumina and silica at different pH values were determined. It was found that compared with the adsorption of Am(III) on alumina, the adsorbability of silica on the basis of mass is less, the relative adsorption rate on silica is slower, the sensitivity of adsorption on silica to ionic strength is less, the dependence of adsorption on silica on pH is gentler, and consequently that the adsorption characteristics of Am(III) on alumina and silica are distinctly different. The negative effect of fulvic acid on the adsorption on silica and the positive effect of humic acid on the adsorption on alumina were found. In contrast to the Am(III) adsorption on alumina and silica, a tremendously high adsorbability of Am(III) on hematite was found. The sequence of adsorbabilities of Am(III) on the basis of mass is Fe2O3 > Al2O3 > SiO2.     

Solid Phase Catalytic Oxidation of Alcohols by Polymer Supported Rare Earth Catalysts

Oxidation of alcohols to the corresponding aldehydes or ketones is one of the most fundamental reactions in organic chemistry [1,2]. Some of the products of the oxidation exhibit an important role in the organic synthesis as well as pharmaceutical synthesis. In most reactions, the lanthanide complexes show satisfied catalytic activities for some compounds. Furthermore, there has been increasing interest in the lanthanide complexes and several reports have appeared in the literature [3, 4]. But the exploitation of these complexes for the oxidation of some organic substrates has been limited. Here we reported a method for the preparation and the catalytic properties as well as the recycling of lanthanide complexes in oxidation of alcohols.The synthetic procedure for the polymer supported lanthanide complexes is shown as following(scheme 1):●-NH2+CICH2COOH(C2Hs)3N→●-NHCH2COOHM=Ce(Ⅲ), Tb(Ⅲ), Sm(Ⅲ)scheme 1The oxidation of benzyl alcohol was carried out in the presence of iodosylbenzene by the polymer supported Ce(Ⅲ), Tb(Ⅲ) and Sm(Ⅲ) catalysts at 80℃ for 4.0h, the yields of benz-aldehyde are as following (table 1):Table 1 Oxidation of benzyl alcohol with the supported catalysts**Reaction condition: benzyl alcohol 0.1 mmol, iodosylbenzene 0.15mmol,catalyst 0.2mg, 80℃ for 4.0h in 1,2-dichloroethane.It can be seen from the table that the Tb(Ⅲ) complex shows higher catalytic activity for the oxidation of benzyl alcohol. Further investigation is now being carded on to optimize the results.     

Molecular Simulation on Transport Properties of Confined Water

The diffusivity and viscosity of water confined in micropores were studied by molecular dynamics simulations. The effects of pore width and density were analyzed at pore widths from 0.9 to 2.6nm. The diffusivity in micropores is lower than that of the bulk, and it decreases as pore width decreases and as density increases. But the viscosity in micropores is much larger than that of the bulk, and it increases as pore width decreases and as density increases. The diffusivity in channel parallel direction is obviously larger than that in channel perpendicular directions.     

Use of a native affinity ligand for the detection of G proteins by capillary isoelectric focusing with laser-induced fluorescence detection

Affinity probe capillary isoelectric focusing (CIEF) with laser-induced fluorescence was explored for detection of Ras-like G proteins. In the assay, a fluorescent BODIPY FL GTP analogue (BGTPgammaS) and G protein were incubated resulting in formation of BGTPgammaS-G protein complex. Excess BGTPgammaS was separated from BGTPgammaS-G protein complex by CIEF using a 3-10 pH gradient and detected in whole-column imaging mode. In other cases, a single point detector was used to detect zones during the focusing step of CIEF using a 2.5-5 pH gradient. In this case, analyte peaks passed the detector in approximately 5 min at an electric field of 350 V/cm. Detection during focusing allowed for more reproducible assays at shorter times but with a sacrifice in sensitivity compared to detection during mobilization. Resolution was adequate to separate BGTPgammaS-Ras and BGTPgammaS-Rab3A complexes. Formation of specific complexes was confirmed by adding GTPgammaS to samples containing BGTPgammaS-G protein. GTPgammaS competed with BGTPgammaS for G protein binding sites resulting in decreased BGTPgammaS-G protein peak heights. The concentrating effect of CIEF enabled detection limits of 30 pM.     

Vibronic fine structure in the absorption spectrum of oligothiophene thin films

A multimode Holstein Hamiltonian is used to describe optical excitations in quaterthiophene pinwheel aggregates. The Hamiltonian includes the coupling of excitons originating from the 1A(g)-->1B(u) electronic transition to phonons originating from the five intramolecular vibrational modes known from oligothiophene solution absorption/emission spectroscopy. The resulting eigenstates with lowest energy are best described as hybrid polaron phonons. The polarons are formed by coupling excitons with the higher frequency (688, 1235, and 1551 cm(-1)) vibrational modes, while the (optical) phonons arise from the lower frequency (161 and 333 cm(-1)) modes. The polaron phonons are responsible for the fine structure defining the A(1) band in the low-energy region of the absorption spectrum, ranging from the band origin to approximately 1500 cm(-1) beyond. The calculated A(1) band of quaterthiophene aggregates agrees favorably with that observed from thin films.     

Two N,N′‐diaryl‐2,2,2‐trichloroethane‐1,1‐diamines: hydrogen‐bonded supramolecular structures in one and two dimensions

The molecules of 2,2,2‐trichloro‐N,N′‐diphenylethane‐1,1‐diamine, C₁₄H₁₃Cl₃N₂, are linked into (040) sheets by a combination of C—H...Cl and C—H...π(arene) hydrogen bonds. In 2,2,2‐trichloro‐N,N′‐bis(4‐methylphenyl)ethane‐1,1‐diamine, C₁₆H₁₇Cl₃N₂, the molecules are linked into C(7) chains by two independent C—H...Cl hydrogen bonds and one Cl...Cl contact.