Preparation of Pt–CeO2/MWNT nano-composites by reverse micellar method for methanol oxidation

We report the preparation of Pt–CeO₂ nanoparticles on the multi-walled carbon nanotubes (MWNTs) by a reverse micellar method. Transmission electron microscopy (TEM) analysis indicated that well-dispersed small Pt–CeO₂ nanoparticles were formed on the MWCNTs. X-ray diffraction (XRD) analysis confirmed the formation of the Pt–CeO₂ nanoparticles on the MWNTs. Cyclic voltammetry (CV) results demonstrated that the Pt–CeO₂/MWNT exhibited a higher methanol oxidation than did the Pt/MWNT catalyst. The CO stripping test showed that CeO₂ can make CO stripped at a lower potential, which is helpful for CO and methanol electro-oxidation.     

Characteristics of holographic scattering and its application in determining kinetic parameters in PQ-PMMA photopolymer

This paper characterizes holographic scattering and demonstrates its application in determining the kinetic parameters in materials with high transmittance and strong holographic scattering like phenanthrenequinone doped poly (methyl methacrylate) (PQ-PMMA). We define a polymerization rate parameter which can be determined by the temporal evolution of the scattering losses. Two basic kinetic parameters, quantum yield and molar-absorption coefficient, are obtained by nonlinear fitting the curve of the polymerization rate parameter as a function of the thickness, which are 1.9×10⁻⁶ mol/einstein and 2.1×10⁴ cm²/mol for a wavelength of 532 nm respectively. These results improve the understanding of photochemical behaviors and allow us to describe the grating formation in the photopolymer reasonably.     

掺锡As2S8薄膜光折变效应及其在条波导制备中的应用研究

实验研究了Sn₁As₂₀S₇₉非晶态半导体薄膜的光折变效应及其膜厚变化的现象,归纳了沉积态样品、退火态样品和光饱和态样品的实验规律,提出和采用紫外光激励的方法试制了Sn₁As₂₀S₇₉条形波导,632.8 nm波长导模激励显示该波导具有良好的导波特性. 关键词： 光波导技术 硫属化合物玻璃 光阻断效应 光折变效应     

Guided transmission of oxygen ions through Al2O3 nanocapillaries

The transmissions of oxygen ions through Al2O3 nanocapillaries each 50 nm in diameter and 10 μm in length at a series of different tilt angles are measured,where the ions with energies ranging from 10 to 60 keV and charge states from 1 up to 6 are involved.The angular distribution and the transmission yields of transported ions are investigated.Our results indicate both the existence of a guiding effect when ions pass through the capillary and a significant dependence of the ion transmission on the energy and the charge state of the ions.The guiding effects are observed to be enhanced at lower projectile energies and higher charge states.Meanwhile,the results also exhibit that the transmission yields increase as the tilt angle decreases at a given energy and charge state.     

Phase transition,dielectric and piezoelectric properties of NaNbO3–Bi0.5Li0.5TiO3 lead-free ceramics

Lead-free ceramics (1?x)NaNbO₃–xBi_0.5Li_0.5TiO₃ have been fabricated by an ordinary sintering technique, and their electric properties and temperature characteristics have been studied. All the ceramics possess a perovskite structure with orthorhombic symmetry, indicating that (Bi_0.5Li_0.5)TiO₃ diffuses into NaNbO₃ lattices to form a new solid solution. A low (Bi_0.5Li_0.5)TiO₃ doping level transforms the NaNbO₃ ceramics from antiferroelectric to ferroelectric. The ceramics with x ≤ 0.075 are normal ferroelectric, and the ferroelectric-paraelectric phase become diffusives with the doping level of Bi_0.5Li_0.5TiO₃ increasing. As x increases, the Curie temperature of the ceramics decreases linearly, while the relative permittivity ε_r increases. 0.925NaNbO₃–0.075(Bi_0.5Li_0.5)TiO₃ ceramic exhibits the relatively large piezoelectric constant (d₃₃ = 58 pC/N), high Curie temperature (T_C = 228 °C) and good temperature stability, suggesting that the ceramics are one of new possible candidates for lead-free piezoelectric materials.     

Simulation and fabrication of carbon nanotubes field emission pressure sensors

A novel field emission pressure sensor has been achieved utilizing carbon nanotubes (CNTs) as the electron source. The sensor consists of the anode sensing film fabricated by wet etching process and multi-wall carbon nanotubes (MWNTs) cathode in the micro-vacuum chamber. MWNTs on the silicon substrate were grown by thermal CVD. The prototype pressure sensor has a measured sensitivity of about 0.17-0.77 nA/Pa (101-550 KPa). The work shows the potential use of CNTs-based field-emitter in microsensors, such as accelerometers and tactile sensors.     

Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films

Hexamethyldisilazane (HMDS) vapor treatment of plasma-damaged nanoporous organosilicate thin films has been studied as a function of treatment temperature in this work. Although, the HMDS vapor treatment facilitated incorporation of methyl (CH₃) groups subsequent to the removal of free hydroxyl (OH) groups in the damaged films at treatment temperature as low as 55 °C, the bonded OH groups were not removed. More significantly, detailed analysis of the results reveals that HMDS vapor modified only the surface of the plasma-damaged samples and not the entire film as expected. This is attributed to the formation of a thin solid layer on the surface, which effectively prevents penetration of HMDS vapors into the bulk. The Fourier transform-infrared (FT-IR) absorption and dielectric constant measurements confirm that the vapor treatment assists only partial curing of the plasma-damaged films. Alternative processes of curing the films with HMDS dissolved in supercritical carbon dioxide (SCCO₂) as a medium of reaction in static and pulsed modes were also attempted and the results are presented in this paper.     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

Preparing polymer brushes on polytetrafluoroethylene films by free radical polymerization

Films of polytetrafluoroethylene (PTFE) were exposed to sodium naphthalenide (Na/naphtha) etchant so as to defluorinate the surface for obtaining hydroxyl functionality. Surface-initiators were immobilized on the PTFE films by esterification of 4,4′-azobis(4-cyanopentanoic acid) (ACP) and the hydroxyl groups covalently linked to the surface. Grafting of polymer brushes on the PTFE films was carried out by the surface-initiated free radical polymerization. Homopolymers brushes of methyl methacrylate (MMA) were prepared by free radical polymerization from the azo-functionalized PTFE surface. The chemical composition and topography of the graft-functionalized PTFE surfaces were characterized by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance (ATR) FT-IR spectroscopy and atomic force microscopy (AFM). Water contact angles on PTFE films were reduced by surface grafting of MMA.