高压下的固态反应非晶化

 本文首次把压力引入固态反应非晶化过程，报道了Ni₅₀Ti₅₀多层膜在不同压力下低温退火后的X射线衍射结果。根据压力对反应热力学及动力学过程可能产生的影响，作者对所得结果作出分析，认为在2 GPa以上压力下，反应未能进行的原因是高压抑制了原子的低温快速扩散。提出在Ni-Ti系固态反应非晶化中，受抑制的扩散过程符合薄膜扩散的B类动力学模型。     

Octanuclear zinc(II) and cobalt(II) clusters produced by cooperative tetrameric assembling of oxime chelate ligands

We have synthesized an octanuclear zinc(II) cluster [L4Zn8(H2O)3] by the complexation of 3-hydroxysalamo (H4L) with zinc(II) acetate. The complex crystallizes in the triclinic system, space group P, with unit cell parameters a = 18.233(10) A, b = 20.518(11) A, c = 21.366(11) A, alpha = 98.7557(2) degrees, beta = 99.191(11) degrees, gamma = 108.309(10) degrees, and Z = 4. The crystallographic analysis revealed the S4 symmetrical assembling of four ligands and that the tetrameric complex has three water molecules in an unsymmetrical fashion. Spectroscopic analysis of the complex strongly suggests that the octanuclear cluster also exists in solution and maintains a conformation similar to that in the crystal structure, although exchange of the coordinating water molecules presumably takes place. In addition, the formation process of the octanuclear complex is highly cooperative. A high coordinating ability of the [(salamo)Zn] unit as well as the catecholato2- moieties probably stabilizes the octanuclear assembly and makes the complexation process cooperative. The corresponding octanuclear cobalt(II) cluster [L4Co8(EtOH)3] was prepared in a similar manner. Complex [L4Co8(H2O)2X] (X = H2O or EtOH) was obtained by the recrystallization from chloroform/hexane. The complex crystallizes in the triclinic system, space group P, with unit cell parameters a = 15.2359(10) A, b = 16.9625(12) A, c = 18.9325(13) A, alpha = 101.9710(10) degrees, beta = 105.5410(10) degrees, gamma = 97.1290(10) degrees, and Z = 2. Temperature dependence of magnetic susceptibility showed a continuous decrease in the chi(M)T value with decreasing temperature, suggesting antiferromagnetic interaction among cobalt(II) ions. The magnetic susceptibility above 40 K obeys the Curie-Weiss law with a Weiss constant theta of -39 K and a Curie constant C of 19.7 cm(3) K mol(-1).     

Electrochemical lithium storage properties of desert sands

SiO₂ is one of the most promising lithium storage materials for lithium-ion batteries anodes due to its low cost, good environmental compatibility, low working voltage, and high-specific capacity. In this work, the desert sands, which are rich in SiO₂, are investigated as the anode material for lithium-ion batteries. The electrochemical activation, lithium storage capacity, and cycle properties are highly dependent on the particle size distribution of sands. As the average particle sizes of sands gradually decrease, the reversible lithium storage capacity increases from 137 mAh g^?1 (several microns) to 492 mAh g^?1 (several submicrons). The 72 h-milled sands (average particle size: ~1 μm) deliver a stable lithium storage capacity of ~400 mAh g^?1 over 400 cycles with the capacity retention as high as 95%. The reason for the electrochemical activation, lithium storage capacity, and cycle properties of sands associated with their particle size distribution is also discussed.     

Large-scale boron nanowire nanojunctions and their highly-oriented arrays

One-dimensional (1D) nanostructures, such as nanotubes and nanowires, have gen-erated worldwide interest due to their nano-scale sizes, high length-to-diameter ratios, highly anisotropic properties, various unique structures, and wide technological applica-tions. 1D nanostructures are the smallest dimension structures that can be used for effi-cient transport of electrons, vacancies, and excitations, and are thus critical building blocks in the construction of nanoscale electronic and mechanic…     

Structural relaxation of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass under high pressure

Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is annealed at 573 K under 3 GPa and its structural relaxation is investigated by X-ray diffraction, ultrasonic study, compression as well as sliding wear measurements. It is found that after the ZrTiCuNiBe BMG sample was annealed under high pressure, the mechanical properties were improved. Moreover, theBMG with relaxed structure exhibits markedly different acoustic properties. These results are attributed to the fact that relaxation under high-pressure results in a microstructural transformation in the BMG.     

高压下BiPbSrCaCuO超导陶瓷材料的显微结构

 本文通过扫描电子显微镜等实验手段，研究了Bi系超导材料在不同制备条件下的显微结构，着重分析了压力下（冷压、热压）样品显微结构的变化。经过压力处理，超导晶粒的平均尺寸显著降低，气孔率大幅度减少，样品密度得以极大提高，达理论密度的90%~95%。在经冷压、热压处理的样品中可见到明显的晶粒择优取向排列，其形成机制是压力下的塑性流变以及晶粒的各向异性生长趋势。     

钛硅分子筛TS-1催化氯丙烯环氧化反应动力学研究

 摘要：研究了钛硅分子筛催化氯丙烯环氧化反应的条件及动力学行为．\r\n结果表明，以钛硅分子筛为催化剂，氯丙烯可被高选择性地氧化为环氧\r\n氯丙烷．环氧化反应速度与分子筛中骨架钛的含量及分子筛的用量呈正\r\n比关系，是一级反应．对于氧化剂H2O2，只有当c（H2O2）＜0．4mol／\r\nL时，环氧化反应为一级反应；而c（H2O2）＞1．0mol／L时，为零级反\r\n应．对于氯丙烯，随着其浓度的变化，环氧化反应的级数在1和0之间．\r\n然而，只有当氯丙烯浓度很高时，环氧化反应的级数才有明显的降低．\r\n根据实验结果和Eley－Rideal单分子吸附方程，提出了氯丙烯环氧化反\r\n应的动力学模型．\r\n关键词：钛硅分子筛，氯丙烯，过氧化氢，环氧化，环氧氯丙烷，反应\r\n动力学     

纳米碳管的制备及其在化学电源中的应用

本文介绍了纳米碳管制备技术的最新研究成果，并对其嵌锂行为，储氢及电催化性能进行了重点讨论，纳米碳管作为一种新型的纳米电极材料，有可能在锂离子电池，镍氢电池，燃料电池等化学电源中得到广泛的应用。     

钾（I）（4‘—溴苯并—15—冠—5）配合物的研究

合成了两种新型的固体配合物，其组成为Ｋ（ＢｒＢ１５Ｃ５）Ｘ（Ｘ＝ＮＣＳ＾－或Ｐｉｃ＾－）．钾（Ｉ）离子不仅能与４＇－溴苯并－１５冠－５形成常见的１：２夹心武配合物，而且还能生成稳定的１：１型（Ｍ：Ｌ）固体配合物。