A SERS-based immunoassay for porcine circovirus type 2 using multi-branched gold nanoparticles

We report on a facile immunoassay for porcine circovirus type 2 (PCV2) based on surface enhanced Raman scattering (SERS) using multi-branched gold nanoparticles (mb-AuNPs) as substrates. The mb-AuNPs in the immunosensor act as Raman reporters and were prepared via Tris base-induced reduction and subsequent reaction with p-mercaptobenzoic acid (pMBA). They possess good stability and high SERS activity. Subsequently, the modified mb-AuNPs were covalently conjugated to the monoclonal antibody (McAb) against the PCV2 cap protein to form SERS immuno nanoprobes. These were captured in a microtiterplate via a immunoreaction in the presence of target antigens. The effects of antibody concentration, reaction time and temperature on the sensitivity of the immunoassay were investigated. Under optimized assay conditions, the Raman signal intensity at 1,076 cm^?1 increases logarithmically with the concentrations of PCV2 in the concentration ranging from 8?×?10² to 8?×?10⁶ copies per mL. The limit of detection is 8?×?10² copies per mL. Compared to conventional detecting methods such as those based on PCR, the method presented here is rapid, facile and very sensitive.

Zinc-Mediated Cyclodimerization of 1,5-Diaryl-1,4-pentadien-3-one in Aqueous Solution Under Ultrasound Irradiation

Synthesis of 2-cinnamoyl-1-styryl-3,4-diarylcyclopentanol via cyclodimerization of 1,5-diaryl-1,4-pentadien-3-one mediated by zinc was carried out in good yields at room temperature in NH₄Cl (aq.) and tetrahydrofuran under ultrasonic irradiation. In comparison with conventional methods, the main advantages of the present procedure are shorter reaction time and better yields.     

Electroless plating of copper on fly ash cenospheres using polyaniline‐Pd activation

The polyaniline of different intrinsic oxidation states, viz., the emeraldine (EM) and the leucoemeraldine (LM) states, were coated on 3‐aminopropyltriethoxy silane modified fly ash cenospheres. Without prior sensitization by SnCl₂ solution, Pd activation by PdCl₂ solution was carried out on EM and LM laden cenospheres, followed by electroless plating of copper (Cu). The topography and composition of the composites were characterized by scanning electron microscopy, X‐ray diffraction, and X‐ray photoelectron spectroscopy, etc. The results indicate that the oxidation state of the LM layer showed a much bigger increase than that of the EM layer in the Pd activation process, while coupled Pd reduction underwent to a more extent on the LM layer. The metallic Pd atoms on the LM and EM layers surface initiated the subsequent electroless plating of Cu, and the coated Cu on LM laden cenospheres had a much more uniform and compact morphology than that on EM laden cenospheres. Copyright © 2012 John Wiley & Sons, Ltd.     

FIPSDock: A new molecular docking technique driven by fully informed swarm optimization algorithm

The accurate prediction of protein–ligand binding is of great importance for rational drug design. We present herein a novel docking algorithm called as FIPSDock, which implements a variant of the Fully Informed Particle Swarm (FIPS) optimization method and adopts the newly developed energy function of AutoDock 4.20 suite for solving flexible protein–ligand docking problems. The search ability and docking accuracy of FIPSDock were first evaluated by multiple cognate docking experiments. In a benchmarking test for 77 protein/ligand complex structures derived from GOLD benchmark set, FIPSDock has obtained a successful predicting rate of 93.5% and outperformed a few docking programs including particle swarm optimization (PSO)@AutoDock, SODOCK, AutoDock, DOCK, Glide, GOLD, FlexX, Surflex, and MolDock. More importantly, FIPSDock was evaluated against PSO@AutoDock, SODOCK, and AutoDock 4.20 suite by cross‐docking experiments of 74 protein–ligand complexes among eight protein targets (CDK2, ESR1, F2, MAPK14, MMP8, MMP13, PDE4B, and PDE5A) derived from Sutherland‐crossdock‐set. Remarkably, FIPSDock is superior to PSO@AutoDock, SODOCK, and AutoDock in seven out of eight cross‐docking experiments. The results reveal that FIPS algorithm might be more suitable than the conventional genetic algorithm‐based algorithms in dealing with highly flexible docking problems. © 2012 Wiley Periodicals, Inc.     

Influence of Emulsifiers on Acrylate Latex Blends

The poly(methyl methacrylate/butyl acrylate/acrylic acid) [P(MMA/BA/AA)] and poly (styrene/butyl acrylate/acrylic acid) [P(St/BA/AA)] latexes were synthesized using the emulsifier octylphenol polyoxyethylene(10) ether (OP-10) and ammonium sulfate allyloxy nonylphenoxy poly(ethyleneoxy)(10) ether(DNS-86). The optimum amount of OP-10 and DNS-86 was 1.5% and 2.5% respectively. The P(MMA/BA/AA) and P(St/BA/AA) latex containing 1.5% OP-10 or 2.5% DNS-86 were blended pairwise. The performances of latex blends and parent latexes as a function of emulsifiers content in parent latexes were determined. The results indicated that the stability of latex blends is favorable, and particle size distribution was more uniform and thermal stability was improved after blending.     

