2-呋喃甲硫醇修饰环糊精形成互锁式螺旋柱状超分子的自组装行为

利用单-(6-氧-对甲基苯磺酰基)-β-环糊精和2-呋喃甲硫醇反应得到单修饰环糊精, 单[6-硫-6-(2-甲基呋喃)]-β-环糊精. 通过X-ray衍射分析及核磁光谱等方法研究了其在溶液和固态中形成线状超分子的分子自组装行为. 结果表明, 化合物在固态中通过呋喃基团从第二面羟基连续插入到另一个环糊精的空腔, 形成了互锁式螺旋柱状超分子, 而且在溶液中也显示了相似的自组装行为, 其键合常数K及聚合度n分别为450 mol^-1·L和1.9.     

Penta-coordinate phosphorous compounds and biochemistry

The relationship between penta-coordinate phosphorus compounds and biochemistry is briefly reviewed. Some interesting phenomena such as peptide formation, ester formation, ester exchange on phosphorus and N to O migration occur at room temperature when the amino group of amino acid is associated with phosphoryl group. Serine or threonine in conjugate of nucleo-side-amino acid could recognize different nucleobases. N-phosphoryl Histine and Ser-His dipep-tide could cleavage nucleic acid, protein and ester in neutral medium. It is found that the above phenomena all undergo penta-coordinate intermediate of phosphorus atom, which is proposed as the key factor to determine their activities.     

Thermodynamic Properties of the Ternary System Potassium Bromide + Lithium Bromide + Water at 25°C

Activity coefficients of potassium bromide in aqueous mixtures of potassium bromide and lithium bromide were determined by emf measurement at 25°C and at six ionic strengths from 0.1 to 2.5 mol·kg^-1. The experimental data were fitted using the Scatchard–Rush–Johnson and Pitzer models. The osmotic coefficients, excess Gibbs energies of mixing, and activity coefficients of lithium bromide in aqueous mixtures were calculated using Pitzer mixing parameters obtained in this work.     

硅酸钠与有机硅氧烷前驱体自组装杂化硅基中孔材料

采用有机硅氧烷(RTES)与硅酸钠(Na2SiO3)共水解缩聚合成有机官能化的MSU型硅基中孔材料.考察了合成体系pH值对材料织构性能的影响以及不同有机硅氧烷与硅酸钠在中性条件下的自组装行为.发现在中性条件下，加入NaF可以有效避免带有较小有机基团的有机硅氧烷进入材料孔壁的可能性，而且合成体系的pH值对材料的孔径有一定的调控作用.     

HDDR过程中三元和多元Nd-Fe-B合金磁畴结构的MFM研究

用磁力显微镜研究了三元Nd-Fe-B合金在HDDR过程的不同阶段(铸态、不充分吸氢歧化、充分吸氢歧化和脱氢再复合)的破畴结构。在铸态样品表面清楚地观察到了易磁化轴互相垂直的柱状晶表面的两类磁畴图型。当样品不充分吸氢歧化和充分吸氢歧化时，破畴结构明显发生变化，反映了Nd-Fe-B的分解产物NdH2，α-Fe和Fe2B及其微晶结构的变化。脱氢再复合后形成的微晶的磁畴结构则表明样品保留了铸态样品柱状晶的构型。此外，还对比研究了多元Nd-Fe-B合金在HDDR过程中的磁畴结构，并根据微磁结构分析，指出过量的Ga元素添加可抑制Nd2(Fe，M)14B相的吸氢歧化，从而导致相应HDDR粘结磁体性能降低。     

Crystal Structures of Cs+-Crown Ether Complexes Containing Polynuclear Mercury Iodide Anions

