Synthesis, characterization, photoluminescence and electroluminescence properties of new 1,3,4-oxadiazole-containing rhenium（I） complex Re（CO）3（Bphen）（PTOP）

A new 1,3,4-oxadiazole-contanining rhenium(I) complex,with the formula [Re(CO)_3(Bphen)(PTOP)],(Bphen=bathophe- nardine,PTOP=4-(5-p-tolyl-1,3,4-oxadiazd-2-yl)pyridine),is synthesized and characterized by elemental analysis,IR,~1H NMR, UV-vis and luminescence spectroscopy.The double-layer electroluminescence devices based on the Re(I) complex have been fabricated by spin-coating technique.The turn-on voltage,maximum efficiency,and brightness for green emission obtained from the devices are 9V,2.1cd/A and 165cd/m~2,respectively.     

HYDROPHOBICITY OF CONTAMINATED SILICONE RUBBER SURFACES

Silicone rubber (SIR) shows superior performance when used outdoors, but its surface can be transformed frominherently hydrophobic to hydrophilic by the adsorption of contaminants. Al(OH)_3, Al_2O_3, quartz powder and active carbonwere selected as authentic contaminants. Hydrophobicity of the surface was determined using contact angle measurement.The results indicate that the adsorbability of the contaminants can strongly affect the hydrophobicity of contaminated SIRsurface. The increasing rate of contact angle of specimens contaminated by Al(OH)_3 was much faster than that by Al_2O_3 andquartz due to the adsorption of migrated low molecular weight (LMW) polydimethylsiloxanes. Specimens contaminated byactive carbon could achieve sunde hydrophobicity within 15 min because active carbon has high adsorbability. Surfaces ofcontaminated ultrapure SIR, polytetrafluoroethylene (PTFE) and glass remain hydrophilic because they contain no mobileLMW components. The addition of oligomeric polydimethylsiloxanes has little effect on the hydrophobicity of contaminantscovered on SIR surface.     

混合三烃基锡衍生物的研究：X.甲基二环己基锡二硫代磷酸酯的合成及生…

合成了１０种甲基二环己基锡－Ｏ，Ｏ－二烃基二硫代磷酸酯，利用ＩＲ，ＮＭＲ，ＭＳ及元素分析确证了化合物的结构，生物活性测试结果表明，这类化合物具有较高的杀螨和除草活性。     

从自模式曲线分辨到渐进类因子分析法

本文对自模式曲线分辨法的发展作了简要回顾，其中特别对近来来迅速发展的一类用于色谱波谱联用仪产生的二维分析数据的渐进类分析法作了详尽的讨论。这些新化学计量学方法的涌现，对复杂的未知分析体系的定性定量分析，将带来深刻的变化。     

A facile sulfonylation method enabling direct syntheses of per(2-O-sulfonyl)-β-cyclodextrins

Cs₂CO₃ was found to efficiently catalyze the reaction of β-cyclodextrin and N-tosylimidazole. Stirring β-cyclodextrin and N-tosylimidazole in 1/1.2 molar ratio in DMF in the presence of catalytic amount of Cs₂CO₃ at rt for 1.5 h afforded 2^A-mono(O-tosyl)-β-cyclodextrin in 32% yield. The 2^A,2^B-, 2^A,2^C- and 2^A,2^D-ditosylates were isolated in ca. 6-7% yields, respectively, when β-cyclodextrin and N-tosylimidazole were used in 1/2.5 molar ratio. The charge of excess (10 equiv) of N-tosylimidazole ensured a one-step direct (protection-free) synthesis of the per(2-O-tosyl)-β-cyclodextrin in 5% isolated yield. N-(m-Nitrobenzenesulfonyl)imidazole even allowed a much faster access to the corresponding persulfonate in only 1 h reaction.     