Immobilization and sustained release of cefalexin on MCF nano-mesoporous material

Abstract

Mesocellular foams (MCF) silica nanometer mesoporous molecular sieve was successfully synthesized by hydrothermal route. This method used poly(ethylene glycol)-block-poly(propyl glycol)-block-poly(ethylene glycol) as template, tetraethyl orthosilicate as silica source and 1, 3, 5-trimethylbenzene as pore-expanding agent to prepare nano mesoporous MCF in acidic medium. The MCF mesoporous material was characterized by powder X-ray diffraction (XRD), infrared (IR) spectroscopy, low temperature nitrogen adsorption-desorption at 77?K, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The effects of pH, temperature, adsorbent dosage, cefalexin dosage and contact time on the immobilization of cefalexin were studied. Under the optimized conditions, MCF has the best effect on the drug immobilization. The maximum immobilization amount of cefalexin in MCF nano-mesoporous material is 498.8?mg/g. The behavior of adsorption of cefalexin by MCF belongs to multilayer heterogeneous adsorption, which accords with the Freundlich adsorption isotherm. In the adsorption process, all the ΔH⁰, ΔS⁰ and Gibbs free energy change ΔG⁰ are less than zero, indicating that the adsorption process is spontaneous, exothermic entropy decreasing reaction at ordinary temperature. Kinetic investigation showed that the adsorption process of cefalexin on MCF belongs to the pseudo-second-order kinetic process. The release laws of composite material cephalexin-MCF in the simulated body fluid, gastric and intestinal fluid were investigated, respectively. The maximum cumulative release rate in simulated body fluid was 99.4% at 18?h. The maximum cumulative release rate in the simulated gastric juice was 48.7% at 6?h and in the simulated intestinal fluid the maximum cumulative release rate of 61.9% was achieved at 8?h. These release processes satisfy the zero-order ordered kinetic process.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Synthesis and Properties of Oval‐Shaped Iron Oxide/Ethylene Glycol Mesostructured Nanosheets

We have demonstrated a new and facile bottom‐up protocol for the effective synthesis of oval‐shaped iron oxide/ethylene glycol (FeO_x/EG) mesostructured nanosheets. Deprotonated ethylene glycol molecules are intercalated into iron oxide layers to form an interlayer distance of 10.6 Å. These materials display some peculiar magnetic properties, such as the low Morin temperature T_M and ferromagnetism below this T_M value. CdSe/ZnS nanoparticles can be loaded onto these mesostructured nanosheets to produce nanocomposites that combine both magnetic and fluorescence functions. In addition, iron oxide/propanediol (or butanediol) mesostructured materials with increased interlayer distances can also be synthesized. The developed synthetic strategy may be extended toward the creation of other ultrathin mesostructured nanosheets.     

Buildup mechanism of carboxymethyl cellulose and chitosan self-assembled films

Films with different numbers of layers have been built by alternating the adsorption of carboxymethyl cellulose (CMC) and chitosan (CHI) at different pH levels. The adsorption process was recorded by quartz crystal microbalance (QCM). The results showed that under all pH conditions considered, the growth of the films is nonlinear. The film construction performed at pH 4.0 (preferred assembly pH) with different numbers of bilayers (CMC/CHI as one bilayer) was also observed step by step by atomic force microscopy (AFM). Comparing the growth process from QCM with the surface morphological changes from AFM shows the existence of an inhomogeneous structure for the first nine bilayers, and, after a coalescence of islands, an increase in the number of bilayers was demonstrated. The possible growth mechanism was also evaluated.     

一种基于STM32的NAND flash的块分配框架设计

STM32对大容量数据文件存储与管理问题可通过NAND flash来解决。而NAND flash的高效管理需要文件系统参与。NAND flash有特殊的块读写及擦除机制,一般的嵌入式文件系统组织结构并不完全兼容NAND flash。针对NAND flash的特点兼顾STM32的资源承受力要提出新的NAND flash块分配框架,框架通过块分配槽这种数据结构,在不使用块分配表与垃圾表的情况下,实现了NAND flash均衡负载与垃圾块的回收;同时通过节点分配栈与文件节点表的配合来提高STM32对文件的读写速度,空间利用率和系统性能。仿真实验和计算结果表明该块分配框架可有效提高NAND flash块的均衡负载与节省RAM空间。