Reactions of CsI and HgI₂ with benzo-15-crown-5 (B15C5) and 15-crown-5 (15C5) in an ethanol-acetone mixture produced [Cs(B15C5)₂]₂[Hg₂I₆] (1) and {[Cs(15C5)]₂[Hg₂I₆]}_n (2), respectively. The structures of the two complexes are quite different. Molar ratios of Cs⁺ : crown ether are 1 : 2 in 1 and 1 : 1 in 2. Complex 1 consists of two Cs(B15C5) ₂ ⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ lies between the two crown-5 ligands, resulting in a sandwich-type cation. Cationic Cs(B15C5) ₂ ⁺ and anionic Hg₂I ₆ ^2- are linked together by electrostatic interactions and the complex 1 is an ion pair compound. Complex 2 consists of infinite [Cs(15C5)]₂[Hg₂I₆] units. Each structural unit contains two Cs(15C5)⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ is coordinated by five oxygen atoms of 15C5, three iodine atoms of Hg₂I ₆ ^2- , and an iodine atom of Hg₂I ₆ ^2- in an adjacent structural unit. The interactions between the Cs⁺ of Cs(15C5)⁺ and an I^– in Hg₂I ₆ ^2- from adjacent structural units polymerize the complex 2, resulting in a one-dimensional network structure. The anions of Hg₂I ₆ ^2- in both complexes are similar. The two mercury atoms are linked through two bridging iodine atoms and each mercury is also coordinated by two terminal iodines. Crystal data for 1: space group P2₁/c (No. 14), a = 12.253(4), b = 20.945(7), c = 16.110(6) Å, = 111.0(1)°, V = 3860 ų, Z = 4, R = 0.082 (R _w = 0.089). Crystal data for 2: space group P2₁/c (No. 14), a = 12.157(4), b = 8.546(4), c = 20.666(6) Å, = 91.54(3)°, V = 2146 ų, Z = 4, R = 0.034 (R _w = 0.048).     

L—组氨酸和色氨酸三元体系中稀土（Ⅲ）,钙（Ⅱ）的化学形态

在模拟生理条件下（３７℃,Ｉ＝０．１５ｍｏｌ／ＬＮａＣｌ）,用ｐＨ电位滴定与计算机模拟计算相结合的方法研究了镨（Ⅲ）、钆（Ⅲ）、铽（Ⅲ）、镱（Ⅲ）４ｔｋｈ ｔｑｄ ｆｆｆｆｙｂ ｂｂ ｔ ｑｇｈ （Ⅱ）、锌（Ⅱ）离子在Ｌ－组氨酸、色氨酸三元体系中的化学形态。讨论了稀土（Ⅲ）、钙（Ⅱ）和锌（Ⅱ）的物种分布特点。     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

分子印迹手性整体柱的制备及对非对映异构体的分离

 采用原位分子印迹技术 ,单步制备了一种辛可宁印迹的手性整体柱。为了提高柱效和选择性 ,选择了相对低极性的甲苯 /十二醇复合致孔体系。在等度及梯度洗脱条件下 ,非对映异构体辛可宁与辛可尼丁被完全分离。等度洗脱中相对较宽的峰可以在梯度洗脱中得到改善。同时考察了流动相中醋酸浓度、流速以及温度对分离的影响。由于柱中存在大的流通孔 ,大大降低了分离过程中的柱压降 ,从而使这种柱能够在相对高的流速下使用。提高温度可以提高分离因子 ,在 60℃获得最大分离因子 5 40。     

金属卤化物钙钛矿光电材料和器件

2009年ABX₃钙钛矿晶型的甲胺铅卤CH₃NH₃PbX₃(X=I、Br、Cl)钙钛矿材料首次应用于太阳能电池,但初始报道效率低、稳定性差。2012年后,可溶液法制备的钙钛矿太阳能电池凭借其吸光系数高、激子结合能低等优点,迅速表现出低成本和高效率的突出优势,并在光电器件等交叉领域具有很强的应用潜力。因此,钙钛矿太阳能电池被Science杂志评为2013年度国际十大科技进展,是化学和材料领域特别是光伏领域新兴的变革性技术之一。钙钛矿太阳能电池材料与器件的发展一直面临大面积、高效率、稳定性和环境友好性等挑战,对应的是钙钛矿晶体可控生长、缺陷钝化、器件优化材料稳定性和铅毒性等科学问题。