Separation and identification of perchlorinated polycyclic aromatic hydrocarbons by high-performance liquid chromatography and ultraviolet absorption spectroscopy

High-performance liquid chromatography (HPLC) was coupled with ultraviolet absorption spectroscopy (UV) for the simultaneous separation and identification of a series of perchlorinated polycyclic aromatic hydrocarbons, such as perchlorobenzene (C6Cl6), perchloronaphthalene (C10Cl8), perchlorobiphenyl (C12Cl10), perchloroanthracene (C14Cl10), perchlorophenanthrene (C14C10), perchloroacenaphthylene (C12Cl8), perchloropyrene (C16Cl10) and perchlorofluoranthene (C16Cl10). HPLC was performed on an ODS column using methanol-hexane (80:20) as mobile phase at a flow-rate of 1.0 ml/min. UV absorption spectra of the elutes were detected in the region of 210-350 nm.     

不可逆电极过程方波伏安法动力学研究 Ⅰ.平行催化体系

本文报道了在不可逆电极过程的强催化体系中，当采用快速方波扫描时，正、逆向电流将出现峰形。依据实验结果，提出了“迁出－进入”的等浓度面理论模型，推导了并讨论了电流方程式。结果表明，文中提出的理论能较好地说明实验结果。     

An Overview of Molecular Packing Mode in Two‐Dimensional Organic Nanomaterials via Supramolecular Assembly

Two‐dimensional (2D) organic nanomaterials are attracting increasing research interest and expected to be the ideal candidate for future‐ proofed flexible electronics and biotechnologies. Owing to the complex molecular structures and multiple intermolecular interactions in organic systems, deeper understanding of rational molecular design and assembly principles is urgently required. In this review, a collection of molecular packing mode in the 2D organic nanomaterials via supramolecular assembly is presented, so as to help explicit the relationship among molecular structures, supramolecular interactions and molecular packing motifs in 2D assembly systems. We also provide a rational and accessible schematic model to demonstrate several typical kinds of molecular packing motifs for the prediction of the 2D morphology.     

Ultrasensitive small molecule fluorogenic probe for human heparanase

Heparanase (HPA) is a critical enzyme involved in the remodeling of the extracellular matrix (ECM), and its elevated expression has been linked with diseases such as various types of cancer and inflammation. The detection of heparanase enzymatic activity holds tremendous value in the study of the cellular microenvironment, and search of molecular therapeutics targeting heparanase, however, no structurally defined probes are available for the detection of heparanase activity. Here we present the development of the first ultrasensitive fluorogenic small-molecule probe for heparanase enzymatic activity via tuning the electronic effect of the substrate. The probe exhibits a 756-fold fluorescence turn-on response in the presence of human heparanase, allowing one-step detection of heparanase activity in real-time with a picomolar detection limit. The high sensitivity and robustness of the probe are exemplified in a high-throughput screening assay for heparanase inhibitors.

Heparanase, a critical enzyme involved in the remodeling of the extracellular matrix, activates a disaccharide probe HADP to give a strong fluorescence signal.     

Separation and determination of seven fluoroquinolones by pressurized capillary electrochromatography

In this paper, pressurized CEC was used for the separation and determination of seven fluoroquinolones (FQs). The effect of different experimental conditions, such as the concentration and pH of the buffer, the organic modifier concentration, the surfactant and ion-paring agents added to the electrolyte, and applied voltage were studied. All the seven FQs were baseline separated using mobile phase containing 27% v/v ACN, 5 mmol/L Na2HPO4 buffer (pH 4.0 adjusted using citric acid), 11 mmol/L SDS, and 0.01% TEA v/v at detection wavelength of 287 nm and at an applied voltage of -10 kV. The calibration curves were linear (r>0.9991) over a concentration range of 1.0-50.0 mg/L for norfloxacin (NFLX); 2.5-50.0 mg/L for fleroxacin (FLX), ciprofloxacin (CPFX), and lomefloxacin (LMX); and 5.0-50.0 mg/L for enoxacin (ENX), ofloxacin (OFLX), and gatifloxacin (GFLX). The detection limits (S/N = 3) for ENX, OFLX, FLX, NFLX, CPFX, LMX, and GFLX were 0.5, 0.8, 0.4, 0.2, 0.4, 0.5, and 1.0 mg/L, respectively. The method is simple, rapid, and reproducible. It was successfully applied to the analysis of fish muscle samples spiked with FQs. Mean recoveries ranged from 81.6 to 97.6%.