铜-钼源漏电极对非晶氧化铟镓锌薄膜晶体管性能的改善

在铜(Cu)和非晶铟镓锌氧化物(a-IGZO)之间插入30 nm厚的钼(Mo)接触层, 制备了具有Cu-Mo源漏电极的a-IGZO薄膜晶体管(TFT). Mo接触层不仅能够抑制Cu与a-IGZO有源层之间的扩散, 而且提高了Cu电极与玻璃基底以及栅极绝缘层的结合强度. 制备的Cu-Mo结构TFT与纯Cu 结构TFT相比, 具有较高的迁移率(～9.26 cm²·V^-1·s^-1)、更短的电流传输长度(～0.2 μm)、更低的接触电阻(～1072 Ω)和有效接触电阻率(～1×10^-4Ω·cm²), 能够满足TFT 阵列高导互联的要求.     

Autaptic modulation-induced neuronal electrical activities and wave propagation on network under electromagnetic induction

Based on an improved HR neuron model, the effects of electrical and chemical autapses on the firing activities of single neurons are studied, and the wave propagation in forward feedback neural network is also discussed by considering autapstic regulation under different intensities of electromagnetic induction. It is found that the electrical activities of single neuron can be changed by exerting excitatory or inhibitory of electrical and chemical autapses. With different feedback gains of electromagnetic induction current, membrane potential shows the oscillatory solutions and steady states. Under the condition of different autapse or electromagnetic induction, the propagation of electrical activities caused by the central neuron is transformed in the forward feedback network. Moreover, the spatial synchronization of the network will be changed by choosing different coupling intensities and feedback gains. It is proved that the electrical and chemical autapses play a significant role in firing modes of single neuron and the wave propagation of the forward feedback networks under the electromagnetic induction.     

A facile in situ solvothermal method for two-dimensional layered g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/SnS<Subscript>2</Subscript> p-n heterojunction composites with efficient visible-light photocatalytic activity

To overcome the fast recombination rate of electron-hole pairs of individual SnS₂, p-n heterojunction g-C₃N₄/SnS₂ composites were fabricated as high-efficiency visible-light photocatalyst to photodegradate the organic dye MB. The morphologies, structures, compositions, and photocatalytic properties were characterized. The SnS₂ shows two-dimensional layer structure with an average thickness of 20 nm and diameter size of about 2 μm, and the g-C₃N₄ nanoflakes were uniformly deposited on the surface of SnS₂ nanosheets. In comparison with the bare g-C₃N₄ and SnS₂, the composites show improved photocatalytic activity under visible light, which is sensitive to the content of g-C₃N₄. In particular, the 15% g-C₃N₄/SnS₂ composites exhibit the highest photocatalytic activity and outstanding reusability, which can degrade 88.01% MB after only 1 h in the visible light (λ?>?420 nm) range. The g-C₃N₄/SnS₂ heterojunction composites show outstanding reusability after four times cycling experiments. The improved photocatalytic activities of composites are attributed to abundant active species, increased charge separation, and decreased electron-hole pair recombination, which originated from the large specific surface area and efficient interfacial transport of photo-induced charge carriers between SnS₂ and g-C₃N₄. These results suggest that the two-dimensional layered g-C₃N₄/SnS₂ p-n heterojunction composites are promised to be a high-efficiency visible-light photocatalyst.     

自动显微图像处理系统的研制

为实现病理切片的自动检测研制了一套显微图像处理系统。该系统由三目照相生物显微镜、ＣＣＤ摄像机和带图像处理卡的个人计算机组成。本文介绍显微镜的自动调焦、自动搜索及状态分析判断等系统驱动功能的原理和设计，最后给出该系统临床应用的部分结果     

Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulate

Particulate calcium carbonate is treated by polystyrene (PS)/polyacrylic acid (PAA) block copolymer with varied amount. Coating efficiency is obtained by measuring the dissolve curve. The results of near-infrared (NIR) analysis reveal the thickness and structural information of the surface polymer layer. The alignment of PS-b-PAA chain on and the interaction of carboxyl with the calcite surface are deduced on the basis of X-ray photoelectron spectroscopy (XPS) results.     

利用频闪结构光测量旋转叶片的三维面形

在对快速甚至高速运动物体进行研究时,需要对运动物体各个时刻的三维面形和形变量进行数字化描述。提出了一种利用频闪光作为结构照明光源,基于傅里叶变换轮廓术对旋转叶片每个时刻的三维面形和变形量进行动态测量的光学方法。使用自行设计的同步控制单元对风扇叶片旋转位置进行检测,用该检测信号同步驱动频闪结构光源的发光和图像采集系统“冻结”记录下旋转叶片表面变形条纹的瞬时图像,再运用傅里叶变换轮廓术计算出每一瞬间时刻旋转叶片的三维面形,分析这些三维面形数字化结果可以进一步得到旋转叶片的变形量。通过对家用电风扇的实验,验证了该方法的合理性和可行性。该方法可望在高速运动物体的面形和变形研究上有广泛运用。     

多孔氧化铝模板制备ZnS纳米线阵列及其光致发光谱

利用阳极氧化铝（AAO）模板,采用电化学沉积方法制备出了ZnS纳米线阵列。扫描电子显微镜（SEM）结果显示,AAO模板孔洞分布均匀,孔径基本一致（约50nm）,孔口呈六边形。TEM结果显示硫化锌纳米线的直径约50nm（与AAM模板孔径一致）,长度约为20μm（与AAM模板厚度一致）。电子衍射结果表明ZnS纳米线为多晶结构。比较了AAO模板组装ZnS纳米线阵列前后的光致发光谱,所得光谱显示,组装了ZnS纳米线阵列的模板的光致发光谱比没有组装的空模板相比多出两个发射峰,分别位于409,430nm,且其发光强度随激发波长的增长而增强。解谱分析表明,这即为ZnS纳米线阵列的发光光谱的两个发射峰,是由导带与受主能级间的跃迁发光和施主与受主能级间的复合跃迁发光共同作用所致。发现由于纳米线尺寸的单一性,发射峰窄化明显,半峰全宽较小,这种现象在其他文献中未曾报道过。     

Mn替代对Dy2AlFe16-xMnx化合物的结构和磁性的影响

通过X射线衍射及磁测量手段研究了Dy2AlFe16-xMnx化合物的结构和磁性.研究结果表明Dy2AlFe16-xMnx化合物具有六角相的Th2Ni17型结构.对x=1,2的样品采用X射线热膨胀测定法在104-647K的温度范围内测量了其热膨胀性质,发现这些化合物在低温下存在热膨胀反常现象,在居里点附近出现负膨胀性质.对自发磁致伸缩的研究结果表明Dy2AlFe16-xMnx化合物中存在着较强的各向异性的自发磁致伸缩,随着Mn含量的增加,其低温下的自发体磁致伸缩减弱.磁测量结果表明Mn的替代导致Dy2AlFe16-xMnx化合物的居里温度及自发磁化强度急剧下降.     

激光声源特性研究及海洋应用

激光声作为水下声源的一种新的激发方法,具有高声强、窄脉冲、宽频谱等优点。基于激光声激发的线性及非线性理论,建立了激光声信号特性的初步模型,研究了激光在水中激发声波的特性,研究表明：在热膨胀激发状态,增大激光光强可以提高激光声的转换效率;光强大于击穿阈值后,激光声的激发机制为非线性的光击穿机制。激光声具有的高距离分辨能力和海洋抗干扰能力,对水下目标探测、空载平台等领域有着较广的应用前景。