Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

铝酸钠和含硅铝酸钠溶液结构和性质的研究

本文通过对铝酸钠和硅铝酸钠溶液的红外光谱、拉曼光谱、粘度、表面张力、丁达尔现象和聚沉等光谱和物理化学性质的研究测定,分析了硅在铝酸钠溶液中的行为.认为硅主要是取代Al-O-Al结构中的Al,形成Al-O-Si结构和Al-O-Si-O-Al-O结构等多种形式硅氧铝键以及由氢键相连的大分子结构.这种结构直接影响其物理化学性质,表现为随硅含量增加表面张力增加,粘度上升,具有丁达尔现象等.说明含硅铝酸钠溶液中存在大分子的胶性基团,属于无机高分子溶液,这种网络状"大分子"结构是硅铝酸钠溶液稳定的原因.     

A Tail Measure With Variable Risk Tolerance: Application in Dynamic Portfolio Insurance Strategy

Methodology and Computing in Applied Probability - Risk measures for tail risk have an important application in the dynamic portfolio insurance strategies. We propose a new risk measure called...     

Involvement of human small fragment nuclease in the resistance of human cells to UV-C-induced cell death

Human small fragment nuclease (Sfn) is one of the cellular proteins that were reported to degrade small, single-stranded DNA and RNA. However, the biological role of Sfn in cellular response to various stressors such as UV-C (mainly 254 nm wavelength ultraviolet ray) remains unclear. We have examined whether modulation of human SFN gene expression affects cell survival capacity against UV-C-induced cell death, analyzing colony survival ability in UV-C-sensitive human RSa cells treated with short double-stranded RNA (siRNA) specific for SFN messenger RNA (mRNA). The expression levels of SFN mRNA in the siRNA-treated RSa cells decreased to about 15% compared with those in the control siRNA-treated cells. The siRNA-treated RSa cells showed lower colony survival and higher activity of caspase-3 after UV-C irradiation than the control siRNA-treated RSa cells. Furthermore, the removal capacity of cyclobutane pyrimidine dimers (CPD) in the siRNA-treated RSa cells decreased compared with the control siRNA-treated RSa cells. There was no difference in the colony survival and CPD removal capacity after UV-C irradiation between the control siRNA-treated RSa cells and mock-treated RSa cells. These results suggest that SFN expression is involved in resistance of RSa cells to UV-C-induced cell death through the roles it plays in the DNA repair process.     

阳极溶出伏安法测定塑料制品中的铜和铅

铅等重金属的化合物常用作塑料的稳定剂。由于铅等重金属对人体有害,因此研究塑料制品中铅、铜含量对人体健康的影响是环境卫生学急待解决的问题。本文介绍的方法中,0.5M HCl既作为干法灰化塑料残渣的溶解液,同时又是测定铜、     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

Solid-phase extraction of iron(III) with an ion-imprinted functionalized silica gel sorbent prepared by a surface imprinting technique

A new Fe(III)-imprinted amino-functionalized silica gel sorbent was prepared by a surface imprinting technique for selective solid-phase extraction (SPE) of Fe(III) prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Fe(III). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Fe(III) was 25.21 and 5.10 mg g⁻¹, respectively. The largest selectivity coefficient of the Fe(III)-imprinted sorbent for Fe(III) in the presence of Cr(III) was over 450. The relatively selective factor (α_r) values of Fe(III)/Cr(III) were 49.9 and 42.4, which were greater than 1. The distribution ratio (D) values of Fe(III)-imprinted polymers for Fe(III) were greatly larger than that for Cr(III). The detection limit (3σ) was 0.34 μg L⁻¹. The relative standard deviation of the method was 1.50% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08301 and GBW 08303), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace iron in plants and water samples with satisfactory results.