Morin applied in speciation of aluminium in natural waters and biological samples by reversed-phase high-performance liquid chromatography with fluorescence detection

A reversed-phase high-performance liquid chromatographic method with fluorescence detection for the determination of labile monomeric aluminium has been developed through pre-column complexation using morin as the analytical reagent. The highly fluorescent aluminium-morin complex (excitation wavelength 418 nm, emission wavelength 490 nm) was separated on a Spherisorb ODS 2 column with an eluent consisting of 30% methanol and 70% water (pH 1.0 with perchloric acid). The most remarkable point of this protocol was that only the most toxic aluminium species, that is, free aqua-aluminium ion and its monomeric hydroxo complex ions, selectively respond among various aluminium complexes. This strategy has been successfully applied to direct fractionation of the toxic aluminium in natural waters and biological samples without any pretreatment.     

catena‐Poly[[copper(II)‐μ‐2‐[bis­(2‐pyridylmeth­yl)amino]butyrato‐κ4N,N′,N′′,O:κO′] perchlorate]

The copper(II) ion in the syn–anti carboxyl­ate‐bridged one‐dimensional zigzag chain title complex, {[Cu(C₁₆H₁₈N₃O₂)]ClO₄}_n, exhibits a distorted trigonal–bipyramidal environment. Two N atoms and one carboxyl­ate O atom of the ligand form the basal plane, while the axial positions are filled by an N atom of the ligand and one O atom belonging to the carboxyl­ate group of an adjacent mol­ecule. The crystal packing is enhanced by C—H⋯O(perchlorate) hydrogen bonds.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Unique Fluxional Behavior. Synthesis, Structure, and Properties of Novel (Diamine)platinum(II) Complexes of 9-Fluorenylidene- and Benzhydrylidenemalonate Ligands

New (diamine)platinum(II) complexes A(2)PtX(2) (A(2) = trans-(+/-)-1,2-diaminocyclohexane (DACH), tetrahydro-4H-pyran-4,4-diylbis(methylamine)(THPDMA); X(2) = 9-fluorenylidenemalonate(FM), benzhydrylidenemalonate(BHM)) have been synthesized and characterized by means of multinuclear NMR spectroscopy and X-ray analysis. (DACH)Pt(FM) crystallizes in space group P2(1)/c with eight formula units in a cell of dimensions a = 20.071(7) ?, b = 12.717(3) ?, c = 24.512(6) ?, beta = 103.25(2) degrees, and V = 6090(3) ?.(3) (DACH)Pt(BHM) crystallizes in space group P&onemacr; with four molecular units in a cell of dimensions a = 11.048(3) ?, b = 13.639(3) ?, c = 14.043(6) ?, alpha = 90.17(3) degrees, beta = 91.31(4) degrees, gamma = 89.98(3) degrees, and V = 2116(1) ?(3). The platinum atom in both complexes adopts a typical square planar arrangement with two nitrogen atoms in cis position. The 9-fluorenylidene and benzhydrylidene groups of the amine ligands chelated to platinum are strikingly bent up by 88.8(3) and 80.8(2) degrees, respectively, from the platinum square plane in the solid state. Variable temperature (1)H NMR spectra of the title complexes in dimethyl sulfoxide solution reveals that the amine proton resonances are sensitive to the fluxional motion of the remote arylidene groups, and suggests that interconversion occurs between two "bent-up" and "bent-down" forms. The prominent difference between the FM and BHM complexes is observed in solution, due to the presence or absence of the angle constraint of the anionic coligands.     

Self-assembly of rectangles and prisms via a molecular "clip"

Aromatic molecular "clips" bearing two symmetrically bound platinum moieties have been prepared. The molecular "clip" 4 readily self-assembled with linear linkers such as 4,4'-bipyridyl, 1,4-bis[2-(4-isocyano-3,5-diisopropylphenyl)ethynyl]benzene, and nicotinic acid to form molecular rectangles. The overall dimensions of the rectangle 7 were 7.3 Angstroms x 15.3 Angstroms. The molecular "clip" also self-assembled with tritopic pyridyl and isocyanide ligands to form trigonal prismatic frameworks. The characterization of the supramolecules by multinuclear NMR, electrospray mass spectrometry, and X-ray crystal structures is also reported.     

Synthesis of Novel Nucleoside Analog （3R）-2,3-Dideoxy-3-（N-hydroxy-N-methylamino）-L-arabinofuranosyl Uracil

The synthesis of novel nucleoside analog (3R)-2,3-dideoxy-3-(N-hydroxy-N-methylamino)-L-arabinofuranosyl uracil was studied. A twelve-step synthetic route, started from L-ascorbic acid, was designed, and the final product was obtained in 20.8% yield.     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

BBr3-promoted cyclization to produce ladder-type conjugated polymer

A novel chemical cyclization method using BBr₃ has been successfully developed to prepare ladder-type conjugated systems. The cyclized ladder compounds revealed an extended conjugation due to planarization of the structures. The extended ladder polymer can also be easily prepared by our chemical cyclization method using a soluble precursor.     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.     

A convenient catalytic approach to synthesize straight boron nitride nanotubes using synergic nitrogen source

Straight boron nitride nanotubes (BNNTs) with pure hexagonal phase were conveniently prepared by heating the mixture of Mg(BO₂)₂ · H₂O, NH₄Cl, NaN₃ and Mg powder in an autoclave at 600 °C for 20–60 h. These BNNTs had diameters mainly ranging 30–300 nm and lengths up to 5 μm, and a majority of them had at least one closed end. Besides the traditional end tips, additional cone-like tips were frequently found to be attached on the BNNTs. The effects of temperature, reactants and the possible mechanism of the catalytic formation of the BNNTs are discussed.