A new perspective for effect of S and Cu on the photocatalytic activity of S,Cu-codoped nano-TiO2 under visible light irradiation

Sulfur and copper codoped TiO₂ nanoparticles were prepared by sol-hydrothermal process. And the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectra analysis, scanning electron microscopy, Brunauer Emmett Teller analysis, UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectra and X-ray fluorescence analysis. It was found that the S, Cu-codoped TiO₂ became amorphous with the increase of Cu content, and copper on the surface of TiO₂ existed in the oxidation state of Cu(II) while S in the form of S⁶⁺ species. And the codoped particles had higher surface area, smaller particle size, stronger spectral response in visible region compared with pure TiO₂. The effects of doping amount in a wide range, catalyst dosage, and recycle on the photocatalytic activity of the codoped catalysts were investigated with Acid Orange 7 as the model compound under visible light illumination (λ > 447 nm). The results showed that S (2.0 %), Cu (5.0 %) codoped TiO₂ had the highest visible light photocatalytic activity and good reusability performance. The kinetic study showed that this photocatalytic process coincided with the Langmuir–Hinshelwood pseudo first order reaction model.     

水浴加热密闭溶样石墨炉原子吸收光谱法测定化探样品中的痕量金

以王水、氟化钾、Fe3+溶液为溶剂,对化探样品进行水浴加热分解1.5 h,经泡沫塑料吸附后,于90℃以上硫脲溶液中解吸20 min,然后采用石墨炉原子吸收光谱仪测定其中的金含量。对仪器分析条件进行了优化。金的质量分数在0.1~100.0 ng/g范围内与吸光度呈良好的线性,线性相关系数r2=0.999 3,检出限为0.100 ng/g。该方法对金标准物质测定结果的相对标准偏差为5.96%~9.25%(n=12),对国家一级标准物质进行分析,测定结果与标准值相符合。该方法满足1∶50 000化探样品中痕量金的分析要求。     

Synthesis of 2,3-dihydroquinazolin-4(1H)-ones in the presence of Fe3O4@nano-cellulose–OPO3H as a bio-based magnetic nanocatalyst

In this research, we have used Fe₃O₄@nano-cellulose–OPO₃H as magnetic bio-based nanocatalyst for the synthesis of 2,3-dihydroquinazolin-4(1H)-ones via condensation of 2-aminobenzamide and different aldehydes. The major advantages of the present methodology are good yields, ecofriendly catalyst, and easy workup.     

Metal–Organic Gels from Silver Nanoclusters with Aggregation-Induced Emission and Fluorescence-to-Phosphorescence Switching

Luminescent metal nanoclusters (NCs) are emerging as a new class of functional materials that have rich physicochemical properties and wide potential applications. In recent years, it has been found that some metal NCs undergo aggregation-induced emission (AIE) and an interesting fluorescence-to-phosphorescence (F-P) switching in solutions. However, insights of both the AIE and the F-P switching remain largely unknown. Now, gelation of water soluble, atomically precise Ag₉ NCs is achieved by the addition of antisolvent. Self-assembly of Ag₉ NCs into entangled fibers was confirmed, during which AIE was observed together with an F-P switching occurring within a narrow time scale. Structural evaluation indicates the fibers are highly ordered. The self-assembly of Ag₉ NCs and their photoluminescent property are thermally reversible, making the metal–organic gels good candidates for luminescent ratiometric thermometers.     

Amphibious sensor of temperature and refractive index based on D-shaped photonic crystal fibre filled with liquid crystal

ABSTRACT

A D-shaped photonic crystal fibre filled with liquid crystal was demonstrated as an amphibious sensor for detection of both temperature and refractive index, when combined with plasma materials. Specifically, the optical component is implanted into a complete optical system ensuring modulation of the external electric field. When the refractive index of the external solution changes from 1.0 to 1.6, the y-polarised mode has a loss spectrum with a wavelength sensitivity of up to 2275 nm/RIU, and the corresponding amplitude sensitivity is ?88.2RIU^?1. When the perceived temperature changes from 15°C to 50°C, the temperature of the sensor is correspondingly expressed as the maximum wavelength sensitivity of 9.09 nm/°C and the amplitude sensitivity of ?0.311°C^?1. In addition, the actual micro-operation processes have been studied in detail, such as polishing depth, coating thickness and coating method. This provides practical ideas for real-time sensing analysis that requires harsh environments.     

Heating performance enhancement for a road unit by using sectorial-finned pipe

Journal of Thermal Analysis and Calorimetry - This study proposes a sectorial-finned pipe in the hydronic road heating system with a three-dimensional road model to enhance the road heating...     

Thermal performances of porous snow by a hydronic heating system at different weather conditions

Journal of Thermal Analysis and Calorimetry - The snow on the road in the cold regions is easy to cause slippery conditions, which are dangerous for vehicles and people. To remove the slippery...     

Photoactivated Fluorescence Enhancement in F,N‐Doped Carbon Dots with Piezochromic Behavior

Photoactivation in CdSe/ZnS quantum dots (QDs) on UV/Vis light exposure improves photoluminescence (PL) and photostability. However, it was not observed in fluorescent carbon quantum dots (CDs). Now, photoactivated fluorescence enhancement in fluorine and nitrogen co‐doped carbon dots (F,N‐doped CDs) is presented. At 1.0 atm, the fluorescence intensity of F,N‐doped CDs increases with UV light irradiation (5 s–30 min), accompanied with a blue‐shift of the fluorescence emission from 586 nm to 550 nm. F,N‐doped CDs exhibit photoactivated fluorescence enhancement when exposed to UV under high pressure (0.1 GPa). F,N‐doped CDs show reversible piezochromic behavior while applying increasing pressure (1.0 atm to 9.98 GPa), showing a pressure‐triggered aggregation‐induced emission in the range 1.0 atm–0.65 GPa. The photoactivated CDs with piezochromic fluorescence enhancement broadens the versatility of CDs from ambient to high‐pressure conditions and enhances their anti‐photobleaching.     

Highly Enantioselective Synthesis of Propargyl Amide with Vicinal Stereocenters through Ir‐Catalyzed Hydroalkynylation

Chiral propargyl amines are valuable synthetic intermediates for the preparation of biologically active compounds and functionalized amines. Catalytic methods to access propargyl amines containing vicinal stereocenters with high diastereoselectivity are particularly rare. We report an unprecedented strategy for the synthesis of enantioenriched propargyl amines with two stereogenic centres. An iridium complex, ligated by a phosphoramidite ligand, catalyzes the hydroalkynylation of β,β‐disubstituted enamides to afford propargyl amides in a highly regio‐, diastereo‐, and enantioselective fashion. Stereodivergent synthesis of all four possible stereoisomers was achieved using this strategy.     

Reversibly Switching the Charge State and Adsorption Location of A Single Potassium Atom on Ultrathin CuO Films

Potassium (K) cations are spontaneously formed upon thermal deposition of low‐coverage K onto an ultrathin CuO monolayer grown on Cu(110) and they were explored by low‐temperature scanning tunneling microscopy (STM) and X‐ray photoemission spectroscopy. The formed K cations are highly immobile and thermally stable. The local work function around an individual K cation decreases by 1.5±0.3 eV, and a charging zone underneath it is established within about 1.0 nm. The cationic and neutral states of the K atom are switchable upon application of an STM bias voltage pulse, which is simultaneously accompanied by an adsorption site relocation.